All Activity

Here's what I have: JVC-NZ800 projector (4096x2160 native, 8K e-shiftX, 17:9) Panamorph lens (1.35x vertical compression) 130" CIH masking screen, range 2.40:1=>16:9 in 1% steps Custom scripts/plugins/shaders for movie scaling, screen masking, projector control, tone mapping, ... When running Emby Theater UI through this system it renders to the full imager resolution, which is 17:9, and is then compressed vertically through the lens and finally gets displayed on the 2.40:1 screen. The entire UI is displayed on the screen but is squashed by 1.35x due to the lens. It would be great if Emby Theater had an option to adjust the horizontal scale to give more area for screen elements and bring the items back to their original aspects. If this was viewed on a system without a lens it would look stretched vertically but the horizontal scale was increased by 1.35, or a virtual display of 4096x2160 => 5530x2160. There could be basically 2 options. Option 1, UI crop. Option 2, UI scale. That would give users the ability to crop the UI to fit nicely in a scope screen without a lens, like 2.35 and others users with lenses to scale the UI to correct for lens scaling. That's what I want. Oh, does that make me lucky number 7.

If you mean to apply the overlays on season images.... I will try but not quite sure how emby handles season images. i will do my research Yes I have just created a buy me a coffee link The project is completely free to use. If you'd like to support the development, I've added a voluntary support link: Support the project: http://buymeacoffee.com/amanade3

Hi Ebr, although not as originally intended, it does work perfectly for this scenario. it’s a bit more nuanced than being extras as it’s really 1 event, broken into multiple sections. It is always only one event, eg ufc fight night XXX and then during that event there will be a prelim section that is free to watch (to entice you to buy the main event) and then the main event itself. As I have fight pass I record them both and then add them to the same episode and just rename the end of the file -prelim or -main event. rather than merging the files together to have 1 giant event, it’s better to be able to select the section you want to watch, so you can get to the specific fight you want quicker. the only issue is that the order isn’t always correct, but on the grand scheme of things doesn’t really matter, but for the more traditional logic of say theatrical vs extended, it would be nice that theatrical is always first in the list as the director’s cut always comes chronologically after. I also do it for episodes of tv shows when they split into part 1, part 2 on the disk (or on tv cos they need to be only 1hr segments) but tvdb for example doesn’t give them separate episode numbers. This way the metadata lines up and Happens more often than you think. being able to select a version via a dropdown is one of the main reasons I moved from plex and is a lot more than just using it to select a format more compatible with your player, eg 4k and 720p

New release V 1.3.7.0 Excluded Season 1 from New Season detection (toggleable), single-season shows no longer misfire the blue badge. Added a new orange "New Episode" fallback badge for existing shows with recently added episodes that don't qualify for any other badge EmbyNewOverlay.dll

Hello ebr, I hadn't mentioned where I instigated the download - it was under "download to" as you suggest, and there is only one user on the server. Does that make a difference?... Thank you

You can follow the GitHub link above to see how it works. Since these are static, unchanging lists of 100 films, we just store their values inside the compiled plugin. The largest part of the plugin are the images it uses for the Collections, without them it would be a 450K file. Sample list complied into the plugin natively: https://github.com/bespokedb/AFI-100-Plugin/blob/main/Data/TenthAnniversary2007List.cs

Hi. Are you sure the download was setup by the same user? It looks like you used "download to" instead of setting up the download in the actual client under the user in question...

But what about protocol? Are you sure those are the same? The browser may be using https while the app http...

The vast majority of your content should be already working fine. It was just this one wonky crop that threw thing awry. I would say, however, that you should set your Shield to 4K unless you truly believe that your display panel does a better job of upscaling. As far as the UI is concerned, it doesn't matter - that is in 1080 all the time anyway.

Hi. From where and how does it obtain the lists?

Hello Luke, Sure: - Series: It's always sunny in philadephia - Episodes: All seasons, season 12, "S12:E2 - The Gang Goes to a Water Park" For S12E02, the android log shows the video finishing downloading at 11:02:46, being deleted at 11:05:38, and being queued for download again at 11:05:41. Please find more logs and screenshots attached. Thank you! emby-android-redacted.txt embyserver-redacted.txt

HI there, can you please provide a specific example? How to Report a Problem Thanks !

Hello, I am using a collection, e.g. "_OFFLINE TV" to download certain shows to android clients. I have "Download unplayed videos only" toggled on the download jobs, but they seem to continuously attempt to download the full series anyway. I have one show that is marked as completely watched - so I just want new episodes to automatically download. It seems like instead of not downloading new shows, it might be downloading and then attempting to pruned episodes marked as watched only after? It is hard to tell though what exactly its doing, its just been downloading for ages. I've tried updating the app, deleting and recreating the download jobs, marking unwatched and watched again. I am running emby server 4.9.5.0 and emby for android 3.5.53 (the previous version of emby for android before this last update had the same behavior).

كيف احصل على عنوان IP or Domain

Yes I already reported this issue further up on this page Hopefully we'll see a fix for it soon.

HI, please check out our quick start guide: Quick Start

هل من خوادم متاحه استطيع الدخول عليها او التسجيل عن طرقيها ؟emby انا مشترك جديد ولا يوجد لدي اي خادم من خوادم

Sorry about that. It was reported in multiple places against more than one app. I didn't go around to every single topic and update them all.

That's only the folder name. can you please show us everything? Thanks.

Hi, I would try doing a new server connection and entering the address manually and see if that helps.

By type then by name. In the case of Hercules it would be //E:media/movies/H/Hercules (2014)

OK, let's see how the next build compares. Thanks.

Thank you so much for this great plugin! When I fill in several mdblist URLs within one source, only the data from the first link is fetched, and the subsequent ones are ignored. https://mdblist.com/lists/hdlists/based-on-or-inspired-by-a-true-story https://mdblist.com/lists/dr-jones-md/based-on-a-true-story-4u0gic5dfi https://mdblist.com/lists/hilman153/based-on-or-inspired-by-a-true-story https://mdblist.com/lists/k0meta/based_on_true_story_movies Only the first link's 249 items will be crawled. Log: [04:00:53] [Top-List] No top-lists configured. [04:01:02] [Top-List] No top-lists configured. [04:02:03] [Top-List] No top-lists configured. [10:40:58] [HSC] ══════════════════════════════════════════════════ [10:40:58] [HSC] Home Screen Companion v4.1.4.0 · 2026-08-31 10:40 (single-entry run) [10:40:58] [HSC] Library: 19138 movies, 1569 series [10:40:58] [HSC] ══════════════════════════════════════════════════ [10:41:38] [HSC] [10:41:38] [HSC] [1/1] 真实故事改编 [真实故事改编] (External) [10:41:38] [HSC] List: 249 objects · 280 matched in library [10:41:38] [HSC] Tag: +280 added, -0 removed [10:41:38] [HSC] Collection: updated (+269, -57)

Totally understand. Thanks for the detailed explanation.

First, used to do this all the time because the Brower app let me do some things that the windows or android app didn't do, not germane here. Second, my roku and android emby apps are connected through Emby Connect and are working just fine. Third, I checked the address in the server information on the web app and it is my router's address. I checked port forwarding and that address is correct, too. Roku and Emby windows and Emby Android apps are working so those addresses had to be correct since I always use Emby Connect. Fourth, I use Emby.media/connect and use name and password in Emby Connect AND up pops my server list. That's how I got the Emby IP of record. Fifth, I get a long wait and then an large error statement saying can't reach my emby server try again later. Sixth, get on my emby app on my android phone with network disconnected so it has to go off the network the Emby server is on. Connects in seonds. Seventh, do the same thing on my Window 11 laptop connected to my phone so not on the same internal network (I do LOVE your flexibility). Same route, same select server, same try again later.