idobidob 0 Posted January 4, 2021 Share Posted January 4, 2021 Hello, I just finished reseting and reinstalling my old HS-210 QNAP NAS (it was lying somewhere dusting for a long time). I upgraded the firmware to the latest 4.3.3.1432 Now, I know this is an old NAS with ARM-V5 CPU. I tried installing latest emby ( `emby-server-qnap-mono_4.6.0.10_arm-x19.qpkg` ) that I downloaded from the site, but emby was not reachable. So I searched a little and installed QMONO `Qmono_5.10.0.160_arm-x19.qpkg` I even tried the `emby-server-qnap-mono_4.5.4.0_arm-x19.qpkg` stable version. but my emby is not reachable. I searched for older versions but of either emby and mono but could not find any. So i'd like to know: Is this a lost battle that I am fighting and should I give up on the dream of a decent media server on my NAS? If not, maybe my versions are wrong? Thanks Idob Link to comment Share on other sites More sharing options...
alucryd 216 Posted January 5, 2021 Share Posted January 5, 2021 (edited) Could you SSH into the NAS and post the output of the following commands? uname -a ls -la /lib/ld-* cat /proc/cpuinfo Thanks! Edited January 5, 2021 by alucryd Link to comment Share on other sites More sharing options...
idobidob 0 Posted January 6, 2021 Author Share Posted January 6, 2021 23 hours ago, alucryd said: Could you SSH into the NAS and post the output of the following commands? uname -a ls -la /lib/ld-* cat /proc/cpuinfo Thanks! Thanks Here are the values returned: [~] # uname -a Linux $$NAS-NAME$$ 3.4.6 #1 Tue Oct 6 12:36:41 CST 2020 armv5tel unknown [~] # [~] # [~] # [~] # ls -la /lib/ld-* -rwxr-xr-x 1 admin administ 122716 Dec 4 2008 /lib/ld-2.5.so* lrwxrwxrwx 1 admin administ 9 Oct 6 08:44 /lib/ld-linux.so.2 -> ld-2.5.so* lrwxrwxrwx 1 admin administ 9 Oct 6 08:44 /lib/ld-linux.so.3 -> ld-2.5.so* [~] # [~] # [~] # [~] # [~] # cat /proc/cpuinfo Processor name : Feroceon 88F6282 rev 1 (v5l) @ 1.6 GHz BogoMIPS : 1587.60 Features : swp half thumb fastmult edsp CPU implementer : 0x56 CPU architecture: 5TE CPU variant : 0x2 CPU part : 0x131 CPU revision : 1 Hardware : Feroceon-KW ARM Revision : 0000 Serial : 0000000000000000 [~] # Link to comment Share on other sites More sharing options...
alucryd 216 Posted January 6, 2021 Share Posted January 6, 2021 Thank you, these look very similar to a synology model where we got it working recently. Would you be able to expose your NAS via SSH so I can run some tests? Link to comment Share on other sites More sharing options...
idobidob 0 Posted January 7, 2021 Author Share Posted January 7, 2021 16 hours ago, alucryd said: Thank you, these look very similar to a synology model where we got it working recently. Would you be able to expose your NAS via SSH so I can run some tests? Sorry but this is a Home NAS, I have no idea how to expose this. Can I run the tests and post them? Link to comment Share on other sites More sharing options...
alucryd 216 Posted January 8, 2021 Share Posted January 8, 2021 These usually can't be broken down into simple commands, but before we come to that, could you give this a try? https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.10/emby-server-qnap-mono_4.6.0.10_arm-x19.qpkg Link to comment Share on other sites More sharing options...
idobidob 0 Posted January 11, 2021 Author Share Posted January 11, 2021 On 1/8/2021 at 3:06 PM, alucryd said: These usually can't be broken down into simple commands, but before we come to that, could you give this a try? https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.10/emby-server-qnap-mono_4.6.0.10_arm-x19.qpkg Unfortunately, it did not work. Thanks Link to comment Share on other sites More sharing options...
Luke 37060 Posted January 13, 2021 Share Posted January 13, 2021 On 1/11/2021 at 4:28 PM, idobidob said: Unfortunately, it did not work. Thanks Hi, what exactly happened when you tried it? Link to comment Share on other sites More sharing options...
alucryd 216 Posted January 16, 2021 Share Posted January 16, 2021 (edited) Could you try running the following and post the output? /share/CACHEDEV1_DATA/.qpkg/EmbyServer/emby-server.sh start Edited January 16, 2021 by alucryd Link to comment Share on other sites More sharing options...
idobidob 0 Posted January 18, 2021 Author Share Posted January 18, 2021 (edited) On 1/16/2021 at 3:13 PM, alucryd said: Could you try running the following and post the output? /share/CACHEDEV1_DATA/.qpkg/EmbyServer/emby-server.sh start I get this: [~] # /share/CACHEDEV1_DATA/.qpkg/EmbyServer/emby-server.sh start -sh: /share/CACHEDEV1_DATA/.qpkg/EmbyServer/emby-server.sh: No such file or directory this also found nothing - don't know if it should or not: find / -name emby Edited January 18, 2021 by idobidob Link to comment Share on other sites More sharing options...
idobidob 0 Posted January 18, 2021 Author Share Posted January 18, 2021 On 1/13/2021 at 9:16 PM, Luke said: Hi, what exactly happened when you tried it? Nothing unfortunately, same 'This site can’t be reached' page Link to comment Share on other sites More sharing options...
alucryd 216 Posted January 18, 2021 Share Posted January 18, 2021 That file should be there if the package is installed, do you have multiple volumes? Please run: find / -type f -name emby-server.sh Link to comment Share on other sites More sharing options...
idobidob 0 Posted January 18, 2021 Author Share Posted January 18, 2021 (edited) 21 minutes ago, alucryd said: That file should be there if the package is installed, do you have multiple volumes? Please run: find / -type f -name emby-server.sh [~] # find / -type f -name emby-server.sh find: /proc/13232/task/13349/fd/57: No such file or directory /share/HDA_DATA/.qpkg/EmbyServer/emby-server.sh [~] # tried invoking with start [~] # /share/HDA_DATA/.qpkg/EmbyServer/emby-server.sh start /share/HDA_DATA/.qpkg/EmbyServer/emby-server.sh: line 18: kill: (15721) - No such process [~] # Segmentation fault Edited January 18, 2021 by idobidob Link to comment Share on other sites More sharing options...
alucryd 216 Posted January 18, 2021 Share Posted January 18, 2021 Oh so this older model does not behave like the current ones, it's possible my install directory discovery is not working properly. What's the output of this command? getcfg EmbyServer Install_Path -f /etc/config/qpkg.conf It should reply with `/share/HDA_DATA/.qpkg/EmbyServer`, if not this is the issue. If it does, I may have another idea, but this one will take some time, so it'll have to wait for the next weekend for me to tackle it. Link to comment Share on other sites More sharing options...
idobidob 0 Posted January 18, 2021 Author Share Posted January 18, 2021 1 hour ago, alucryd said: Oh so this older model does not behave like the current ones, it's possible my install directory discovery is not working properly. What's the output of this command? getcfg EmbyServer Install_Path -f /etc/config/qpkg.conf It should reply with `/share/HDA_DATA/.qpkg/EmbyServer`, if not this is the issue. If it does, I may have another idea, but this one will take some time, so it'll have to wait for the next weekend for me to tackle it. It does so I have hope I'll wait. Thank you very much [~] # getcfg EmbyServer Install_Path -f /etc/config/qpkg.conf /share/HDA_DATA/.qpkg/EmbyServer [~] # Link to comment Share on other sites More sharing options...
alucryd 216 Posted January 25, 2021 Share Posted January 25, 2021 Thanks for being patient, I've got an updated version for you to try: https://github.com/MediaBrowser/Emby.Releases/releases/download/4.6.0.10/emby-server-qnap-mono_4.6.0.10_arm-x19.qpkg The latest changes allowed for a particularly pesky armv7 NAS to work, so I hope the changes will help armv5 models as well. Link to comment Share on other sites More sharing options...
idobidob 0 Posted January 27, 2021 Author Share Posted January 27, 2021 Thank you very much but it is the same . Site cannot be reached Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now