Guest Posted May 14, 2021 Share Posted May 14, 2021 And on todays episode of 'This OLD House'... or is The Money Pit.. LMAO.. Link to comment Share on other sites More sharing options...
chef 3745 Posted May 14, 2021 Author Share Posted May 14, 2021 (edited) 34 minutes ago, BAlGaInTl said: That's so clean. I'm impressed. It makes me want to fish some cables through my old house... maybe not. I'm running my UniFi controller in a docker, but I would love to move it off my main server. Do you have any links to the stuff you used for your RPi? That looks really cool. Yes! This is how I added the Unifi Controller to the Raspberry Pi: https://pimylifeup.com/rasberry-pi-unifi/ Fishing wires through you house is actually easier then you might think. That is... If you have drywall walls. If it is lath and plaster it is harder. Don't be afraid to cut holes in your drywall everywhere in your home. You can patch and paint, and it is very easy to do. The "California Patch" is the trick to fixing holes! At first my wife thought I was crazy cutting holes everywhere, but it was super simple to patch, and I know more about what is happening inside the walls of my home. If you ever rip the ceiling out of your basement, that is the time to run CAT wiring because you can access the main floor. Just remember that your basement walls are actually inset from your main floor exterior walls (because your house is sitting on top of them) when you are measuring to access the inside of your walls on the main floor. That is literally the trickiest part. But once you figure it out, it becomes really easy to pull the wires through. It will also add value and update your home, if it is wired. I purchased this long drill bit for making holes: I was able to cut though most of my joists for lighting, and push through sub floor into my walls upstairs, to run CAT6. I had to use a hammer drill to get through some areas because we have an addition, and I had to go through the concrete foundation, but mostly I used the long fishing drill bit. Keep you scrap drywall. That is super important! So you can make your California Patches. Then go around your house and cut holes everywhere! Your wife will love you for it! . I was able to remodel my basement by myself in four weeks. All new 14/2 wiring (read you local wiring code before attempting it). I went to "YouTube University" to learn it all. Edited May 14, 2021 by chef 1 Link to comment Share on other sites More sharing options...
Guest Posted May 14, 2021 Share Posted May 14, 2021 Better than wasting 15 years of your life in the construction industry. Link to comment Share on other sites More sharing options...
chef 3745 Posted May 15, 2021 Author Share Posted May 15, 2021 Okay here is a couple tricks to getting the Raspberry Pi running Unifi with a small screen on your network. After you install Raspberry Pi OS 1. Open the boot drive on you machine you etched the raspberry pi OS on. 2. In the "Boot" drive add a file called "SSH" without any extension. This tells the Raspberry Pi to enable SSH on boot. This means you can do everything without ever attaching a keyboard or mouse to your Pi. 3. Follow the link I posted above to install Unifi Controller. That will load the controller and it will tell the pi to load it on boot. 4. In the Pi "autostart" file tell the pi to load chrome browser to open the Unifi web service with the "--kiosk" param, to make it fill screen. Link to comment Share on other sites More sharing options...
rbjtech 4223 Posted May 15, 2021 Share Posted May 15, 2021 (edited) Nice - love the controller idea - that does look cool I run mine as a service on windows, it's web based so can control it via any web browser on any device I like but having as a dedicated device does have it's advantages. Edited May 15, 2021 by rbjtech Link to comment Share on other sites More sharing options...
chef 3745 Posted May 23, 2021 Author Share Posted May 23, 2021 I'm putting a rush on things now. The network panel has been upgraded to Ubiquiti stuff. The cable management needs some follow up. I have flooring arriving tomorrow. to finally finish this project. It has been to long, but trying to get materials has been a nightmare. 1 Link to comment Share on other sites More sharing options...
chef 3745 Posted May 29, 2021 Author Share Posted May 29, 2021 TA-freakin'-DA! [small tear in my eye] 8 Link to comment Share on other sites More sharing options...
BillOatman 496 Posted June 1, 2021 Share Posted June 1, 2021 Looking good @chef... now you just need to fill up all that empty space! 1 Link to comment Share on other sites More sharing options...
chef 3745 Posted June 5, 2021 Author Share Posted June 5, 2021 (edited) Filling up a bit more, and got a third Unifi flex. Just gotta get my hands on a cheap (but decent) 4k tv... A big one.. and the wife can't find out until it's here and it's to late to return it Edited June 5, 2021 by chef Link to comment Share on other sites More sharing options...
BillOatman 496 Posted June 5, 2021 Share Posted June 5, 2021 (edited) The prices on the decent 4K TVs are actually starting to come down, even the big ones. But not at the combination of price and available content that I have pulled the trigger on yet either. But every once in a while there is a big sporting event available in 4K that makes me rethink my stance Edited June 5, 2021 by BillOatman 1 Link to comment Share on other sites More sharing options...
Carlo 4330 Posted June 17, 2021 Share Posted June 17, 2021 The nice thing about 720 or 1080 over 4K for sporting events is you don't "see" your home team suck as bad when they lose. LOL 1 2 Link to comment Share on other sites More sharing options...
BillOatman 496 Posted June 17, 2021 Share Posted June 17, 2021 58 minutes ago, cayars said: The nice thing about 720 or 1080 over 4K for sporting events is you don't "see" your home team suck as bad when they lose. LOL As a sabres fan thats a HUGE advantage 1 Link to comment Share on other sites More sharing options...
chef 3745 Posted June 29, 2021 Author Share Posted June 29, 2021 (edited) Got that 4k tv I wanted. But... (because there is always a "but")... The HDMI wire I spent extra on and feed through the wall when I built the place is faulty. The HDR on the movies look all snowy and the TV keeps switching between HDR and Power saving. Argh! What a let down. Prime Cables is going to hear from me tomorrow for sure. I spent over sixy bucks in a good HDMI cable for this exact purpose. Otherwise, the tv works awesome with my other HDMI cable. Edited June 30, 2021 by chef 1 Link to comment Share on other sites More sharing options...
BillOatman 496 Posted June 30, 2021 Share Posted June 30, 2021 Looks great @chef ! Link to comment Share on other sites More sharing options...
chef 3745 Posted July 7, 2021 Author Share Posted July 7, 2021 1 1 Link to comment Share on other sites More sharing options...
rbjtech 4223 Posted July 8, 2021 Share Posted July 8, 2021 On 30/06/2021 at 00:18, chef said: The HDMI wire I spent extra on and feed through the wall when I built the place is faulty. The HDR on the movies look all snowy and the TV keeps switching between HDR and Power saving. Argh! What a let down. Prime Cables is going to hear from me tomorrow for sure. I spent over sixy bucks in a good HDMI cable for this exact purpose. Arghhhh.. feel for you buddy. Experience will tell you to always TEST any cables before you board over them - and if possible, run the cables with 'pull strings' attached for specialist cables to allow you to pull the cable back out and/or feed a replacement in. Did you run the HDMI's in flex conduit ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now