thegrunge 29 Posted June 6, 2020 Share Posted June 6, 2020 Hello I would like advice for a video card which would be used for transcoding in emby. Knowing that I do video encoding, it would only be used for emby and the computer processor for video encoding. Thanks! 1 Link to comment Share on other sites More sharing options...
Luke 37019 Posted June 7, 2020 Share Posted June 7, 2020 @@Sammy would you recommend your GPU? 1 Link to comment Share on other sites More sharing options...
lightsout 144 Posted June 7, 2020 Share Posted June 7, 2020 It doesn't take much. Have you seen this chart? Nvidia GPU transcoding comparison data. https://r.tapatalk.com/shareLink/topic?share_fid=77624&share_tid=75466&url=https://emby.media/community/index.php?/topic/75466-Nvidia-GPU-transcoding-comparison-data%2E&share_type=t&link_source=app I use a lowly 1050ti, I have tested quite a few streams. It's plenty for my home use. I use it because I wanted to take the load off of my CPU. Many other people use the 1060 6gb which I also used for a while. If you get a newer Nvidia GPU on the Turing architecture it has an upgraded nvenc chip. I personally didn't see much of a difference for encoding between my 1060 and 2060. Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 7, 2020 Author Share Posted June 7, 2020 (edited) @lightsout Currently I have an integrated video card which would be an intel HD 2000 1 GB which is not supported for hardware acceleration. I would like an affordable card allowing me to be able to do 3 or 4 transcodes at the same time. I don't need more. what do you think about GeForce GT 710 2 Go GDDR5 HDMI VGA DVI ? Thanks Edited June 7, 2020 by thegrunge Link to comment Share on other sites More sharing options...
lightsout 144 Posted June 7, 2020 Share Posted June 7, 2020 @lightsout Currently I have an integrated video card which would be an intel HD 2000 1 GB which is not supported for hardware acceleration. I would like an affordable card allowing me to be able to do 3 or 4 transcodes at the same time. I don't need more. what do you think about GeForce GT 710 2 Go GDDR5 HDMI VGA DVI ? Thanks Did you look at the link above? It needs to be viewed on a desktop but it goes all the way back to Kepler. I personally would probably look for a 10xx card. Something else may work but the encoder in the 10xx series was upgraded. Link to comment Share on other sites More sharing options...
Happy2Play 8249 Posted June 7, 2020 Share Posted June 7, 2020 Have a look at this chart. The "GeForce GT 710" is listed but would be limited. https://developer.nvidia.com/video-encode-decode-gpu-support-matrix Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 7, 2020 Author Share Posted June 7, 2020 Hi! What do you think would be a good compromise. I threw a eye at this table, I found the 710 passable. Generally people do not cut so say that at worst I would have 5 transcode at a time and I have no h265 it is not compatible enough with readers. Thanks https://www.elpamsoft.com/?p=Plex-Hardware-Transcoding Link to comment Share on other sites More sharing options...
lightsout 144 Posted June 8, 2020 Share Posted June 8, 2020 Hi! What do you think would be a good compromise. I threw a eye at this table, I found the 710 passable. Generally people do not cut so say that at worst I would have 5 transcode at a time and I have no h265 it is not compatible enough with readers. Thanks https://www.elpamsoft.com/?p=Plex-Hardware-Transcoding How much are you looking to spend? Starting with a gpu like the 710 that is sooo underpowered, unless you are super budget restricted. Doesn't seem like a great idea. Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 8, 2020 Author Share Posted June 8, 2020 Currently what I have as a computer is a Dell optiplex 990 with an i7-2600 3.40Ghz. I would say that I did not invest in a new and powerful machine by supposing that the majority of the users could read in direct reading therefore say that in this precise case it is really to release the processor has end of using it when I want Link to comment Share on other sites More sharing options...
Sammy 735 Posted June 8, 2020 Share Posted June 8, 2020 @@Sammy would you recommend your GPU? I have a GTX 1060 6Gb with the number of transcode streams unlocked. It works great and I have not just Emby Transcoding, I have MCEBuddy running 4 simultaneous HandBrake Conversions and run a BlueIris Security Cam PVR on this PC. I currently have folding at home running to help solve the CoViD 19 virus which is pretty intensive at times. I turn it off if causing issues for playback. Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 8, 2020 Author Share Posted June 8, 2020 (edited) @@Sammy Wow! Thanks for the feedback that's what a need what brand did you buy? Edited June 8, 2020 by thegrunge Link to comment Share on other sites More sharing options...
lightsout 144 Posted June 8, 2020 Share Posted June 8, 2020 Brand shouldn't really matter much. EVGA, MSI, Asus, gigabyte should all suit you well. Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 8, 2020 Author Share Posted June 8, 2020 I just saw that this card for the PCI Express 3.0 my motherboard has a 2.0 (16x) I have to drop a grade according to me Link to comment Share on other sites More sharing options...
arrbee99 1551 Posted June 8, 2020 Share Posted June 8, 2020 If you're looking at a GTX 1060 might also be worth looking at a 1660 Super. More modern, faster for generally the same price, far as I can tell (unless you're going second hand). Have not tried that transcoding stream unlocking thing though. Also, no idea where that PCI 2.0 thing you mentioned might come into it. Just a thought from a very unknowledgeable person. Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 8, 2020 Author Share Posted June 8, 2020 (edited) I read it: How to know if a graphics card is compatible: Find the PCI Express slot On many PCs, there will be a few expansion slots on the motherboard. Typically they will all be PCI Express, but for a graphics card you need a PCI Express x16 slot. There are three versions of this slot, but they’re backwards compatible, so a modern PCI Express 3.0 graphics card will work in a motherboard with a PCI Express x16 2.0 slot Edited June 8, 2020 by thegrunge Link to comment Share on other sites More sharing options...
lightsout 144 Posted June 8, 2020 Share Posted June 8, 2020 X2 or X3 won't matter at all. OP I'm assuming when we're talking about older cards you will buy second hand. Don't go buy a 1060 new you'll get ripped off. Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 9, 2020 Author Share Posted June 9, 2020 yes actually there are only second hand for this model 235$ Canadian dollar Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 9, 2020 Author Share Posted June 9, 2020 Thanks for the advice I chose for 100 $ Canadian more than the 1060 the 1660 super 1 Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 9, 2020 Author Share Posted June 9, 2020 @Sammy Do you send the load of encodings on the video card. If yes, how did you proceed with Handbrake? Link to comment Share on other sites More sharing options...
Sammy 735 Posted June 9, 2020 Share Posted June 9, 2020 (edited) @Sammy Do you send the load of encodings on the video card. If yes, how did you proceed with Handbrake?Not sure what you mean but mainly I use MCEBuddy to strip commercials from recordings and re-encode to HEVC. MCEBuddy uses GPU encoding with HandBreak to do the re-encoding and I do up to four simultaneous re-encodes. Sent from my SM-G960U1 using Tapatalk Edited June 9, 2020 by Sammy Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 9, 2020 Author Share Posted June 9, 2020 @@Sammy as I understand hanbrake will automatically use the video card gpu. I have no option selected? Link to comment Share on other sites More sharing options...
lightsout 144 Posted June 9, 2020 Share Posted June 9, 2020 @@Sammy as I understand hanbrake will automatically use the video card gpu. I have no option selected? He is talking about using handbrake with mcebuddy. Are you talking about using handbrake as a stand alone? You need to go into the settings and turn on hardware encoding. You then need to select the correct profile for your GPU, with Nvidia it should be "H264 Nvenc" or "H265 Nvenc" Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 9, 2020 Author Share Posted June 9, 2020 Ok I don't know mcebuddy. But in handbrake I think I know where to go. I'll see tomorrow when I get the card if I can activate this option Link to comment Share on other sites More sharing options...
lightsout 144 Posted June 10, 2020 Share Posted June 10, 2020 Yeah you should have more options there. Also remember to update handbrake. Link to comment Share on other sites More sharing options...
thegrunge 29 Posted June 10, 2020 Author Share Posted June 10, 2020 (edited) @SammyOk i installed the last version and now i have the option to used the gpu. The encoding time for the same film between the use of the processor and the gpu of the video card increased from 2:30 hours to 38 minutes! Thank you! Edited June 12, 2020 by thegrunge 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now