All Activity

I have 2 shared folders on my Synology NAS that where not manually created. Due to timing, I have good reason to think that EMBY created them automatically. - photos - video Can these empty folders by deleted? Is there a reference published that can confirm they were created by EMBY?

When I enter the PIN generated by the Emby Trakt plugin on https://trakt.tv/activate, Trakt returns: "The code XXXXXXXX is invalid. Your device should be displaying an 8 character code." The PIN is generated directly by the Emby Trakt plugin and entered immediately after generation.

trying uninstall and I get this message, any idea?

I hope the issue gets resolved soon. It can be really frustrating when an app suddenly stops opening after an update, especially on older iPads. Keeping compatibility with legacy devices is always a challenge, but clear communication from the developers makes a big difference. On Android, I've had a smoother experience with streaming apps like Dixmaxapks.es, which focus on simple navigation and reliable performance across a wide range of devices. Hopefully the next Emby update fixes the remaining iOS issues for everyone.

Could you please upload another log? My apologies for the extra request. I’m currently implementing the Android badge and icon based on guidance from the Emby team, and I will be sure to address that fix as well.

HAL is something very fundamental (Hardware Abstraction Layer). Beyond that, I cannot say much more - PC support is not really our expertise, but maybe some community member has an idea what it could be. Thanks

I've open the Windows Event log and there are several ERRORS they say HAL I've attached the screen shot

Nope, exact same error as before.

Ok so i found out that for dolby atmos truehd to work you need a streaming device connected to tv so naturally i bought nvidia shiled pro and with it all my problems of ai upscaling and subtitles should go away. I just wanted to check with you if i got this correct. To play on OLED65G51LW via nvidia shiled pro that has emby app i should configure in emby app settings and turn on Match video resolution This forces the device to output the 1080p signal over the HDMI cable, allowing the TV's AI processor to perform the upscaling. And if this wont work i will report a media playback issue.

@sh0rtyDid the new update work?

Hello GreatSandstone, ** This is an auto reply ** Please wait for someone from staff support or our members to reply to you. It's recommended to provide more info, as it explain in this thread: Thank you. Emby Team

Summary When the Emby Web client requests transcoding with TranscodingMaxAudioChannels=2 (stereo), Emby ignores this constraint if the source audio codec already matches the target codec (AAC→AAC). Instead of downmixing the 5.1 source to stereo, Emby uses -c:a:0 copy in the FFmpeg command, passing the full 5.1 audio stream through to the client unchanged. This results in clients receiving 5.1 channel audio when they requested stereo, which causes audio/video desync on browsers (Firefox/macOS confirmed) with limited bandwidth connections. Environment Emby Server: 4.9.5.0 Client: Emby Web 4.9.5.0, Firefox 149 on macOS 10.15 Transcoding: Hardware (NVDEC/NVENC, GTX 1060) Source file: MKV container, HEVC video, AAC 5.1 audio Steps to Reproduce Have a media file with AAC 5.1 audio (6 channels). Play it from the Emby Web client (browser) on a connection slow enough to require transcoding. Transcoding is triggered here due to ContainerBitrateExceedsLimit. The client sends the HLS manifest request with AudioCodec=aac&AudioBitrate=320000&TranscodingMaxAudioChannels=2. Observe that the FFmpeg transcoding command generated by Emby uses -c:a:0 copy for the audio stream, despite the TranscodingMaxAudioChannels=2 constraint. Result: The output HLS segments contain 5.1 AAC audio. The browser receives and attempts to play 6-channel audio when it requested 2 channels, causing desync. Expected Behaviour When TranscodingMaxAudioChannels=2 is included in the client request, and the source audio has more than 2 channels, Emby should transcode the audio to stereo (e.g. -c:a:0 aac -ac 2) regardless of whether the source codec matches the target codec. Actual Behaviour Emby generates the following FFmpeg command (relevant portion): -c:a:0 copy -metadata:s:a:0 language=eng -disposition:a:0 default The source stream is AAC 5.1 at 447 Kbps. The client requested AAC at 320 Kbps, max 2 channels. Because the codec (AAC) matches, Emby skips audio transcoding entirely, ignoring both the channel limit and the bitrate limit. There is also a related issue: Emby's media detection reports the audio stream bitrate as 320,000 bps, but ffprobe reads the actual bitrate from the file metadata as 447,245 bps. Because Emby believes the source bitrate equals the requested budget (320,000 = 320,000), it concludes no transcoding is needed. This may be contributing to the decision to stream-copy. From the FFmpeg log, the source stream is detected as: Stream #0:1(eng): Audio: aac (LC), 48000 Hz, 5.1, fltp, Start-Time 0.020s (default) BPS: 447245 But Emby's own media info JSON for the same stream reports: "Codec": "aac", "BitRate": 320000, "Channels": 6 Disclaimer: Claude was used to help identify the issue and sort through the logs. It has written the summary with a great deal of authority, although it is definitely possible there is a configuration oversight we are both missing. ffmpeg-transcode-4adf667c-6450-4842-aa79-63d6aeca9f87_1.txt embyserver-63918795788.txt

Hi, what I am looking to do is be able to view all the programs in the guide (whatever time range is available) to see just programs that are "Premiere" or "New" for example. I currently find myself using other sites to see what shows are premiering (date/time) then go back into emby go to that date/time in the guide and setup the recording for that program. It would be great if I could just go into the LiveTV component on the web and see all the programs that are showing as premiere that are in the current future guide data. I was thinking if there was just another tab like the "Recordings" or "Series" ones for Premiere? (I will leave that to the Dev Team on where it would be best of course).\ Thanks, Erik

Still do what I said: Check Windows Event Log and Antivirus - this is not normal what you've seen. No.

Hi. There is no "stop" on the remote but we'll need to look at an example as requested by Luke. Thanks.

This morning I woke up and didn't have the " Need to install error" when I opened my PC, so I at least thats gone. I'm wondering when downloading the server, should i be selecting "beta Channel"?

Thanks, Babatom, for bringing up this topic. I'm not sure whether Emby has collected data on how many users are in the Apple ecosystem compared to Android. However, I think it's very common for people who have an Apple TV 4K in their living room to also own an iPhone or other Apple devices. My personal impression is that Emby tends to focus more on developing features and improving the UI for Android devices than for Apple devices. Some people here may say, "You can just use Infuse instead of the Emby app." I do have the Infuse app, but I honestly want to use the Emby app for everything because I don't like switching between apps. I appreciate the work Luke and SamE have done on Spotlight integration and other improvements. However, as Babatom mentioned, as an Apple user I would really like to see more focus on Apple devices, especially the Emby app for Apple TV 4K. Infuse is a great option, but it should be an alternative—not a replacement for the Emby app. Thank you.

Yes I am I created a new account thinking i could start fresh

Apple Silicon does support hardware video encoding/decoding through VideoToolbox, so it should work in the right setup. I’d check the Emby server logs to see if VideoToolbox is actually being called, and make sure you’re using a native ARM build rather than running through Rosetta. Some codecs also won’t trigger hardware acceleration.

The downloads section should show items that Emby has actually started downloading through the app, not regular iOS file downloads. If nothing appears, check that the download is still active and that the app has storage permissions. Sometimes downloads can fail silently if there isn’t enough space or the server connection drops.

Emby’s dynamic playlists are a bit limited by default. You can try using filters like recently added or unwatched criteria when creating playlists, but for more advanced rules (genre, mood, avoiding repeats) you may need plugins or manage playlists externally. The repeat issue could also be related to the shuffle algorithm rather than your library.

Hola, he pagado la suscripción vitalicia de Emby y quisiera conectarme a un servidor. Pero cuando me quiero conectar este me dice que desbloquee la función de Emby Premiere. He pagado más de 100 € y no puedo acceder a los servicios ni se donde conectar mi clave de Emby .... Me siento que he pagado y no obtengo los servicios que quiero ... ¿hay algo que se me escape? Agradecería la ayuda

You’re better off going for an Intel CPU with an integrated GPU; QSV is ideal for transcoding. I’ve built myself a Unraid server and I’m very happy with it

Server is 12 years old? Check your CMOS battery.