Jump to content

Emby-Next-Gen not regularly synchronizing


j55555

Recommended Posts

j55555

Hello, I recently switched from Emby for Kodi to Emby-Next-Gen with the release of Kodi 19.

As suggested I did a full reinstall of Kodi, and installed Emby-Next-Gen.

initial Sync works fine, however it never seems to sync after that, so new episodes/series, watch statuses, etc do not update.

 

Any ideas? I've searched the forums and haven't seen much along this topic which leads me to believe i'm somehow the only one.

Only other thing of note is that for some reason addon-default as a setting did not function after the reinstall, and it functioned fine previously. Data & Emby server itself are local to this server.

Running Kodi 19 on Manjaro Linux, Using the non-beta Emby-Next-Gen

 

 

Link to comment
Share on other sites

quickmic

First thing to check is the socket-communication. Can you send messages from Emby-Server to the Kodi client?

Link to comment
Share on other sites

j55555

Hey Quickmic, thanks for the response again and sorry for the delay!

I'm definitely too dense to figure that out myself at the moment. any other hints on how to trigger that?

Link to comment
Share on other sites

j55555

I actually found a response from you in a different thread which showed how/where to do this.

I sent a test message and.. it worked?

 

I'm going to install the beta version of the addon and see if that fixes something.

Link to comment
Share on other sites

BaukeZwart
11 minutes ago, j55555 said:

I'm going to install the beta version of the addon and see if that fixes something.

Install the experimental version from the first post of the preview thread . That build has the most recent fixes and for me is synchronising very fast and is more than stable enough for daily use. 

Edited by BaukeZwart
Link to comment
Share on other sites

j55555

I just reinstalled kodi 19 from scratch, then installed the beta emby-next-gen (version 5.2.05)

It then prompted me to login as the only use that is defined in Emby, but clicking it would just bring it back up again.

 

to test I created another user in emby, and clicked manually sign in in emby-next-gen, this let me login with the username and password i had created.

from here a popup stating there was an emby-next-gen error and to check the log.

Log shows this, noteably      self.socket.bind(self.server_address)
                                                   OSError: [Errno 98] Address already in use

 

really not sure why this would be coming up

 

2021-04-07 08:42:07.431 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: Begin connectToServers, with 1 servers
2021-04-07 08:42:07.431 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: testing connection mode 2 with server motherbase
2021-04-07 08:42:07.431 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: tryConnect url: http://192.168.8.89:8096/emby/system/info/public
2021-04-07 08:42:07.436 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: calling onSuccessfulConnection with connection mode 2 with server motherbase
2021-04-07 08:42:07.445 T:980827    INFO <general>: Loading skin file: /home/jeff/.kodi/addons/plugin.video.emby-next-gen/resources/skins/default/1080i/script-emby-connect-users.xml, load type: LOAD_ON_GUI_INIT
2021-04-07 08:42:07.449 T:980827   ERROR <general>: Control 155 in window 13000 has been asked to focus, but it can't
2021-04-07 08:42:08.998 T:980864    INFO <general>: INFO: EMBY.helper.utils.Utils: DeviceId loaded: 9610872c-9bab-483a-b362-93da90dffe8a
2021-04-07 08:42:09.010 T:980827    INFO <general>: Loading skin file: /home/jeff/.kodi/addons/plugin.video.emby-next-gen/resources/skins/default/1080i/script-emby-connect-login-manual.xml, load type: LOAD_ON_GUI_INIT
2021-04-07 08:42:45.278 T:980837    INFO <general>: CActiveAESink::OpenSink - initialize sink
2021-04-07 08:42:45.296 T:980837    INFO <general>: PulseAudio: Opened device alsa_output.pci-0000_01_00.1.hdmi-stereo in pcm mode with Buffersize 150 ms Periodsize 50 ms
2021-04-07 08:42:45.478 T:980827 WARNING <general>: CGUIWindowManager - HandleAction - ignoring action 0, because topmost modal dialog closing animation is running
2021-04-07 08:42:45.561 T:981125   ERROR <general>: Unable to find plugin plugin.program.autocompletion
2021-04-07 08:42:45.561 T:981125   ERROR <general>: GetDirectory - Error getting plugin://plugin.program.autocompletion/?info=autocomplete&&id=jeff&&limit=9
2021-04-07 08:42:53.077 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: Begin connect
2021-04-07 08:42:54.079 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: Found Servers: [{'Address': 'http://192.168.8.89:8096', 'Id': '5689aabed2d84a49b3b355e620d4ff31', 'Name': 'motherbase'}]
2021-04-07 08:42:54.080 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: Begin connectToServers, with 1 servers
2021-04-07 08:42:54.080 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: testing connection mode 2 with server motherbase
2021-04-07 08:42:54.080 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: tryConnect url: http://192.168.8.89:8096/emby/system/info/public
2021-04-07 08:42:54.085 T:980864    INFO <general>: INFO: EMBY.core.connection_manager: calling onSuccessfulConnection with connection mode 2 with server motherbase
2021-04-07 08:42:54.089 T:980864    INFO <general>: INFO: EMBY.emby.main: User is authenticated.
2021-04-07 08:42:54.099 T:981138    INFO <general>: INFO: Emby.core.ws_client: --->[ websocket ]
2021-04-07 08:42:54.108 T:980864    INFO <general>: INFO: EMBY.hooks.monitor.Monitor: --[ post capabilities/5689aabed2d84a49b3b355e620d4ff31 ]
2021-04-07 08:42:54.116 T:980864    INFO <general>: INFO: EMBY.hooks.monitor.Monitor: [ Server Online ]
2021-04-07 08:42:54.121 T:980864   ERROR <general>: EXCEPTION Thrown (PythonToCppException) : -->Python callback/script returned the following error<--
                                                    - NOTE: IGNORING THIS CAN LEAD TO MEMORY LEAKS!
                                                   Error Type: <class 'OSError'>
                                                   Error Contents: [Errno 98] Address already in use
                                                   Traceback (most recent call last):
                                                     File "/home/jeff/.kodi/addons/plugin.video.emby-next-gen/service.py", line 128, in <module>
                                                       if not serviceOBJ.ServerConnect():
                                                     File "/home/jeff/.kodi/addons/plugin.video.emby-next-gen/service.py", line 44, in ServerConnect
                                                       server_id = self.Monitor.EmbyServer_Connect()
                                                     File "/home/jeff/.kodi/addons/plugin.video.emby-next-gen/hooks/monitor.py", line 78, in EmbyServer_Connect
                                                       self.LoadServer({'ServerId': server_id})
                                                     File "/home/jeff/.kodi/addons/plugin.video.emby-next-gen/hooks/monitor.py", line 261, in LoadServer
                                                       if not self.server_instance(data['ServerId']):
                                                     File "/home/jeff/.kodi/addons/plugin.video.emby-next-gen/hooks/monitor.py", line 135, in server_instance
                                                       self.ServerOnline({'ServerId': server_id})
                                                     File "/home/jeff/.kodi/addons/plugin.video.emby-next-gen/hooks/monitor.py", line 756, in ServerOnline
                                                       self.WebserviceUpdateInfo(self.EmbyServer[data['ServerId']])
                                                     File "/home/jeff/.kodi/addons/plugin.video.emby-next-gen/hooks/monitor.py", line 691, in WebserviceUpdateInfo
                                                       self.WebServiceThread = hooks.webservice.WebService(self.WebserviceEventOut, self.WebserviceEventIn, self.ServerIP, self.ServerToken)
                                                     File "/home/jeff/.kodi/addons/plugin.video.emby-next-gen/hooks/webservice.py", line 21, in __init__
                                                       self.server = TCPServer(('127.0.0.1', 57578), RequestHandler)
                                                     File "/usr/lib/python3.9/socketserver.py", line 452, in __init__
                                                       self.server_bind()
                                                     File "/usr/lib/python3.9/http/server.py", line 138, in server_bind
                                                       socketserver.TCPServer.server_bind(self)
                                                     File "/usr/lib/python3.9/socketserver.py", line 466, in server_bind
                                                       self.socket.bind(self.server_address)
                                                   OSError: [Errno 98] Address already in use
                                                   -->End of Python script error report<--
                                                   
2021-04-07 08:42:54.128 T:980864    INFO <general>: CPythonInvoker(2, /home/jeff/.kodi/addons/plugin.video.emby-next-gen/service.py): waiting on thread 140465830360640

 

Link to comment
Share on other sites

j55555

OK i did a few more fresh reinstalls of Kodi & the beta addon, to what I think is some success right now.

 

One thing I did notice, is that it wouldn't actually let me sign in with an account that doesn't have a password. It would keep coming up to the login page.

I added a password to my default account, and it logs in fine. So far so good on the synchronizing, can probably close this one out as a ?? and i'll re-make another thread if this is happening again. I think this is largely chalked up to kodi19 being kind of janky

Link to comment
Share on other sites

  • 4 months later...
On 4/9/2021 at 9:52 PM, j55555 said:

OK i did a few more fresh reinstalls of Kodi & the beta addon, to what I think is some success right now.

 

One thing I did notice, is that it wouldn't actually let me sign in with an account that doesn't have a password. It would keep coming up to the login page.

I added a password to my default account, and it logs in fine. So far so good on the synchronizing, can probably close this one out as a ?? and i'll re-make another thread if this is happening again. I think this is largely chalked up to kodi19 being kind of janky

I got the same problem - did you ever find out the root cause?

Link to comment
Share on other sites

Regrettably not exactly.

After a series of full uninstalls & reinstalls of both kodi & the addon (using beta or normal branch), it started working ok.

It doesn't seem to be due to an update for kodi or the addon, just sheer luck, or me somehow missing removing something before the last time, but since the last post of mine in April everything has been smooth as butter.

 

Best of luck

Link to comment
Share on other sites

quickmic
10 hours ago, somy said:

I got the same problem - did you ever find out the root cause?

Which version are you using?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...