spyke562 0 Posted October 30, 2018 Share Posted October 30, 2018 Hello Everyone, I must be missing something and could use a little help. I went in my HDHomeRun Lineup and marked a bunch of channels as favorites (yellow start next to each channel). The rest of the channels I left alone and they just show an empty gray star. I don't really want to totally remove them as I want my WMC HTPC to browse them if needed. I was hoping to check a few channels as favorites, refresh guide data, and only show the favs while watching live tv from my emby app. I am using HDHomeRun and Schedules Direst. Thanks for any assistance, Ian... Link to comment Share on other sites More sharing options...
Luke 37161 Posted October 30, 2018 Share Posted October 30, 2018 Hi, in Emby, you can configure your HDHR tuner to only import favorite channels. Make sure that is checked and then refresh the guide in Emby. Thanks. Link to comment Share on other sites More sharing options...
spyke562 0 Posted October 30, 2018 Author Share Posted October 30, 2018 Hi Luke, Thanks for the reply! I can confirm that in Live TV -> Live TV Tuner Setup I had both check boxes checked for "Restrict to channels marked as favorite" and "Allow hardware transcoding". I ran the Refresh Guide Data but it still shows ALL channels in the Live TV Guide. I do see the scheduled task for Refresh Guide completed successfully and that it has been running. I also see that if I go into Live TV -> TV Guide Data Providers -> Schedule Direct settings the channels I have marked as favorite in my HDHR lineup are showing as Mapped. But still if I go to Live TV -> Guide it shows ALL channels. Is there anything else I can look at? Thanks again... Link to comment Share on other sites More sharing options...
Luke 37161 Posted October 30, 2018 Share Posted October 30, 2018 I would double check your favorites in the hdhr web interface. Link to comment Share on other sites More sharing options...
spyke562 0 Posted October 31, 2018 Author Share Posted October 31, 2018 (edited) Sure thing...here is a snippet of my hdhm lineup. The yellows are my favorites which are the only channels I am expecting to see in my guide. As for the other channels I was hopeing to leave them grayed out. Will this work this way? I didn't want to X them out as I want my WMC HTPC to see them if I choose to watch them from here. Thanks again... Edited October 31, 2018 by spyke562 Link to comment Share on other sites More sharing options...
Luke 37161 Posted October 31, 2018 Share Posted October 31, 2018 And then how did you configure the tuner in emby? Link to comment Share on other sites More sharing options...
spyke562 0 Posted November 1, 2018 Author Share Posted November 1, 2018 I originally set up the tuner using the wizard from the Emby menu. It auto detected and checked both the boxes to only show favs and transcode. Should I have done something different? Link to comment Share on other sites More sharing options...
Luke 37161 Posted November 1, 2018 Share Posted November 1, 2018 What does it look like now if you click on it in the live tv section? Link to comment Share on other sites More sharing options...
spyke562 0 Posted November 2, 2018 Author Share Posted November 2, 2018 Right now I still see ALL channel and not just the ones I marked as favorite. In the Live TV -> Tuner Devices menu I see my HDHomerun tile along with the Schedule Direct tile under Guide Data Providers Thanks for sticking with me on this! Link to comment Share on other sites More sharing options...
Luke 37161 Posted November 2, 2018 Share Posted November 2, 2018 Hi, what do you see when you click on the HD Homerun tuner? Link to comment Share on other sites More sharing options...
spyke562 0 Posted November 2, 2018 Author Share Posted November 2, 2018 When I click on my turner i see the IP address and the two check boxes i mentioned above. Attached are some of my settings Link to comment Share on other sites More sharing options...
Luke 37161 Posted November 3, 2018 Share Posted November 3, 2018 And from that screenshot, what channels are not supposed to be present? Link to comment Share on other sites More sharing options...
spyke562 0 Posted November 3, 2018 Author Share Posted November 3, 2018 From the screen shot i am expecting to see only the channels in Mapped Channels Here is another screen shot of my HDHM Lineup where i have channels marked as favorites. What i am expecting is to see ONLY the channels I have stared as favorites...which those stared fav channels show up in my Mapped Channels like (above screenshot) But my Line TV Guide is still show EVERY channels that my turner sees instead of my favorites i have marked Link to comment Share on other sites More sharing options...
Luke 37161 Posted November 3, 2018 Share Posted November 3, 2018 Is the HDHR firmware up to date? Link to comment Share on other sites More sharing options...
spyke562 0 Posted November 4, 2018 Author Share Posted November 4, 2018 good idea but i have been on the latest for awhile now. 20180817 Link to comment Share on other sites More sharing options...
Luke 37161 Posted November 4, 2018 Share Posted November 4, 2018 can you provide the results from http://tunerip/lineup.json Thanks. Link to comment Share on other sites More sharing options...
ebr 14947 Posted November 4, 2018 Share Posted November 4, 2018 Can you show us a screenshot of the actual problem? So far, the only screen shot you've shown looks like the program is behaving properly (only your favorites are there). Link to comment Share on other sites More sharing options...
spyke562 0 Posted November 4, 2018 Author Share Posted November 4, 2018 (edited) Hey...no problem. What I have been trying to figure out and get help with is that I am seeing ALL channels in my Live TV guide via EMBY even though I have marked certain channels as favorites in my HDHR Lineup. As you can see and what I have been trying to explain is that when I go to Live TV I still see it starting with channel 2 - 12 (and rest of channels) instead of starting with only the favorite channels. I am not sure if this is expected behavior or not. I even X'd out the channels, refreshed the guide and they still show. EDIT: tunerlineup.json https://1drv.ms/f/s!ArP3kSdf4yyZzHCUTAuTp5Fh4tW- Edited November 4, 2018 by spyke562 Link to comment Share on other sites More sharing options...
ebr 14947 Posted November 5, 2018 Share Posted November 5, 2018 And you are positive you don't have any other tuners configured? Because, we saw when you looked at that tuner's channel mappings, that it was only getting the ones you had marked. (Also, please provide what Luke asked for above) Link to comment Share on other sites More sharing options...
Luke 37161 Posted November 5, 2018 Share Posted November 5, 2018 That hdhr json data isn't indicating favorites. I don't know why, but that's what we are using to perform the favorites filter. So that explains why it's not working. Link to comment Share on other sites More sharing options...
ebr 14947 Posted November 5, 2018 Share Posted November 5, 2018 You could actually disable the channels you don't want to show. That will probably work... Link to comment Share on other sites More sharing options...
spyke562 0 Posted November 6, 2018 Author Share Posted November 6, 2018 (edited) I have no other tuner setup at home. I believe the json data does show favorites, unless I am looking at it wrong But you can see I have channels 791 - 797 not favorited, but channels 799, 800, and 803 marked as favorites. The json data shows "Favorite 1" under the GuideNumber. EDIT: I did set some channels to disabled from the HDHM Lineup but the emby guide still shows them. I also just delete and re-setup the tuner, refreshed guide data and still same results. Is there a config file they needs to be changed or cleared out? I guess I will continue on and try other ways to fix the issue. GuideNumber "792"GuideName "WFMZDT"VideoCodec "H264"AudioCodec "AC3"HD 1URL "http://192.168.10.89:5004/auto/v792"239 GuideNumber "794"GuideName "WMCNDT"VideoCodec "H264"AudioCodec "AC3"HD 1URL "http://192.168.10.89:5004/auto/v794"240 GuideNumber "795"GuideName "WUVPDT"VideoCodec "MPEG2"AudioCodec "AC3"HD 1URL "http://192.168.10.89:5004/auto/v795"241 GuideNumber "796"GuideName "WWSIDT"VideoCodec "MPEG2"AudioCodec "AC3"HD 1URL "http://192.168.10.89:5004/auto/v796"242 GuideNumber "797"GuideName "WFPACD"VideoCodec "H264"AudioCodec "AC3"HD 1URL "http://192.168.10.89:5004/auto/v797"243 GuideNumber "799"GuideName "WPPXDT"VideoCodec "H264"AudioCodec "AC3"HD 1Favorite 1URL "http://192.168.10.89:5004/auto/v799"244 GuideNumber "800"GuideName "WNJNDT"VideoCodec "H264"AudioCodec "AC3"Favorite 1URL "http://192.168.10.89:5004/auto/v800"245 GuideNumber "802"GuideName "WDPNDT"VideoCodec "H264"AudioCodec "AC3"HD 1URL "http://192.168.10.89:5004/auto/v802"246 GuideNumber "803"GuideName "KYWDT"VideoCodec "MPEG2"AudioCodec "AC3"HD 1Favorite 1URL "http://192.168.10.89:5004/auto/v803"247 GuideNumber "804"GuideName "HSNHD"VideoCodec "H264"AudioCodec "AC3"HD 1URL "http://192.168.10.89:5004/auto/v804" Edited November 6, 2018 by spyke562 Link to comment Share on other sites More sharing options...
spyke562 0 Posted November 22, 2018 Author Share Posted November 22, 2018 Ok back again... I think I found the cause of my marked favorites not showing.While troubleshooting I went and downloaded and ran the portable version of emby server. After a fresh config I loaded my tuner and schedule direct info. When I went into Live TV and looked at the Guide it only showed my favorites!However, when I installed the Server WMC plugin and restarted the server ALL channels show back in the Guide. So I think Server WMC is causing my favorites not to load.When I uninstalled the SErver WMC plugin I only see my favorites again! Is there a way to get only favorites to show while using the Server WMC plugin? I like using the plugin because I like how it shows my recorded tv from my HTPC rather than adding the folder as a library.Thanks again... Link to comment Share on other sites More sharing options...
Luke 37161 Posted November 22, 2018 Share Posted November 22, 2018 That's something you'd have to take up with the serverwmc developer. I would suggest reviewing the settings of the server wmc app in case it might have some way to limit what channels it reports. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now