All Activity

i can configure jellyfin or vlc's (or haruna, or mpv) tone mapping to look like emby, but i cannot configure emby to look like i want it, unless im missing something in the form of custom parameters in an xml or something which ill gladly use. server is an intel N100, debian, docker.emby version: 4.9.5.0. backend is set as QSV, the lack of configuration options affects both qsv and vaapi based tone mapping settings, i have not tried software tone mapping as it probably wont work with this size file on this dual core n100 i am using the extraT opencl for both qsv and vaapi, and the only paramater, singular, it has is an option to chose reinhard, mobius, or hable with a notable lack of, at the very least one option, BT.2390. and others include, linear, clip, gamma. the latter 3, I can see why the choice would be made to exclude them transcode log is attached source: Format : HEVC Format/Info : High Efficiency Video Coding Format profile : Main 10@L5.1@High HDR format : Dolby Vision, Version 1.0, Profile 7.6, dvhe.07.06, BL+EL+RPU, no metadata compression, Blu-ray compatible / SMPTE ST 2086, Version HDR10, HDR10 compatible Codec ID : V_MPEGH/ISO/HEVC Duration : 3 h 35 min Bit rate : 48.9 Mb/s Width : 3 840 pixels Height : 2 160 pixels Display aspect ratio : 16:9 Frame rate mode : Constant Frame rate : 23.976 (24000/1001) FPS Color space : YUV Chroma subsampling : 4:2:0 (Type 2) Bit depth : 10 bits Bits/(Pixel*Frame) : 0.246 Stream size : 73.6 GiB (91%) Default : Yes Forced : No Color range : Limited Color primaries : BT.2020 Transfer characteristics : PQ Matrix coefficients : BT.2020 non-constant Mastering display color primaries : Display P3 Mastering display luminance : min: 0.0001 cd/m2, max: 1000 cd/m2 Original source medium : Blu-ray client was brave browser. transcoding because i set it to 4k 40mbps while testing configuration. but it looks wrong no matter why its being transcoded, or what device. ffmpeg-transcode-be75700c-e23c-4c08-9414-fab05eae32f3_1.txt

Having a issue with backup. I have tried a manual backups, reset the time and waited and nothing. embyserver.txt

What's the best way of introducing graphics (i.e. MTV style logo or similar top left or top right) over videos? I could re-encode my music files but that would take a while. Thanks

Hi, now that I have some time to work on Emby, there are a few things I'm hoping I can get some help figuring out. I have some movies that have two parts. Ex Lawrence of Arabia. I have both parts in one folder, one labeled Part 1 and the other Part 2. My Nvidia Shield using Emby sees both parts and when I click on the main title, it allows me to select either part 1 or part 2 but with Next Gen and using Estuary Mod V2 Omega it only sees part 1. Not sure how to get it to see both parts. Any assistance would be appreciated for that. As well, is there a way to change the order of the options on the top of the screen when I select Movies? Right now it dispays Recently Added, Last Watched, then Titles. I'd like to put Titles first. Not sure where to look to change that. Also, not sure if this is possible but on my emby server I have a TV Series Library and a TV Shows Library. The TV Shows Library is just for temp shows that I watch and delete and don't bother keeping. My Nvidia Shield TV sees both as separate, but using Next Gen/Estuary, it dumps them all into one called TV Shows. Is there a way that I can change something to separate them out? If someone can point me in the right direction, I'd greatly appreciate it.

Since the last update On Apple TV There are reading problems This is interrupted untimely It is very complicated to read content continuously

Hola a todos. Quería compartir con la comunidad un proyecto personal que he ido desarrollando para facilitar la creación, mantenimiento y automatización de playlists y colecciones de Emby. Se llama Emby Playlist Studio y la versión que comparto actualmente es la v1.7.2. Es una aplicación web que se ejecuta en Docker y trabaja sobre el contenido que YA existe en la biblioteca de Emby. No descarga películas ni series. Utiliza la API de Emby y TMDB para analizar metadatos, aplicar filtros y generar resultados dinámicos. Actualmente está probado en Synology DSM 7.x con Container Manager / Docker. No lo he probado personalmente en otros NAS o sistemas como QNAP, Unraid, TrueNAS o Docker Desktop, por lo que agradecería cualquier prueba de compatibilidad en otros entornos. ¿QUÉ PUEDE HACER? - Crear playlists inteligentes. - Crear colecciones / BoxSets. - Crear ambas cosas desde una misma regla. - Trabajar con películas, series o contenido mixto. - Filtrar por año, década, género, actor, director/creador, productora, país, idioma, valoración, keywords, duración y otros criterios. - Utilizar fuentes dinámicas de TMDB: tendencias, populares, top valoradas, estrenos, series en emisión, etc. - Incluir presets preparados para décadas, mejores títulos, animación, ciencia ficción, Marvel, DC, Star Wars, cine español y más. - Ejecutar reglas manualmente, diariamente o semanalmente. - Trabajar en modo "Solo añadir" o "Sincronización exacta". - Administrar playlists y colecciones ya existentes. - Seleccionar y eliminar varios contenedores a la vez sin borrar las películas o series de la biblioteca. - Mostrar progreso en procesos largos. - Utilizarse desde PC o móvil mediante una interfaz responsive. - Incluye además una utilidad opcional para relacionar usuarios de Emby con dispositivos renombrados siguiendo un patrón como -- USUARIO-1, -- USUARIO-2, etc., con análisis previo, backup y verificación. PELÍCULAS Y SERIES Las reglas pueden ser: - Películas. - Series. - Películas + Series. En las colecciones, una serie puede mantenerse como elemento Series. En las playlists, las series se representan mediante episodios reproducibles, pudiendo elegir entre todos los episodios o solamente el primero. TMDB TMDB se utiliza como fuente de metadatos y rankings, pero Studio siempre cruza los resultados con la biblioteca de Emby. Si un título no existe en vuestro servidor, Studio no lo añade. REQUISITOS PRINCIPALES - Synology DSM + Container Manager / Docker en el entorno probado. - Emby Server. - Una API Key de Emby creada específicamente para esta integración. - Una cuenta de TMDB y su API Read Access Token. - Un usuario administrador/propietario de Emby para las funciones que requieren una sesión real de usuario. - Acceso SSH al NAS para la instalación inicial. INSTALACIÓN Adjunto una guía HTML completa, responsive y autocontenida. Basta con abrir index.html en el navegador. Incluye: - Creación de la API Key de Emby. - Obtención del API Read Access Token de TMDB. - Elección de la carpeta/volumen de DSM. - Configuración del archivo .env. - Comandos de instalación y actualización. - Backups. - Primera prueba recomendada. - Problemas frecuentes. - Seguridad. La edición comunidad usa rutas relativas para config y backups, por lo que puede instalarse en /volume1, /volume2, /volume3, etc. sin estar vinculada a mi estructura personal. CAMBIO IMPORTANTE EN v1.7.2 Desde esta versión, la sincronización del contenido y la colaboración de playlists están completamente separadas. Una sincronización normal ya NO ejecuta MakePublic, MakePrivate ni permisos ACL al terminar. Esto evita que una playlist correctamente actualizada muestre después un 403 de MakePublic y parezca que toda la sincronización ha fallado. La colaboración se modifica únicamente cuando el usuario lo solicita desde el gestor de playlists. La visibilidad inicial configurada en una regla solo se intenta al crear una playlist nueva. COLABORACIÓN / PERMISOS La gestión de Privado / Colaborativo / View / Editar depende de la versión y las políticas de usuario de Emby, por lo que considero esta parte opcional/experimental. Lo importante es que, desde v1.7.2, cualquier problema de colaboración queda separado de la sincronización normal de contenido. SEGURIDAD DEL ZIP PUBLICADO El ZIP de comunidad está preparado específicamente para compartirlo y no contiene: - Mi archivo .env. - API Key de Emby. - Token de TMDB. - AccessTokens de Emby. - Contraseñas. - APP_SECRET real. - Bases de datos. - Caché. - Historial. - Backups. - Datos personales de mi servidor. Solo contiene .env.example con valores de ejemplo. También incorpora .dockerignore para evitar que .env, config, tokens, backups o bases de datos puedan copiarse accidentalmente dentro de una imagen Docker durante una reconstrucción. IMPORTANTE Este proyecto no es oficial de Emby y no está afiliado al equipo de Emby ni a TMDB. Es un proyecto personal/comunitario que comparto por si puede ser útil a otros usuarios. Si alguien lo prueba en otro NAS o sistema, agradecería que indicase: - Sistema/NAS. - Versión de Docker. - Versión de Emby. - Si funcionó directamente o necesitó cambios. - Errores encontrados. Y si publicáis logs, recordad eliminar previamente cualquier API key, token, contraseña, dominio privado o IP pública. Cualquier sugerencia, nuevo preset, mejora, error o prueba en otros entornos será bienvenida. EMBY_PLAYLIST_STUDIO_COMUNIDAD_v1.7.1.zip

As stated previously, Genre Cleaner plugin should be able to take care of those rogue genres.

I guess Logs from that No logs no issue, only hear say

Before anyone can say whether this is a bug, a config issue, or a genuine gap, it would help a lot to know exactly what you're running. Could you post: **Hardware / host** - CPU and GPU (exact model — e.g. i5-12500 with UHD 770, or GTX 1660, or an AMD APU) - OS, and whether Emby is bare metal, Docker, or a NAS package **Emby config** - Emby Server version - Which hardware acceleration backend you have selected (QSV, NVENC, VA-API, AMF, none) - Which tone mapping option you're using, and the values you have for the tone mapping parameters if you've touched them - A transcode log from one of the bad playbacks — that shows the exact filter chain being built, which is the single most useful thing here **Source and client** - Is the source HDR10, HLG, or Dolby Vision? If DV, which profile? Profile 5 in particular has no usable HDR10 base layer, and washed-out or oversaturated output on that is expected behaviour rather than a tone mapping quality problem - Bit depth and codec of the file - Which client and device, and whether it's transcoding because of bandwidth, codec, or subtitle burn-in With the transcode log and the source details, it should be fairly quick to tell whether you're hitting a known limitation, a missing runtime, or something worth filing.

at the risk of sounding rude, or like a karen/kevin, I'm going to be frank, this is now unacceptable. a few years ago, this could be ignored. but if this isnt resolved in a few months, and i cant write a pugin to fix it, this organization going to be 5 bucks a month poorer unless you can tell me how one fixes this? but my instincts say "thats the neat thing; you dont!" none of the three whole entire tone map options we have do anything close to something watchable for me. I'm literally paying for color saturation, banding, and artifacts, while two free options can do this well this MUST be addressed. And as a monthly paying customer for more than half a decade, the $500 of my money you have should get me more than this. I feel i deserve an explanation for why it hasn't been addressed, and an eta for when it will be addressed. i am a developer, i understand it takes time, testing, but the deadline is near, if not here.

I still get the category, Sci-Fi, even if I manually delete it from the database. And there are no entries in the genre either, so shouldn't be there anyway. Yet after forced removal, sure enough, a few days later, the category returns. The same goes for the Sport genre. No entries, yet it still shows up in the list. Remove them - change/add nothing. The stay gone for a few days, and then they're back.

Quick Start

I don't understand why I have no user Because They are watching the movie

Show all movie you want to watch

Update: Cleaning up the plugin. one more bug to fix. If no other bugs arise, I will upload the new beta very soon

We’ve discussed this. HAL is under strict instructions not to lock the pod bay doors. I didnt just want remote access to HAL, that is way too easy, i needed to create a command-and-control infrastructure that healed itself. Learned a lot, not so easy...

Its been 84 years....

New Release v1.0.0.3 EmbyVision Credits. https://github.com/encryptedcity/EmbyVision-Credits/releases/tag/v1.0.0.3

Did you install the cinema intros addon on the server? On Emby server nothing needs to be configured. Emby for kodi addon just uses Emby server as a trailer source. The configuration for the trailes are all done by Kodi addon.

That ended up being the trick. I didn't realize that 12.x wasn't in stable. I uninstalled everything. Installed both repos. Installed the 10.x "video service" which by default installed 11.x of the "service" add-on. Eventually I was able to update that to 12.x. All seems to be working now.

it was hardcoded top-left, which was a decision i made. Next build adds a position setting: four corners plus top/bottom centre. One thing worth knowing: Emby draws its own unwatched-episode count in the top-right corner, so if you pick that the two will sit next to each other. Top-left is the default because most key art leaves that corner clear. Added

Your device does not support HEVC. Please do not use the PCE-I slot for more sata, you would be better off to spend the money on an inexpensive Quadro card, and in the distant future, UPGRADE your "potato" UNRAID system. You're not going to be buying hard drives anytime soon with current prices, so buying an HBA is not exactly a smart move. When prices do finally come down, you would be advised to not only upgrade your MB/CPU, but also your case, quite possibly to a diskshelf.

There isn't a trailer library in my Emby libraries, but I could create one and have it point to the folder containing my trailers. Is that what you mean? And what settings would I need to configure in the Emby plugin settings under the “Cinema” section?

Previously mentioned New Overlay plugin.

Yes, I will do that now where is the screenshot from?