Jump to content

google drive y emby


Dzeta

Recommended Posts

Buenas, pues tengo un problema o una duda, o lo mismo no se puede hacer, el problema que tengo es que quiero cargar mi biblioteca de GoogleDrive en Emby a traves de file stream y las carga, pero a su vez me carga las caches en mi disco duro principal con lo cual no tengo capacidad suficiente para ello,¿ no puedo usar mi biblioteca de GoogleDrive en Emby sin usar espacio de mi disco duro principal? tambien he probado con Airexplorer y AirLiveDrive y sucede exactamente lo mismo.

 

Un saludo.

Link to comment
Share on other sites

engancha2

tienes que ir a la configuración de flie stream y cambiar la ruta que utiliza para guardar el cache a otro disco que tengas mas espacio

Link to comment
Share on other sites

engancha2

donde tienes esas 10 teras de peliculas 4k en el drive verdad?

 

pues el cache es cuando vas a reproducir una pelicula de 80 gigas por ejemplo el google file stream se la descarga en la ruta que tiene de cache y luego la borra pero tienes que tener esas 80 gigas libres para que las pueda almacenar mientras tu ves la pelicula.

 

oye yo tengo bastante contenido en google drive si te interesa intercambiar contenido mándame un privado, a mi si me interesa jejeje

Link to comment
Share on other sites

El problema es que a mi me las almacena directamente cuando añado la biblioteca, no hace falta ni que la vea la película y además no me las borra del cache, se queda almacenado ya.

Link to comment
Share on other sites

adrian2095

Tuve las mismas dudas, probé varios (ExpanDrive, AirDrive) y el disco se llevaba hasta ahogarse. Pero al final di con RaiDrive (uso la versión free) y una maravilla. No noto que el disco se llene, de hecho se "autolimpia" solo si llega a usar algo de espacio para la transmisión de algún archivo.

 

Prueba a ver si con esta otra opción te va bien ;)

Link to comment
Share on other sites

engancha2

El problema es que a mi me las almacena directamente cuando añado la biblioteca, no hace falta ni que la vea la película y además no me las borra del cache, se queda almacenado ya.

 

Si le das a tener los archivos sin conexión si se los descarga pero si no no descarga nada hasta que se lo solicita el emby y una vez que el emby ve la película luego se borra automáticamente vamos yo uso Rclone en un servidor dedicado con ubuntu server donde somos 50 usuarios y vemos contenido 4k sin problemas, antes de pasar al servidor dedicado estube haciendo pruebas en mi portatil con windows 10 y google file stream y sin problemas tambien.

Link to comment
Share on other sites

  • 2 months later...
On 4/23/2020 at 1:30 PM, engancha2 said:

donde tienes esas 10 teras de peliculas 4k en el drive verdad?

 

pues el cache es cuando vas a reproducir una pelicula de 80 gigas por ejemplo el google file stream se la descarga en la ruta que tiene de cache y luego la borra pero tienes que tener esas 80 gigas libres para que las pueda almacenar mientras tu ves la pelicula.

 

oye yo tengo bastante contenido en google drive si te interesa intercambiar contenido mándame un privado, a mi si me interesa jejeje

Que programa usas. Para enlazar las pelis de google drive a emby ??  No se te ha bloqueado google drive. ?  Yo probe con file stream. Y recibi mensaje que decia excedi el limite de descarga y debia esperar 24 horas a que se restablesca  ( 2 dias seguido ). El segundo dia solo asisti 1 capitulo y medio de una serie lo cual no es practicamente nada )... Cono le haces para que no te bloqueen..  de momento intento probar con Rclone a ver que pasa. Pero pues me gustaria escuchar su opinion ya que a lo mejor lleva tiempo usando el servicio.  Que es lo que hace que google coloque esa limitante !! Escanear biblioteca por contenido nuevo afecta.... Realmente es un limite de descarga .... Que debo hacer para evitar esto y poder ver peliculas y series sin problema .. (). 

Gracias por leer.  ... Aguardo respuesta 

Link to comment
Share on other sites

romanito
On 7/14/2020 at 1:00 AM, Midaz said:

Que programa usas. Para enlazar las pelis de google drive a emby ??  No se te ha bloqueado google drive. ?  Yo probe con file stream. Y recibi mensaje que decia excedi el limite de descarga y debia esperar 24 horas a que se restablesca  ( 2 dias seguido ). El segundo dia solo asisti 1 capitulo y medio de una serie lo cual no es practicamente nada )... Cono le haces para que no te bloqueen..  de momento intento probar con Rclone a ver que pasa. Pero pues me gustaria escuchar su opinion ya que a lo mejor lleva tiempo usando el servicio.  Que es lo que hace que google coloque esa limitante !! Escanear biblioteca por contenido nuevo afecta.... Realmente es un limite de descarga .... Que debo hacer para evitar esto y poder ver peliculas y series sin problema .. (). 

Gracias por leer.  ... Aguardo respuesta 

A mi me pasa, por que reinicio el servidor (mi pc), cada vez q levantas el servidor, file stream sincroniza lo que cuenta como descarga del archivo, esto pasa con todos los programas de sincronia que te levantan un disco (file stream, rclone, raidrive), bueno esos he probado solamente.

Link to comment
Share on other sites

Understood . But the strange was 1st time i watch about 8 episodes of a tv serie .... Then receive this message ( after this . I just watch 1 episode or less than this and the message appear ). Actually i install rclone on a raspberry pi 4. And im trying to leave it runing to avoid it. ) .... ( I was using the file stream on a laptoo but probably it was the problem . ! Everyday turning on/off)

Link to comment
Share on other sites

romanito
On 7/20/2020 at 11:41 AM, Midaz said:

Understood . But the strange was 1st time i watch about 8 episodes of a tv serie .... Then receive this message ( after this . I just watch 1 episode or less than this and the message appear ). Actually i install rclone on a raspberry pi 4. And im trying to leave it runing to avoid it. ) .... ( I was using the file stream on a laptoo but probably it was the problem . ! Everyday turning on/off)

Podría dejar tu feeback de como te fue con la raspberry? pienso hacer lo mismo mas adelante. Gracias

Link to comment
Share on other sites

 Sure.  

At this moment expirience is good no transcoding ( if transcoding logically it will be very bad) . When using an external device to play movies and series ( at this moment i just try local net ) attached a picture of raspberry pi while (consumption still low ) playing a 1080p movie in an android device 

"I coldn't try Remote connection to emby -external network. Due to my carrier don't let me ( port's closed :( )

Im trying to play movies 1080p in the raspberry pi due to i have one tv without emby client app ( untill now bad experiemce with that . High cpu consumption and temperature go to the space lol ( i dont know why but playing on emby theater "emby client" it's opening many proccesses ) attached a picture of consumption while playing directly on raspberry pi using emby theater  

Playing on web emby will be high consumption as per i read. it perform transcoding allways it doesnt matter if you run  on raspberry pi. Or other device as Laptop, android ..  etc... ( then bad idea ).

Playing on VLC (Raspberry pi ) it run well (1080p) but no emby interface  you need to open folder and found the file you want - attached picture of consumption while playing directly on raspberry pi by VLC 

If you try to add VLC as external player. It doesn't work - after you press play on something pup up VLC player and give you notification errors about codec ( i dont now how emby theater send the info to VLC due to i made test directly on VLC outside emby theater and it run well ) 

About google notification : exceed download limit wait 24 hour to restart it bla bla bla or any block ...... Untill now i couldn't test it better. (I didnt play alot due im not at home - just perform some tests to see how it run - i didn't watch entire movies or series episodes ) But i hope not to be a problem due to raspberry pi will be always on - no reboots 

Well i hope you receive it well . And whatever improve i'll be sharing. ;)

If you speak spanish and want a better info just let me now. 

Emby client other device ( android).jpg

Screenshot_2020-07-20-21-10-37-045_com.realvnc.viewer.android.jpg

Using VLC (Raspberry Pi).jpg

Link to comment
Share on other sites

  • 2 months later...
carlossti
On 4/23/2020 at 3:30 PM, engancha2 said:

donde tienes esas 10 teras de peliculas 4k en el drive verdad?

 

pues el cache es cuando vas a reproducir una pelicula de 80 gigas por ejemplo el google file stream se la descarga en la ruta que tiene de cache y luego la borra pero tienes que tener esas 80 gigas libres para que las pueda almacenar mientras tu ves la pelicula.

 

oye yo tengo bastante contenido en google drive si te interesa intercambiar contenido mándame un privado, a mi si me interesa jejeje

Hola yo tambien tengo contenido pa compartir!

 

Link to comment
Share on other sites

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...