VA API in Docker

Docker usage on Unraid as sample

\flash\config\go

#enable module for iGPU and perms for the render device
modprobe i915
chown -R nobody:users /dev/dri
chmod -R 777 /dev/dri

docker run command extra parameter

--device /dev/dri:/dev/dri/dri:/dev/dri`

that's it

i can only speak for intel here, but latest 3 gens i6, i7, i8 ... its for the end user side all there is ... enable intel on the host vie the go file, give the docker access ... either via the extra parameter in docker run OR by privileged access. that's it to get all features running with vaapi, decoding all formats from the site, encoding to h264 QuickSync ...another story which i don't really know (not needed in any way here cause vaapi does the job). when i remember there are no special drivers or so needed on most NAS system on intel base like freenas, unraid, etc ... also the boxes like synology etc are ready out of the box.

AMD or Nvidia are rather different cause there is always a driver issue somewhere ... i also tried to get nvidia working with my plex docker before and ended up in switching (take the intel for host and use for dockers, pass the nvidia for my VM).

so in the end, its those 2 steps up there ... may someone with a synology or so can tell if its even just a click in the webui ...

NVIDIA in Docker

Tested with P2000 on Debian 9 (stretch)

Install nvidia drivers

https://www.nvidia.com/Download/driverResults.aspx/140135/en-us for latest

To test drivers run nvidia-smi

Expected output:

> nvidia-smi
$Date
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 410.66       Driver Version: 410.66       CUDA Version: 10.0     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  Quadro P2000        Off  | 00000000:83:00.0 Off |                  N/A |
| 68%   40C    P0    19W /  75W |      0MiB /  5059MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|  No running processes found                                                 |
+-----------------------------------------------------------------------------+

Install nvidia-docker2
- https://github.com/NVIDIA/nvidia-docker

Either edit docker daemon or set runtime arg

My docker daemon: /etc/docker/daemon.json

"runtimes": {
    "nvidia": {
        "path": "nvidia-container-runtime",
        "runtimeArgs": []
    }
},
    "default-runtime": "nvidia"
}

Required Docker environment variables
- NVIDIA_VISIBLE_DEVICES=all
- NVIDIA_DRIVER_CAPABILITIES=compute,utility,video

VA API in Docker

NVIDIA in Docker

Tested with P2000 on Debian 9 (stretch)

Further Reading