jglazer63 17 Posted November 5, 2018 Share Posted November 5, 2018 I am looking at migrating away from MYSQL to emby for Kodi. I can't figure out which of these two addons are better. I want to keep the interface for kodi with some adjustments. I think Emby for Kodi is the best source for this but I am not sure how the different Kodi installations will sync with Emby in a timely fashion. If I add something to my library, how long before emby sees it and syncs with all the Kodis I have? Thanks! Link to comment Share on other sites More sharing options...
LongMan 89 Posted November 5, 2018 Share Posted November 5, 2018 If the client is on, it syncs immediately. If a client is off, the sync occurs as soon as the client connects to the server. Link to comment Share on other sites More sharing options...
jglazer63 17 Posted November 5, 2018 Author Share Posted November 5, 2018 If the client is on, it syncs immediately. If a client is off, the sync occurs as soon as the client connects to the server. Which addon are you referring to here? Link to comment Share on other sites More sharing options...
LongMan 89 Posted November 5, 2018 Share Posted November 5, 2018 Also the beta version of Emby for Kodi allows you to choose which libraries get synced. Before a library is synced, or if you choose not to sync it, it is available as a dynamic link similar to what occurs in EmbyCon. Link to comment Share on other sites More sharing options...
LongMan 89 Posted November 5, 2018 Share Posted November 5, 2018 Emby for Kodi is the only one that syncs. EmbyCon only offers dynamic links. Link to comment Share on other sites More sharing options...
LongMan 89 Posted November 5, 2018 Share Posted November 5, 2018 Does that help? Link to comment Share on other sites More sharing options...
im85288 1493 Posted November 5, 2018 Share Posted November 5, 2018 Think of EmbyCon being what you have when you use any app (eg web client, iOS, Android etc etc) in that on startup it always gets the latest info from your server (so NO sync with local kodi db needed) With Emby for Kodi it will emulate your local kodi db by keeping things in sync. This is maybe more beneficial with low powered devices which may be slow to gather the initial data. Link to comment Share on other sites More sharing options...
K1ng_Lear 185 Posted December 24, 2018 Share Posted December 24, 2018 Hi there, I am actually considering to switch over from PLEX with PKC to EMBY. So I've a few questions and one could maybe answered here. Starts a movie wie Emby for Kodi faster than with PKC and Plex? Oh, I've always ran into some trouble by setting up direct pathes so I don't want to try it out with EMBY. Kodi Client: Nvidia Shield Server: Synology DS 916+ Thx. Link to comment Share on other sites More sharing options...
sualfred 677 Posted December 24, 2018 Share Posted December 24, 2018 PKC is a fork of Emby for Kodi. You can run it with native paths or with addon playback. Native playback is always faster but has no support for the cinema mode for example and requires direct access to the share of the files. Here, I just jumped into the sleeping room to show you how fast the addon playback with cinema mode works on a shield. On a wired connection it's even faster: 1 Link to comment Share on other sites More sharing options...
K1ng_Lear 185 Posted December 27, 2018 Share Posted December 27, 2018 Ok, thx, for the vid. I will check out the emby for kodi set up on my shield. I am using the Titan skin and the start of movie feels like eternity (up to 60s). So, I will test it on my xmas vacancy. Link to comment Share on other sites More sharing options...
sualfred 677 Posted December 27, 2018 Share Posted December 27, 2018 Titan is very expensive and not maintained anymore. You can also try EmbyCon that doesn't sync the content and acts like a normal video addon. But we made a 100% integration in Embuary that gives you almost the same feeling like you would running a native database. Up to you. Link to comment Share on other sites More sharing options...
K1ng_Lear 185 Posted December 27, 2018 Share Posted December 27, 2018 I thought that Titan is more EMBY friendly due to there is Emby option in the settings. Link to comment Share on other sites More sharing options...
sualfred 677 Posted December 27, 2018 Share Posted December 27, 2018 Emby for Kodi does not need any skin based integration. As I said, Titan isn't maintained anymore. It's also not 100% compatible to Kodi 18 (Leia). Link to comment Share on other sites More sharing options...
sualfred 677 Posted December 28, 2018 Share Posted December 28, 2018 Don't say RIP to early, but the last compatiblity commit on GitHub was in Nov'17. Link to comment Share on other sites More sharing options...
K1ng_Lear 185 Posted December 28, 2018 Share Posted December 28, 2018 Wow, I am literally flashed. I tried EMBYCon today and my content never starts so fast. So by by PLEX and hello EMBY. I still have a few questions. When I set up my quicklinks I don’t get the library instead I got the folders. I split up my library in different folders to due to my backup strategy and my whole structure must be reset if I change this. Can I set up a part of my library with embycon and the rest with EMBY for Kodi? I set up EMBY for Kodi, too, but the libraries remain empty. I can browse through the tree structure but nothing appears. Is it possible to avoid the Login with EMBY for Kodi? My wife is driving crazy if she have to do this. And yes, I need it, my kids shouldn’t have access to every content from their room. Maybe I did something wrong, so sorry for the stupid questions. Link to comment Share on other sites More sharing options...
sualfred 677 Posted December 28, 2018 Share Posted December 28, 2018 You can use Emby for Kodi + EmbyCon at the same time. You also just can use Emby for Kodi and sync only the libraries you want and access the other via the addon as plugin listing. Emby for Kodi doesn't require a login on a reboot. Do you have the beta installed? If no, please switch to it. If you still have problems -> please post a log (normal one). Link to comment Share on other sites More sharing options...
K1ng_Lear 185 Posted December 29, 2018 Share Posted December 29, 2018 Thank you very much. The Beta repo solved the problem and I was able to set it up. Unfortunately I ran into a further issue. When I set up directly to the TV shows I don't get a proper set up. (Picture 1 to 3), when I stop one step further in the set up tree I've to navigate to the add on but all the shown set up is ok (Picture 4 to 6). Oh, I tried EmbyCon here, too, but it offers me the multiple path structure of my library and this isn't handy. (Picture 7) Sorry, that I've to bother you again, but I hope you can help me out. Link to comment Share on other sites More sharing options...
sualfred 677 Posted December 29, 2018 Share Posted December 29, 2018 I proceed in DE to prevent language barriers. -- Also was genau funzt nicht? Kann dir nicht folgen. Auch bin ich verwirrt ob du jetzt Emby for Kodi oder EmbyCon benutzt. Link to comment Share on other sites More sharing options...
K1ng_Lear 185 Posted December 29, 2018 Share Posted December 29, 2018 I proceed in DE to prevent language barriers. -- Also was genau funzt nicht? Kann dir nicht folgen. Auch bin ich verwirrt ob du jetzt Emby for Kodi oder EmbyCon benutzt. Ok, sind zwei Themen. Bild Serie 1-3 bzw. 4-6 stammen aus Emby für Kodi. Wenn ich direkt auf den Pfad aufsetze bekomme ich keine saubere Darstellung der Serien mehr. Wenn man dann im Bild 3 etwas mit mehreren Staffeln auswählt bekommt man nur noch die EMBY eigene Indizierung zu sehen. Wenn man währen des Setup nicht ganz bis zur Bibliothek runter geht sondern immer über das normale Menü in die Tiefe navigiert (Bild 5) passt alles. Eigentlich würde ich lieber auf Embycon setzen aber da bekomme ich das Problem (Bild 7) das die Bibliothek in zwei Verzeichnissen liegt und ich nur das eine oder das andere auswählen kann. Wähle ich stattdessen "TV-Shows All" mischt er mir die Anime Bibliothek mit rein. Interessanterweise liegen die Filme auch in mehreren Ordnern, DVD, BlueRay RAW und BlueRay nach Handbrake und dort sammelt er (Embycon) mir die ganze Bibliothek wie es sich gehört. Kurz: Ein Problem mit Quicklinks bei Emby for Kodi (Bild 1-6) und eines mit EmbyCon. Nochmals Dank für die Mühe und sorry, dass ich offensichtlich zu dämlich bin. Link to comment Share on other sites More sharing options...
sualfred 677 Posted December 29, 2018 Share Posted December 29, 2018 Dämlich ist daran nichts. Ich glaub eher das da irgendwas vom Skin her reinspinnt. Du hast bei Emby for Kodi schon die Datenbanken gesynced oder? Also nicht nur Hybrid Listing? Du kannst parallel zum Test meinen Embuary skin probieren ob da auch das Problem auftritt. Link to comment Share on other sites More sharing options...
K1ng_Lear 185 Posted December 29, 2018 Share Posted December 29, 2018 Dämlich ist daran nichts. Ich glaub eher das da irgendwas vom Skin her reinspinnt. Du hast bei Emby for Kodi schon die Datenbanken gesynced oder? Also nicht nur Hybrid Listing? Du kannst parallel zum Test meinen Embuary skin probieren ob da auch das Problem auftritt. Ja, die DB ist gesynced. Hatte ca. 15 min. gedauert. Das Probleme tritt hier nicht direkt auf, aber in ähnlicher Form. Der Standard Pfad zeigt mir auch hier wieder, nach dem Dashboard, die Poster (Bild 1 & 2). Die reine TV Show library, also ohne vorhergehendem Dashboard, zeigt mir stattdessen FanArt (Bild 3). Ist aber nicht so wirr wie in Aeon Nox da ich im Anschluss in einer Listenansicht lande welche sich aber von der normalen unterscheidet und auch nicht auf diese ändern lässt. Ich glaub ich weiß woran das liegt, er zeigt mir im oberen Menürand eine Auswahl an die eigentlich nur für Musik Sinn macht, also irgendwo würfelt er da was. (Bild 8) Das EmbyCon Thema habe ich nach wie vor. (Bild 4 - 6) Ein ähnliches Thema habe ich mit EmbyCon auch bei den Filmen, fällt aber nur in Deinem Skin, übrigens tolle Arbeit, auf. (Bild 7) Wenn Du Logs brauchst müsstest Du mir sagen wie ich an die rankomme. Ich kann mich mit SMB von meinen Mac nicht auf das Shield verbinden und der Versuch das SMB des Mac runterzusetzen auf 1 war nicht so erfolgreich. P.S. Würde das Aeon Nox UI bevorzugen, wenn es denn möglich ist. (Sorry, EMBY Standard UI gefällt mir halt net.) Link to comment Share on other sites More sharing options...
sualfred 677 Posted December 29, 2018 Share Posted December 29, 2018 Ich zwinge dir kein Skin auf, mir gings nur darum ob der Skin reinspinnt. Was ja anscheinend der Fall ist, da es in Embuary funktioniert. Da sind uns dann leider die Hände gebunden. Ist in Aeon Nox die normale Serien Ansicht aber korrekt, oder? Also Problem betrifft nur die Nodes, welche du manuell anlegst? Wenn ja, dann brauch ich mal deine script-skinshortcuts-includes.xml aus dem Skin Ordner um zu sehen, was das Skinshortcuts Script da fabriziert hat. Du kannst auf der Shield einfach den x-plorer oder ES explorer nutzen und von dort aus die Dateien auf ein Stick kopieren, falls SMB scheitert. Bei dem EmbyCon Thema würde ich dir empfehlen das Problem seperat in einem eigenen Thread zu beschreiben und deine Struktur dabei mitzuteilen. Das ist die Baustelle von null_pointer. Link to comment Share on other sites More sharing options...
K1ng_Lear 185 Posted December 30, 2018 Share Posted December 30, 2018 Ich hab's nicht so empfunden, dass Du mir was aufzwingen wolltest. :-) Ich denke nicht, dass die Funktionalität in Embuary voll gegeben ist. Embuary generiert ja letztendlich ebenfalls einen Musikeintrag. (siehe Bild 8 meines letzten Posts). Vielen Dank im übrigen für den Tip mit dem ES Explorer. Jetzt kann ich auch zur klassischen Emby App die Logs ziehen. :-) Ich habe jetzt im Aeon Skin ebenfalls nochmals einen Eintrag angelegt und Dir die script-skinshortcuts-includes.xml von Embuary und Aeon Nox in das Zip gepackt. Ich hab Dir auch noch ein Bild angefügt wie der Link in Aeon Nox aussieht. Bezüglich des EmbyCon Themas mache ich, wie von Dir vorgeschlagen, einen neuen Thread auf. P.S. Ich bin echt begeistert von dem Support hier. Als langjähriger Plex Pass Nutzer ist man dies nicht gewohnt. Fazit: Du bist unter anderem Schuld daran das ich gestern Abend noch Emby Premiere gezeichnet hab. :-) Archiv.zip Link to comment Share on other sites More sharing options...
sualfred 677 Posted December 30, 2018 Share Posted December 30, 2018 Das bringt dir nicht soviel das rüberkopieren. Skinshortcuts nutzt Hash Caches. Aber ich vermute ich sehe das Problem:Skinshortcuts definiert den Pfad als Musikpfad anstatt für Videos. Ändere in Aeon Nox bitte einfach mal den Pfad manuell ab und ersetzte ActivateWindow(music,plugin:....) durch ActivateWindow(videos,plugin:....) Das ist ein alter und lang existierender Bug in dem Skript. Mangels Maintainer wird der aber nicht gefixt. In Embuary habe ich ein Skin Workaround deswegen gebaut, da fällt dir der Bug nicht auf. Danke für die Premiere Subscription, aber ich hab nichts mit Emby in finanzieller Sicht am Hut Ich bin nur ein User. 1 Link to comment Share on other sites More sharing options...
K1ng_Lear 185 Posted December 30, 2018 Share Posted December 30, 2018 Danke für die Hilfe. Das war's. Sobald ich das umgestellt habe hat er einwandfrei gearbeitet. Danke nochmal. Link to comment Share on other sites More sharing options...
Recommended Posts