All Activity

Imma look into my crystal ball that is placed in my pram along the yellow brick road and completely 100% guess what your network infrastructure looks like. Give me a minute. Ok, maybe two minutes.... It's a common issue it seems. It only works for the 100's or 1000's of people that may use EMBY. It ONLY works for alot of people. These generalized statements are soliciting a visceral reaction from me.

Latest log: line 339 Available from US server. Delayed and domain causes error in traceroute from VPN Switzerland. Does th .ass file include any special request for font or other custom details from mb3admin.com? If so, then this .ass file may fail when used on a server outside of North America. This could be caused by some setting of the domain owner at their host to limit traffic from overseas. What commands do the .ass files have in their headers?

I can access the NAS remotely using EZConbect but Emby shows as "not supporting relay conbections" if I try to.open it from ADM. If I try the new port (I changed it) on my WAN address I just get the same old "Can't reach this page" error (connection_refused) ... And now I can't connect to NAS2 remotely. So that made things worse.

I spoke too soon: we cannot connect to Emby today from any device, including the Mac we are running Emby on. Our current network setup is pointing to an external drive attached to the Mac. Both devices are powered on and running. We plan to get a dedicated server soon (like Synology) that can house our media and always be on. Would this be a better solution?

Ok it says I need an ASUSTOR ID which I don't know... So I created new and mistyped my email, which I now cannot edit. I get a warning that there are two NAS on my network using the same port (and so there are but at different IPs). I can change the ports one of them uses later. But meanwhile it says "certain port forwarding configurations were not successfully enabled." - but doesn't tell me which.

Thanks, I'll take a look. Meanwhile, for some reason when I changed port forwarding to point to NAS2, it connected to the second NAS remotely. Switching it back to point to NAS1, I can still access NAS2 remotely as if the port forward is still pointing to it (but the router shows the port forwarded to NAS1 even after rebooting the router - very strange indeed). Looking at Emby configuration for the two NAS shows it to be identical (apart from IP address, but I mean all the user and network remote settings). I shall look at "EZ router) tomorrow (my time) - or later tonight if I get a chance. Thanks again

If you have plex working maybe it's just a question of opening/port forwarding the specific Emby ports? Ask AI about how to test if specific ports are open.

Which may mean the ports are not open on the Nas. Open Settings on t main page of the nas. Go to manual connect. Choose EZ Router on the top of that menu. Check and see if the ports you want are open in the NAS firewall. If not, click on the "Self Define" button and create a rule to open those ports. Don't worry about the router ports, that only works if you use UPNP which is strongly discouraged for security reasons.

Which of the troubleshooting steps that you found in those threads did you try?

Self-host wrote a piece about Jellyfin's recent member departure. Self-Host Weekly (24 July 2026)

Hello Dad1607, ** This is an auto reply ** Please wait for someone from staff support or our members to reply to you. It's recommended to provide more info, as it explain in this thread: Thank you. Emby Team

trying to work out the problem with remote connection to the server. internally, i can connect and view my media on any device. externally, i cannot connect, message = unable to reach .... (its the same picture i have found on every thread ive read with this issue) i thought maybe it was the VPN, i removed said vpn to test the theory, i can rule that out as i get same issue, i have tried with several devices, so i can again rule out one device, i cant rule out the pc that i have emby setup on, though i have plex and have no issue remotely with that. short of throwing my toys out the pram and uninstalling, does anyone have any idea? ive searched the web, but no answers.

I am glad you like it! I would love to have it work inside of the emby app, but unfortunately the emby app itself isn't open source, so I what I am able to do with the app is very limited. I am hoping the developers here will see the value in my plugin and maybe work with me to make it work in the app one day. But keep testing it and let me know what I can fix or add to make the experience better. And thanks again!

@LukeWhile I am sure the Emby team is busy, it would be great to see this issue addressed. The last message I had from the Terramaster was that they had identified some "transcoding and video streaming compatibility issues" and were working closely with Emby to troubleshoot them. This causes me to wonder if the unresolved transcoding issues I had reported to Emby previously might also be addressed. Any update on progress would be appreciated.

Hi, I was using Jellyfin and it has some issues. No offense to the Jellyfin devs. I am sure they're doing an awesome job considering Jellyfins popularity. However, Jellyfins addon/extension culture is REALLY messed up and disorganized and you can't find any REAL and CLEAR troubleshooting information on some of the plugins I wanted to use that were just messing up everything. New user for Emby. Fairly new for Linux (about 2yrs now) I have a NTFS formatted media drive I want IT to be the media drive for Emby on Linux I have mounted it in fstab, installed Emby Here is my fstab | # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a device; this may # be used with UUID= as a more robust way to name devices that works even if # disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> UUID=5A63-0C29 /efi vfat fmask=0137,dmask=0027 0 2 UUID=4da47b34-3c7d-4740-992f-d01034c393c5 / ext4 noatime 0 1 UUID=bf62f847-7d2d-4d96-8778-105aeb2289c7 swap swap defaults 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 UUID="4A1CFAC97DF19F28" /mnt/Media ntfs uid=64522,gid=64522,dmask=022,fmask=133 noatime 0 0 #UUID="4A1CFAC97DF19F28" /mnt/Media ntfs defaults,noatime 0 0 #UUID="881e4150-2e3b-4eab-bace-62664c8c37e3" /mnt noatime 0 0 I would like to know the proper format to implement the proper permissions for emby (gid=64522) on the media drive. In my example above, do you think this will work? I just spent 3 days copying media fails over so I would rather NOT re-format the drive to ext (but I will if that means no issues will playback for all users in my home). Currently, I have a samba share on the media server to allow me to backup the main NTFS formatted media drive (attached to my personal desktop). I dod this because I also have a windows 2016 server file server and media server that runs if/when the Linux media server one gets borked and I have to fix it. I've been using Jellyfin and lots of "hardly any documentation to troubleshoot add-ons and extensions" and it gets messed up all the time purely through my own ignorance of the ext/add-on system and Jellyfins lack of control over it and documentation on most of it as Jelly provides hardly ANY useful add-ons and extensions and it looks like crap without them.SO, is what it is. I don't want to get down on the Jellyfin devs though, that is not my point here, I am 100% sure that my Jellyfin issues are due to my own ignorance and so Jellyfin is not for me. I started over with Jellyfin 5 times before saying <insert bad word here and add "it"> and purchasing Emby instead. SO, I'm done with Jellfin and am now here where I now have a professionally purchased media server that is NOT <insert bad word here> PLEX! My main goal with THIS thread is to get the proper permissions et on the NTFS media share so everyone in the house can use Emby clients to access the server OR to find out it cannot be done and reformat the media share drive to ext4 and start over again in order to accomplish that? I have two media share users my admin user (same as the samba share) ME my 1 user (same as the samba share) home is the username this is my smb.conf [Media] comment = Samba Share path = /mnt/Media/ valid users = ME home public = no writable = yes printable = no create mask = 0765 THANK YOU all for any help forthcoming.

Is this supposed to work on the latest build of Emby 4.9.5.0? I saw someone else say they had the same issue but it got fixed with ver.1.0.2.3. I don't seem to have any scrollbars to fill in all the fields and save.

ok way cool... I am trying for years to get this to work over through emby. My hats off to you for starting something like this.. Bravo.... I got my to work just fine the int he web. but do you know what would be way killer. I just bought a Nivdia shield TV pro with game controller. Got emby instilled on it. NOW what will be cool if I could load a game through the shield to play game freely on the TV. If you would like to take this offline with me I would be willing to support on this ideal.

Same issue, cost me about 1 hour trying to fix my browsers and network and etc., finally realized it's an emby issue.

Hi. Please also provide the full ffmpeg log. Thanks.

https://www.xda-developers.com/from-plex-to-jellyfin-everyone-forgot-the-media-server-in-the-middle/

It works through notifications. Not as flexible as the Trakt thing but pretty reliable.

Well @sh0rtyi have an nascent plugin created but whilst looking for this i noticed its already been done earlier this month lol. Hopefully there is enough interesting included to warrant publishing it now.

Purpose and Function Populate a Sync Channel Folder tree structure with rule based fetches from Sonarr and Radarr. Assign 1 or more rule based fetches to root and subfolders in the folder tree. Name/Rename Subfolders. Drag and drop UI (Groups, Conditions, Logic, Operators, Fields) to create rule sets. Realtime feedback on resultset to aid rule creation. Default placeholder video for "Coming Soon" functionality. Movies and Series support Emby's trailer functionality. Support for Emby's provider id function under "edit metadata" to provide links from Emby to Radarr/Sonarr. Support for image collage generation on subfolders, to show the most recent additions to the folder. Currently Movies and Series Endpoints are supported for Movies and Series Objects. (should be simplish to add more). Fields for rules are instantiated dynamically based on endpoint response. Learning foreign API fetching, Emby channels, IHASWEBPAGES and Claude coding. Primarily built from a feature request by a forum member for coming soon functionality but it morphed into more of a generic channel sync, hence the name. Getting Started SyncChannelGuide.mp4 Create a connection (eg to Radarr/Sonarr), Create a rule set or use a default rule set, assign to a folder in the folder tree. Tweak your preferred re-sync trigger (default 15 minutes) Disclaimers Vibe coded with Claude, backup database before 1st use until tested, special care/test server first if already using channels with volatile data (this is my first channel plugin). This is alpha with limited testing. This isnt something i use, so development will be in repsonse to feedback/requests (its a learning project). Download https://github.com/ginjaninja1/SyncChannel 0.0.0.3 Emby.SyncChannel.dll Changes Known Issues UI corruption during rule drag and drop, residual objects on screen. [refresh page to workaround] TMDBID/TVDBID allocation sometimes missing [1 of]. Connection test failure doesnt gracefully recover from https>http failure. [refresh page to workaround] Adding multiple fetches to the same folder unknown. Issues and suggestions welcome. Roadmap [potential] Make logging better / user friendly. More careful consideration over watched status. more careful consideration over refresh optimisation and api load. Support for a custom video placeholder/ multiple image placeholders. learn a bit more about css to make the plugin look like it belongs better. If channels could be instantiated at runtime (dont think they can), then plugin could support multiple root folders. Expose the endpoint parameterisation, to support syncing supported media/channel items generically with any api. Other Info Plugin stores data in \programdata\data\channel-sync (good to know if you want to reset/uninstall)

Hi, Luke. any news about that future?