mengoshmink 16 Posted May 24, 2020 Author Share Posted May 24, 2020 (edited) The emby installation entirely, with reinstall. Is there any particular reason you use docker? The emby installation does nothing to your system except installing its files in /var/lib/emby, and create a systemd file for start/stop/restart. You should easily be able to install without the need for docker, or any other kind of containment. If you're using a remote NAS, be sure that it's on a good tier, any interrupts on the network, or the network being too slow, will result in the kind of errors you are having now. Edit: I would not run NFS over WAN. I would recommend you to use a secure connectioon, and mount the remote NAS drive as a local remote with E.G sshfs. Yes, I have deleted my install and tried again a few times. I use the official Emby Docker image because I believed it would make several things easier. I have tried without and had apparently the same problem. The NAS is physically next to the server. They are on the same GB LAN in my home. FYI, if I am not using Emby and it is just idling the server stays up. I just logged into the server and it was running. I was curious if it had scraped all the metadata. I noticed one was wrong so I did a manual identify, which worked correctly. I scrolled through my list of movies, most were missing. When I scrolled back to the top, the server fell over. Edited May 24, 2020 by mengoshmink Link to comment Share on other sites More sharing options...
Q-Droid 634 Posted May 24, 2020 Share Posted May 24, 2020 Is Emby the only app on your server using the NFS mounts, at least consistently? It's the most obvious common element to me since you've tried other OS and Emby installations. The NFS shares and hardware. You could run a stress test and memory test on your server. Mprime and MemTest86 come to mind. Not sure if these are current but also worth a shot: https://linux-nfs.org/wiki/index.php/Testing_tools Link to comment Share on other sites More sharing options...
mengoshmink 16 Posted May 24, 2020 Author Share Posted May 24, 2020 Is Emby the only app on your server using the NFS mounts, at least consistently? It's the most obvious common element to me since you've tried other OS and Emby installations. The NFS shares and hardware. You could run a stress test and memory test on your server. Mprime and MemTest86 come to mind. Not sure if these are current but also worth a shot: https://linux-nfs.org/wiki/index.php/Testing_tools I use NFS mounts from my desktop machine to browse and playback media while I can not through Emby. I have thought it could be the NFS exports but tried several configurations. When I have a permission problem it is normally more obvious. I have considered running a memory test like MemTest86 but consider the crashes too predictable for it to be a hardware fault. Also it would be a pain in the to remove the server and attach a monitor to run MemTest86. However these are becoming more likely options. Link to comment Share on other sites More sharing options...
Cthalpa 10 Posted May 24, 2020 Share Posted May 24, 2020 Give it a shot without docker! Link to comment Share on other sites More sharing options...
mengoshmink 16 Posted May 24, 2020 Author Share Posted May 24, 2020 Give it a shot without docker! Sure, tried before but will try again :-) Link to comment Share on other sites More sharing options...
Cthalpa 10 Posted May 24, 2020 Share Posted May 24, 2020 Sure, tried before but will try again :-) From what I can see, it the only intermediant that can cause issues, besides a poor NAS Link to comment Share on other sites More sharing options...
mengoshmink 16 Posted May 24, 2020 Author Share Posted May 24, 2020 (edited) From what I can see, it the only intermediant that can cause issues, besides a poor NAS The NAS is a Synology DS918+ No guarantees it's not that but it's not a poor NAS :-) Edited May 24, 2020 by mengoshmink Link to comment Share on other sites More sharing options...
mengoshmink 16 Posted May 24, 2020 Author Share Posted May 24, 2020 Give it a shot without docker! Tried, similar results. top - 19:07:35 up 47 min, 1 user, load average: 0.65, 0.66, 0.49 Tasks: 128 total, 1 running, 127 sleeping, 0 stopped, 0 zombie %Cpu(s): 17.0 us, 2.7 sy, 0.0 ni, 68.4 id, 10.7 wa, 0.0 hi, 1.2 si, 0.0 st MiB Mem : 5692.4 total, 118.8 free, 412.1 used, 5161.6 buff/cache MiB Swap: 10240.0 total, 10239.7 free, 0.2 used. 5014.0 avail Mem PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3701 emby 20 0 3611844 213636 60720 S 29.6 3.7 4:27.30 EmbySer+ 8178 emby 20 0 72420 18892 15476 D 1.3 0.3 0:00.04 ffprobe embyserver-63725943381.txt Link to comment Share on other sites More sharing options...
Luke 37009 Posted May 26, 2020 Share Posted May 26, 2020 Is there any problem with chrome? Link to comment Share on other sites More sharing options...
mengoshmink 16 Posted May 26, 2020 Author Share Posted May 26, 2020 Is there any problem with chrome? Sorry, I didn't try today. I will try and install Chrome tomorrow and test. Link to comment Share on other sites More sharing options...
Luke 37009 Posted May 27, 2020 Share Posted May 27, 2020 Great, thanks ! Link to comment Share on other sites More sharing options...
mengoshmink 16 Posted May 27, 2020 Author Share Posted May 27, 2020 Thank you for your patience. Turn on server SSh into server $ sudo systemctl stop emby-server.service $ sudo dpkg -P emby-server $ docker rmi emby/embyserver:latest $ docker ps -a # Check I don't have any old Emby containers $ cd ~/docker/ # ~/docker is actually a symlink to another location $ rm -rf emby/ # Where my configuration files are for Emby $ ls -lh /mnt/guardian/video/ # Check video share is mounted total 0 dr-xr-xr-x 1 997 users 10 May 13 10:40 Archive dr-xr-xr-x 1 997 users 198 Jan 5 20:33 Video $ nano docker-compose.yml version: '3.7' services: ### emby: volumes: - /mnt/store/var/docker/emby:/config:rw - /mnt/guardian/video:/mnt/guardian/video:ro - /mnt/guardian/tmp:/mnt/guardian/tmp:ro ### - /mnt/guardian/video/test:/mnt/guardian/video/test:rw ### - /mnt/guardian/video/Archive/Video/.video/Movies/Boxsets/Aliens:/mnt/guardian/video/Archive/Video/.video/Movies/Boxsets/Aliens:rw ## devices: ## - /dev/dri:/dev/dri ### To mount all render nodes for VAAPI/NVDEC/NVENC ## network_mode: "host" network_mode: "host" # ports: # - '8096:8096/tcp' restart: unless-stopped environment: - UID=1000 - GID=100 ## - GIDLIST=100,120,1000 ### GIDLIST = users, docker, mengoshmink # - TZ=Europe/London container_name: emby image: emby/embyserver:latest $ docker-compose up -d http://phantom:8096/web/index.html #From LAN English (UK) Username, password Next English and UK Allow remote connections, disable automatic port mapping Accept TOS Finish docker stop emby docker start emby http://phantom:8096/web/index.html #From LAN with chromium-browser (installed for the first time today) on Fedora 32 Login > Settings > Library New > Movies /mnt/guardian/video/Archive/Video/Movies /mnt/guardian/video/Archive/Video/Rockumentary /mnt/guardian/video/Archive/Video/Stand-Up /mnt/guardian/video/Video/Movies /mnt/guardian/video/Video/Rockumentary /mnt/guardian/video/Video/Stand-Up /mnt/guardian/video/Archive/Video/.video/Movies /mnt/guardian/video/Archive/Video/.video/Stand-Up /mnt/guardian/video/Video/.video/Movies /mnt/guardian/video/Video/.video/Rockumentary /mnt/guardian/video/Video/.video/Stand-Up Okay Users > New user # Create everyday account Dashboard to watch library scan progress Scan finished > Logs > Enable debug logging > logout Login as everyday user Click Movies > scroll down list So far seems okay Login to identify some movies Logout Login to turn off debug logging Had to identify more films than normal, and some of the animations are not as fluid but so far so good! I wonder, has Luke solved it? Link to comment Share on other sites More sharing options...
Luke 37009 Posted June 8, 2020 Share Posted June 8, 2020 To be honest I'm not entirely sure what the issue was, but thanks for the feedback. Link to comment Share on other sites More sharing options...
mengoshmink 16 Posted June 9, 2020 Author Share Posted June 9, 2020 Honestly something went wrong soon after but not had a chance to investigate - a lot going on in personal life. I hope to switch my server on again soon and investigate. In the meantime it may miraculously fix itself in a similar way to the problem appeared. I keep thinking it has something it to do with library setup, just a feeling. But if that was the case I'd expect something noticeable in the logs. Thank you all for your help so far, and your patience. Be safe, take care Link to comment Share on other sites More sharing options...
mengoshmink 16 Posted July 28, 2020 Author Share Posted July 28, 2020 Long story short, reset the BIOS and all now seems okay. Thank you all. Be safe, take care. Link to comment Share on other sites More sharing options...
Luke 37009 Posted July 28, 2020 Share Posted July 28, 2020 Thanks for the feedback ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now