Jump to content

Emby Server update not showing in Synology's package center


Peninha

Recommended Posts

Emby Server 4.5.2.0 update not showing in Synology's package center. In fact it seems I'm missing further older updates.

I'm currently running 4.4.3.0-1, package centre shows no updates available for Synology, any ideas\ suggestions?

image.png.018a5589d9d020fba0511236f2243a12.pngIn image.png.3ee8d05ee080461da861da42454acf18.pngimage.png.8aae9e5ca2cb5f4e042a50c88559b067.png

Link to comment
Share on other sites

FrostByte

That's correct the old repository is no longer being used.  You can remove the old repository if you wish.  

The only way to get updates as of right now is to do a manual install of the spk.  Once you do a manual install the next update message in the Dashboard will change and instead give you a link to where the spk files are located

After Luke gets Emby added to the Synology store then you can use that method also.

 

 

Link to comment
Share on other sites

FrostByte

Part of the reason I believe was that it added a delay in getting releases out because Synology would always do their own thing before uploading it.  So, for beta testers at least this is good because we can get new builds right away. 

For the others the choice would be nice.  The store should be better (easier to set up, etc) than the old repository and really the best solution if wanting to use DSM, but it doesn't seem to be a quick thing

Link to comment
Share on other sites

Was struggling a bit with this , but  after trying to install incompatible versions and doing some research my package version for DS216j - (Armada38x ) seemed to be ARMv7 (all other ARMv7 models), but the download link for that is dead, coming up with 404 message below, only the BETA version seems to be  available at this moment. But then after installing it , emby just stops immediately after running it. And wont connect "This site can’t be reached"

image.png.5a4632f6965691111842871ef4301cda.png

 

 

 

 

Edited by Peninha
Link to comment
Share on other sites

What a nightmare, after setting my libraries back up, now nothing plays "Playback Error.

No compatible streams are currently available. Please try again later or contact your system administrator for details."

Spent hours on this...had enough for today

Edited by Peninha
Link to comment
Share on other sites

Hey Luke, please see attached two examples, i can see "VideoCodecNotSupported"  on the logs but this should not be the case.

This happens on both windows 10 pc and lg smart tv (Webos OS), i was able to play these yesterday before upgrading.

Funnily enough , some videos play on my Android phone.

Cheers

 

ffmpeg-transcode-2ed0f6ae-b958-40aa-a3b2-5edce54d72b9_1.txt ffmpeg-transcode-f3946aa5-3b40-47d6-af91-95e074de4b4c_1.txt

Link to comment
Share on other sites

1 minute ago, Peninha said:

Hey Luke, please see attached two examples, i can see "VideoCodecNotSupported"  on the logs but this should not be the case.

This happens on both windows 10 pc and lg smart tv (Webos OS), i was able to play these yesterday before upgrading.

Funnily enough , some videos play on my Android phone.

Cheers

 

ffmpeg-transcode-2ed0f6ae-b958-40aa-a3b2-5edce54d72b9_1.txt 2.59 kB · 0 downloads ffmpeg-transcode-f3946aa5-3b40-47d6-af91-95e074de4b4c_1.txt 2.64 kB · 0 downloads

Can you please attach the emby server log as well? Thanks.

Link to comment
Share on other sites

I thought these were it, not sure where/ how to get any further logs from...

Honestly,  if I could just revert to V  4.4.3.0-1 i'd be happy (ARMv7 - all other ARMv7 models) If I can get the link for that as a last resort?

Link to comment
Share on other sites

Quote

I thought these were it, not sure where/ how to get any further logs from..

From the emby server dashboard under the Logs section. Thanks.

Link to comment
Share on other sites

Happy2Play
1 minute ago, Peninha said:

Hope this is ts as per the image:

 

Capture.PNG

Luke is asking for the server log also.  embyserver.txt  would be the current log and all previous logs have lost of number after embyserver.  And possibly the hardware detection log also.

Link to comment
Share on other sites

Happy2Play

Dev will have to comment but server log pretty much shows the same.  But suggests a corrupt/broken installation.

2020-10-17 16:51:24.495 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -version' Process exited with code 127
2020-10-17 16:51:24.510 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -version' Output:
	
2020-10-17 16:51:24.517 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -version' Error Output:
	/var/packages/EmbyServer/target/bin/ffmpeg: error while loading shared libraries: libmmal_core.so: cannot open shared object file: No such file or directory
	
2020-10-17 16:51:24.619 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -decoders' Execute: /var/packages/EmbyServer/target/bin/ffmpeg -hide_banner -decoders
2020-10-17 16:51:24.719 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -decoders' Process exited with code 127
2020-10-17 16:51:24.720 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -decoders' Output:
	
2020-10-17 16:51:24.720 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -decoders' Error Output:
	/var/packages/EmbyServer/target/bin/ffmpeg: error while loading shared libraries: libmmal_core.so: cannot open shared object file: No such file or directory
	
2020-10-17 16:51:24.724 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -encoders' Execute: /var/packages/EmbyServer/target/bin/ffmpeg -hide_banner -encoders
2020-10-17 16:51:24.756 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -encoders' Process exited with code 127
2020-10-17 16:51:24.756 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -encoders' Output:
	
2020-10-17 16:51:24.757 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -encoders' Error Output:
	/var/packages/EmbyServer/target/bin/ffmpeg: error while loading shared libraries: libmmal_core.so: cannot open shared object file: No such file or directory
	
2020-10-17 16:51:24.759 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -hwaccels' Execute: /var/packages/EmbyServer/target/bin/ffmpeg -hide_banner -hwaccels
2020-10-17 16:51:24.766 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -hwaccels' Process exited with code 127
2020-10-17 16:51:24.767 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -hwaccels' Output:
	
2020-10-17 16:51:24.767 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -hwaccels' Error Output:
	/var/packages/EmbyServer/target/bin/ffmpeg: error while loading shared libraries: libmmal_core.so: cannot open shared object file: No such file or directory
	
2020-10-17 16:51:24.770 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -protocols' Execute: /var/packages/EmbyServer/target/bin/ffmpeg -hide_banner -protocols
2020-10-17 16:51:24.861 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -protocols' Process exited with code 127
2020-10-17 16:51:24.862 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -protocols' Output:
	
2020-10-17 16:51:24.862 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -protocols' Error Output:
	/var/packages/EmbyServer/target/bin/ffmpeg: error while loading shared libraries: libmmal_core.so: cannot open shared object file: No such file or directory
	
2020-10-17 16:51:24.865 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -filters' Execute: /var/packages/EmbyServer/target/bin/ffmpeg -hide_banner -filters
2020-10-17 16:51:24.879 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -filters' Process exited with code 127
2020-10-17 16:51:24.880 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -filters' Output:
	
2020-10-17 16:51:24.880 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -filters' Error Output:
	/var/packages/EmbyServer/target/bin/ffmpeg: error while loading shared libraries: libmmal_core.so: cannot open shared object file: No such file or directory

 

Link to comment
Share on other sites

Happy2Play

@Luke shouldn't these paths be the same, not mixed?  Just comparing with older logs.

Command line: /volume1/@appstore/EmbyServer/system/EmbyServer.dll -programdata /volume1/Emby -ffdetect /var/packages/EmbyServer/target/bin/ffdetect -ffmpeg /var/packages/EmbyServer/target/bin/ffmpeg -ffprobe /var/packages/EmbyServer/target/bin/ffprobe -nolocalportconfig -ignore_vaapi_enabled_flag -updatepackage emby-server-synology_{version}_armv7_legacy.spk

But looking at other same version logs it appear to be correct.

Edited by Happy2Play
Link to comment
Share on other sites

I've uninstalled and reinstalled 4.5.2.0 legacy and issue persists. Wish I never touched  4.4.3.0-1... I've attached fresh logs... Could i perhaps ask for a link for my previous v for now? ( 4.4.3.0-1 - ARMv7 - all other ARMv7 model)

 

ffmpeg-transcode-9bbeb70a-66c2-41a1-89b1-f18654d1faf5_1.txt embyserver.txt

Edited by Peninha
Link to comment
Share on other sites

Thank you but none of those work for me, Armv7 not supported or incompatible. I'll try to find some other version... now I got nothing installed

Link to comment
Share on other sites

Last try today, installing 4.6.0.2 BETA (as the stable one is not available for download on the link provided at ), the app stops\ won't connect to server (screenshot below.

Tried for the 3rd or 4th time (or 5th) version 4.5.2.0 (_armv7_legacy) , it installs, but again get :"Playback Error.

No compatible streams are currently available. ", although curiously enough,  most seem to work on my Android phone, not windows 10 nor LG tv.

If I could get a working link for older versions such as  V  4.4.3.0-1 (ARMv7 - all other ARMv7 models), I'd stay put with that, as itg was working fine.

 

image.png.97d7ca3a2825e87f98f28e18dd79b0d0.png

Link to comment
Share on other sites

43 minutes ago, Luke said:

For 4.4.3 you'd have to use the old repository method by adding https://synology.emby.media as a package source.

We're looking into the issue with the newer packages. Thanks.

Thank you, reverting to  4.4.3 is allowing me to open some videos now, I think they are still being scanned so I can't open everything just yet. But looks like it's working

Edited by Peninha
Link to comment
Share on other sites

  • 2 months later...
On 17/10/2020 at 16:51, Peninha said:

Thank you, reverting to  4.4.3 is allowing me to open some videos now, I think they are still being scanned so I can't open everything just yet. But looks like it's working

I just updated from 4.4.3 to 4.5.4 and I am now getting the same issue after no problems at all before. Not sure I want to uninstall just to reinstall the older version. 

Can I simply revert to the older version?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...