Jump to content

Wireless HDMI?


jasonmcroy

Recommended Posts

jasonmcroy

Does anyone have experience using wireless HDMI? How reliable is it?

 

I just bought a Home theater projector and have spent most of the night testing it out. I currently have an HDMI cable running across the floor from my theater receiver to the projector and using a temporary white sheet to test it all out. Totally crappy setup at the moment. However, despite that, I think it looks great to have a 100" screen in the living room right now. The picture is really awesome!

 

My next steps are to decide how I am going to set it all up either permanently or easily able to pull it out when we have movie night. We otherwise will watch on the TV in our entertainment center. My future screen will be able to hang from the top of the entertainment center when being used. 

 

So, that brought me to the running of the HDMI cable. We rent so I don't want to do a lot of drilling if it isn't necessary. My landlord won't really mind, I just know I will have to fix any holes later. 

 

In my research I came across wireless HDMI receiver/transmitter and wanted to see if anyone here has any experience with them. 

Link to comment
Share on other sites

vdatanet

Does anyone have experience using wireless HDMI? How reliable is it?

 

I just bought a Home theater projector and have spent most of the night testing it out. I currently have an HDMI cable running across the floor from my theater receiver to the projector and using a temporary white sheet to test it all out. Totally crappy setup at the moment. However, despite that, I think it looks great to have a 100" screen in the living room right now. The picture is really awesome!

 

My next steps are to decide how I am going to set it all up either permanently or easily able to pull it out when we have movie night. We otherwise will watch on the TV in our entertainment center. My future screen will be able to hang from the top of the entertainment center when being used. 

 

So, that brought me to the running of the HDMI cable. We rent so I don't want to do a lot of drilling if it isn't necessary. My landlord won't really mind, I just know I will have to fix any holes later. 

 

In my research I came across wireless HDMI receiver/transmitter and wanted to see if anyone here has any experience with them. 

 

Do you need 4K? A friend of mine uses a wifi hdmi bridge without issues but it only supports 1080p. He was not able to find one compatible with 4K.

  • Like 1
Link to comment
Share on other sites

jasonmcroy

Thanks! No 4K needed, just 1080p. I am not sure I have seen a wifi HDMI bridge. I will look that up as well.

Link to comment
Share on other sites

vdatanet

Thanks! No 4K needed, just 1080p. I am not sure I have seen a wifi HDMI bridge. I will look that up as well.

 

 

Sorry I was meaning wireless not wifi. He bought something like this:

 

https://www.amazon.co.uk/gp/product/B074DVLQK7/ref=ox_sc_act_title_1?smid=A2SETGIF2Z9OGZ&psc=1

Edited by vdatanet
Link to comment
Share on other sites

rbjtech

Any thoughts do it the other way around - Hook a HDMI FireTV/Android 'Stick' into the projector and then just stream the audio to the AV Receiver - assuming your projector has Audio out?  Much less bandwidth involved than video, so probably easier and cheaper this way ? 

Link to comment
Share on other sites

@@jasonmcroy

No experience with wireless-HDMI, but for my 1080p projector setup, I have chosen for an optical HDMI cable (cable run was about 15m or approx 49ft).

This optical HDMI cable is thin and flexible for easy routing, with specs like:  4K@60Hz, 4:4:4, HDR, Rec. 2020, 18Gbps, ARC, CEC.

 

I bought this cable with my future 4K projector upgrade in mind, instead of going wireless.

More info here in dutch (so use your own favorite translate site), but those type of optical HDMI cables are probably also available in the US.

Edited by Senna
  • Like 1
Link to comment
Share on other sites

jasonmcroy

Any thoughts do it the other way around - Hook a HDMI FireTV/Android 'Stick' into the projector and then just stream the audio to the AV Receiver - assuming your projector has Audio out?  Much less bandwidth involved than video, so probably easier and cheaper this way ? 

 

Not a bad idea, the only issue is that this projector doesn't have audio out. 

 

 

@@jasonmcroy

No experience with wireless-HDMI, but for my 1080p projector setup, I have chosen for an optical HDMI cable (cable run was about 15m or approx 49ft).

This optical HDMI cable is thin and flexible for easy routing, with specs like:  4K@60Hz, 4:4:4, HDR, Rec. 2020, 18Gbps, ARC, CEC.

 

I bought this cable with my future 4K projector upgrade in mind, instead of going wireless.

More info here in dutch (so use your own favorite translate site), but those type of optical HDMI cables are probably also available in the US.

 

Thanks! I am going to check that out. I did feel my last option is to run a long cable. I have an easy way to hide it along the floor next to a sliding glass door to the right of our Living Room (we have black out curtains installed that completely block all light as needed) because there is a large gap under the carpet edge that I already have speaker wires running to my back surround speakers. Easy space to hide wiring. 

 

I will check out this thin cable to see what we have over here. I would need to do close to a 50 foot run that way. You're not seeing any degradation or noticeable lag at that distance? This may be my best option. 

Link to comment
Share on other sites

jasonmcroy

So, to update this thread:

 

I did go to Best Buy today to pick up a wireless HDMI setup. It actually works OK for regular viewing on non fast moving video. However, trying to watch an action movie with a lot of motion there is just too much lag and the signal can't seem to keep up for a smooth flow. This is with the receiver and transmitter about 10 feet from each other in direct line of sight. I decided to at least try it because I can always return it, which is what I will be doing.

 

If anyone else has any input about running a long HDMI cable or other ideas I am willing to hear them. 

 

Thanks for the responses here!

Link to comment
Share on other sites

You're not seeing any degradation or noticeable lag at that distance?

No, they are certified to still operate at 4K@60Hz, 4:4:4, HDR, Rec. 2020, 18Gbps, ARC, CEC, when a cable length of 30m (approx. 98ft) is used.

Try that with a NON-optical HDMI cable, I think they don't exist for that cable length, for those specs.

  • Like 1
Link to comment
Share on other sites

ive used solstice in work. that streams 4k/25fps. you just need to install an app on the PC. 

 

also looked at screenbeam which again does 4k but uses windows+k. only used it for youtube videos.

 

both not cheap at around £800-£1000 a piece

Edited by Swynol
  • Like 1
Link to comment
Share on other sites

jasonmcroy

ive used solstice in work. that streams 4k/25fps. you just need to install an app on the PC. 

 

also looked at screenbeam which again does 4k but uses windows+k. only used it for youtube videos.

 

both not cheap at around £800-£1000 a piece

 

Yeah, a general issue with a lot of these wireless HDMI setups is they are pretty expensive. I tried one more time today with the one I purchased a couple of days ago and placed them in different spots but I still get the same "choppiness" when I try to watch a Movie via Emby. Watching a TV show seems fine for some reason and streaming from Amazon Prime seems fine as well, although I haven't tried an action movie on that one yet. 

 

I would prefer to just stick with a cable, even though it's a bit more of a challenge to hide it. 

 

I will probably take more time this weekend to play around a bit more with the options.

Link to comment
Share on other sites

rbjtech

Not a bad idea, the only issue is that this projector doesn't have audio out. 

 

 

 

HDMI Audio Breakout box ?  Significantly cheaper than the HDMI extender ! 

 

https://www.amazon.co.uk/Converter-Extractor-Optical-Toslink-Support/dp/B073TXX3KV/ref=pd_lpo_sbs_107_t_0?_encoding=UTF8&psc=1&refRID=N6TCWXVYZJ0Q4V12GX9Z

 

Assuming DTS/AC3 5.1 is good enough, then you could easily run that via a thin fibre to your AV Amp - saving the need to transmit anything over the air...

Edited by rbjtech
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...