Jump to content

安桥tx-nr609不能连接


Recommended Posts

251643711

我的sony电视dlan播放非常好,但是nr609就是不能播放

4.6.0.36也一样不能播放

Link to post
Share on other sites
251643711

从安桥的菜单里去浏览emby服务,点击播放后大概2分钟能播放,不知道是不是在解码了

 

Link to post
Share on other sites
Hxemby001

Number one, if you have the CoverArt Plugin .. uninstall it.. causing a lot of errors..

Also, have you enabled UPnP on your router or your devices which will not find/browse the DNLA3 share?

I did see an error which seemed to be from DNLA.. I am not for sure what device.. I did see several instances of where devices had connected and went to browse. One of those devices had a UPnP error.. So it looks like a connection/protocol error.

Link to post
Share on other sites
251643711

我还有一个sony电视机,直接播放到sony电视机可以的

其他是我另外建立了一个foobar2000的dlan,这个可以正常,用AirConnect转airplay可以dlan转成airplay播放

sony和安桥转了能连接没有声音

Link to post
Share on other sites
Hxemby001

The Onkyo nr-609 has no network connection.. (No DLNA)  BUT it will accept audio connection from almost any device ( including through HDMI )... My harmon/kardon will but it has a network connection in the back and will play anything it finds ( audio ) on the network. Actually did this myself, at one point.

IF the DNLA connection is being played by the TV, then you must run an audio out from the TV into the Onkyo. Usually your AV Receiver is hooked up to receive A/V input, then plays sound out through the speakers. and sends video to the TV/Monitor. For your TV to process the DNLA3 you will have to go from either CEC to the receiver or from an audio out port to an input on the back of the receiver.

I think this is what you want to know.. maybe ;)

Link to post
Share on other sites
251643711

肯定是有网络连接的,我直接用安桥上接受到的emby可以播放,就是播放需要等待1分钟左右,电视机是电视机的网络,安桥是安桥的网络,都在一个局域网的,这个肯定知道的

 

Link to post
Share on other sites
251643711

就是我现在有两个硬件支持dlan,一个是安桥,一个是sony电视机,还有一个我在pc上建立的foobar2000.用sony电视机和foobar都可以dlan连接,安桥功放不能正常使用。

airplay是用AirConnect转的,这个是另外一回事情

Link to post
Share on other sites
Hxemby001

So you are wanting to know why it waits so long to play? I am sorry translating isn't doing it's best.. LOL

Link to post
Share on other sites
251643711

应该就是翻译的问题,是在emby上操作不能播放,用安桥浏览到的文件播放需要等待1分钟左右才能播放,后面都能继续播放

只是希望能正常

每次都是你回答,谢谢!!!!!!!!

Link to post
Share on other sites
Hxemby001

I think it is normal for the time period, it is because the hardware is using its limited resources to decode, which is built-in my harmon/kardon takes a while to even list my directory... going directly to my NAS.. It is a huge archive.. with many files. Then it takes it a second to process... There are a couple of operations that take place during the process and I think that is the only thing you are seeing.

AND you are always welcome.

Edited by Hxemby001
Link to post
Share on other sites
251643711

你的意思是安桥在解码吗????

那如果丛emby播放也是需要等待

不能emby解码或者不用解码吗?

我的文件基本都是flac,我的安桥应该是可以直接播放不需要解码成mp3的

 

Link to post
Share on other sites
251643711

反而我的sony电视机应该是不支持flac的,他反而能很快播放不需要等待

 

Link to post
Share on other sites
Hxemby001

Right, this is why there are different profiles for devices. Some actually have the hardware to decode certain streams, while for compatibility it can get transcoded first.

My old PS3 for example.. will not play certain items that are not transcoded into something else first. I noticed this depending on which DNLA service I was using.. Windows 10 Network or DNLA3... ReadyNAS 316 DNLA3 ... or EMBY DNLA3.. 

The TV may have a profile already in emby making things more compatible.. while the Onkyo nr-609 may not.. I have not looked but this is a possibility.

Link to post
Share on other sites
Hxemby001

LOL.. Thats why I blast my audio through HDMI to my AVR...from my computer. I can use emby or whatever that.. AND I have an Microsoft Wireless Display Adapter which will do the same thing.. Good for the phone or anything else.

Link to post
Share on other sites
251643711

所以我现在只能用foobar2000来做这个事情了

emby连接不友好

 

Link to post
Share on other sites
Hxemby001

You could go into the advanced settings of DNLA in EMBY and create a custom profile for the Onkyo, I am not for sure of the specifications you would need but it is worth a shot..

Link to post
Share on other sites
251643711

有没有差不多的模板推荐的,我怕我改不好,是不是可以学习sony那个编辑

 

Link to post
Share on other sites
Hxemby001

Sometimes you can find the specification or requirements in manuals or online specs.. If you know a little about bitrates and transcoding, or basic types that it has played in the past.. it should be pretty simple. Trial and Error may render some good results though.

Link to post
Share on other sites
Luke

Your Onkyo reported these as the supported formats:

	DeviceDescription:
	FriendlyName:TX-NR609
	Manufacturer:ONKYO
	ManufacturerUrl:http://www.onkyo.com
	ModelDescription:AV Receiver
	ModelName:TX-NR609
	ModelNumber:TX-NR609
	ModelUrl:http://www.onkyo.com
	SerialNumber:
2021-04-04 21:54:58.348 Debug Dlna: Dlna Device.GetConnectionManagerProtocolAsync
2021-04-04 21:54:58.348 Debug HttpClient: GET http://192.168.50.66:8888/scpd/ConnectionManager_1
2021-04-04 21:54:58.352 Debug HttpClient: POST http://192.168.50.66:8888/upnp_control_1
2021-04-04 21:54:58.354 Info Dlna: Device GetProtocolInfoResponse Source: 
2021-04-04 21:54:58.354 Info Dlna: Device GetProtocolInfoResponse Sink: 
http-get:*:audio/L16;rate=48000;channels=2:DLNA.ORG_PN=LPCM
http-get:*:audio/L16;rate=48000;channels=1:DLNA.ORG_PN=LPCM
http-get:*:audio/L16;rate=44100;channels=2:DLNA.ORG_PN=LPCM
http-get:*:audio/L16;rate=44100;channels=1:DLNA.ORG_PN=LPCM
http-get:*:audio/mpeg:DLNA.ORG_PN=MP3
http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMABASE
http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMAFULL
http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMALSL
http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMDRM_WMABASE
http-get:*:audio/x-ms-wma:DLNA.ORG_PN=WMDRM_WMALSL
http-get:*:audio/vnd.dlna.adts:DLNA.ORG_PN=AAC_ADTS_320
http-get:*:audio/mp4:DLNA.ORG_PN=AAC_ISO_320
http-get:*:audio/3gpp:DLNA.ORG_PN=AAC_ISO_320
http-get:*:audio/wav:*

It does not list flac as being supported.

Link to post
Share on other sites

最初,重安桥的菜单去播放一样需要1分钟左右,emby直接播放也是没反应,不过我没有等待1分钟测试

今天晚上测试下看看,路由器搞挂了‘,如果有时间的话

 

 

Link to post
Share on other sites

今天测试一次先播放mp3直接可以,然后在播放flac也可以,用手机客户端播放也可以,在安桥里面浏览播放不行,在播放用emby播放就都不行了,直接播放mp3也不行

播放lafc也是直接播放的,不需要转码

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...