EODCrafter 179 Posted August 2, 2019 Share Posted August 2, 2019 (edited) @Luke Source: https://github.com/xteve-project/xTeVe Configuration: https://github.com/xteve-project/xTeVe-Documentation/blob/master/en/configuration.md Releases: https://github.com/xteve-project/xTeVe/releases Migration from 1.4.4: 1. You make a backup of 1.4.4 (Settings -> Backup) 2. Exit xTeVe 1.4.4 3. Start xTeVe 2.0.0 4. Go through the wizard 5. Restore the configuration of 1.4.4 (Setting -> Restore -> Select backup file) Edited August 5, 2019 by EODCrafter Link to comment Share on other sites More sharing options...
Luke 37052 Posted August 2, 2019 Share Posted August 2, 2019 Cool, thanks for the info. 1 Link to comment Share on other sites More sharing options...
BillOatman 500 Posted August 4, 2019 Share Posted August 4, 2019 "Goes open source" maybe a better title. GoLang looks like a great fit for this kind of application. Link to comment Share on other sites More sharing options...
Spaceboy 2493 Posted August 5, 2019 Share Posted August 5, 2019 Yeah I was confused by the title too. I don’t really see much in v2 that isn’t in v1 either. Everything is good for me so I think I’ll just leave it as is Link to comment Share on other sites More sharing options...
BillOatman 500 Posted August 5, 2019 Share Posted August 5, 2019 V2 adds buffering plus some UI improvements mainly. I didn't run V2 when it was beta either because V1 worked just fine for me. The bonus is now it can handle m3u8 files and send them to Emby as a "normal" stream by using that buffering to deal with the m3u8 chunking of the stream. Double bonus is now open source 1 Link to comment Share on other sites More sharing options...
Spaceboy 2493 Posted August 5, 2019 Share Posted August 5, 2019 V2 adds buffering plus some UI improvements mainly. I didn't run V2 when it was beta either because V1 worked just fine for me. The bonus is now it can handle m3u8 files and send them to Emby as a "normal" stream by using that buffering to deal with the m3u8 chunking of the stream. Double bonus is now open source sounds good but nothing there for me. I shall stick with what has worked Link to comment Share on other sites More sharing options...
EODCrafter 179 Posted August 5, 2019 Author Share Posted August 5, 2019 # Version: 2.0.0 released ## New function 1. xTeVe internal - Generate the XEPG files faster - xTeVe updates are now coming from GitHub - Open Source 2. Buffer - HLS / M3U8 support - Support HLS with adaptive bandwidth. - Buffer support for xteve.m3u - Re-streaming. Different clients can stream the same channel at the same time (Plex / Emby / M3U) 3. Playlist - Separate tuner setting for each playlist 4. Filter - New filters (Group Filter) 5. Mapping - Custom channel logos 6. Settings - Image caching (All images of the XMLTV file can be cached.) ## Bug fixes - Lots Link to comment Share on other sites More sharing options...
CBers 6770 Posted August 5, 2019 Share Posted August 5, 2019 And what is the migration process ? Is there a link somewhere. Link to comment Share on other sites More sharing options...
marmei 37 Posted August 5, 2019 Share Posted August 5, 2019 And what is the migration process ? Is there a link somewhere. https://github.com/xteve-project/xTeVe/releases Link to comment Share on other sites More sharing options...
CBers 6770 Posted August 5, 2019 Share Posted August 5, 2019 https://github.com/xteve-project/xTeVe/releases Read that, but there is no "How to Migrate" mentioned. Is it automatic, or do you need to manually move the files used in the v1.x version into to the new v2 folder ? For me, xTeVe is currently running in C:\Users\CBers\xteve - do I just rename it to .xteve, or does it do it itself on 1st run ? I'm sure others will have the same question, so it would be nice to get it sorted 1 Link to comment Share on other sites More sharing options...
marmei 37 Posted August 5, 2019 Share Posted August 5, 2019 The name of the configuration folder has changed, you do not have to rename anything. Both versions will have their own folder. What you do with the old folders is up to you. 1. You make a backup of 1.4.4 (Settings -> Backup) 2. Exit xTeVe 1.4.4 3. Start xTeVe 2.0.0 4. Go through the wizard 5. Restore the configuration of 1.4.4 (Setting -> Restore -> Select backup file) 2 Link to comment Share on other sites More sharing options...
CBers 6770 Posted August 5, 2019 Share Posted August 5, 2019 The name of the configuration folder has changed, you do not have to rename anything. Both versions will have their own folder. What you do with the old folders is up to you. 1. You make a backup of 1.4.4 (Settings -> Backup) 2. Exit xTeVe 1.4.4 3. Start xTeVe 2.0.0 4. Go through the wizard 5. Restore the configuration of 1.4.4 (Setting -> Restore -> Select backup file) OK, that seems to work thanks. Perhaps on initial run, there should be a setting to ask "Do you want to restore from v1.4.x". Still no "Run as a Windows service" option, so will have to run it via NSSM for the time being. Thanks @@marmei. Link to comment Share on other sites More sharing options...
EODCrafter 179 Posted August 5, 2019 Author Share Posted August 5, 2019 (edited) And what is the migration process ? Is there a link somewhere. 1st Post. I thought the Directions were clear? @@marmei, Did we add that to Github? Edited 1st Post to include all Info for those not wanting to go to Discord. Edited August 5, 2019 by EODCrafter Link to comment Share on other sites More sharing options...
CBers 6770 Posted August 5, 2019 Share Posted August 5, 2019 1st Post. I thought the Directions were clear? Obviously not Link to comment Share on other sites More sharing options...
EODCrafter 179 Posted August 5, 2019 Author Share Posted August 5, 2019 Obviously not I edited for those not willing to go to Discord...My Bad. 1 Link to comment Share on other sites More sharing options...
Senna 368 Posted August 5, 2019 Share Posted August 5, 2019 4. Go through the wizard 5. Restore the configuration of 1.4.4 (Setting -> Restore -> Select backup file) I see there is no DIRECT restore possible without inputting a m3u/xml path first, in Wizard process before step 5, right ? Can restore made possible as first step in wizard ? @@marmei Why is xTeVe 2.0.0 (Win-x64) defaulting to my Hyper-V Virtual Ethernet Adapters in command window, regarding showing of all xTeVe IP's ? 1.4.4 doesn't show that behavior. 1 Link to comment Share on other sites More sharing options...
marmei 37 Posted August 5, 2019 Share Posted August 5, 2019 1st Post. I thought the Directions were clear? @@marmei, Did we add that to Github? I updated it on GitHub 2 Link to comment Share on other sites More sharing options...
marmei 37 Posted August 5, 2019 Share Posted August 5, 2019 @@marmei Why is xTeVe 2.0.0 (Win-x64) defaulting to my Hyper-V Virtual Ethernet Adapters in command window, regarding showing of all xTeVe IP's ? 1.4.4 doesn't show that behavior. A button in Wizard is too costly for me to restore once. All IP addresses, what exactly do you mean? 1 Link to comment Share on other sites More sharing options...
Senna 368 Posted August 5, 2019 Share Posted August 5, 2019 (edited) A button in Wizard is too costly for me to restore once. Understandable, so this was one time only going from 1.4.4 to 2.0.0.0 ? So you are saying that near future updates don't need the restore process anymore. All IP addresses, what exactly do you mean? xTeVe DVR and webinterface IP's are defaulting to IP range of my Hyper-V Virtual Ethernet Adapters, when Windows Sandbox is running or has been run on a Win10 Pro system (1903 build 18362.267). This is only with xTeVe 2.0.0 and not with xTeVe 1.4.4. Edit: To add to that, I don't run or startup xTeVe from Windows Sandbox, but directly on system ! Edited August 5, 2019 by Senna Link to comment Share on other sites More sharing options...
marmei 37 Posted August 5, 2019 Share Posted August 5, 2019 Understandable, so this was one time only going from 1.4.4 to 2.0.0.0 ? So you are saying that near future updates don't need the restore process anymore. xTeVe DVR and webinterface IP's are defaulting to IP range of my Hyper-V Virtual Ethernet Adapters, when Windows Sandbox is running or has been run on a Win10 Pro system (1903 build 18362.267). This is only with xTeVe 2.0.0 and not with xTeVe 1.4.4. Edit: To add to that, I don't run or startup xTeVe from Windows Sandbox, but directly on system ! ... [xTeVe] System IP Addresses: IPv4: 2 | IPv6: 7 [xTeVe] Hostname: mbp.local ... [xTeVe] DVR IP: 192.168.178.40:34400 [xTeVe] Web Interface: http://192.168.178.40:34400/web/ ... xTeVe can be reached via all IP addresses. xTeVe asks the operating system for all available IP addresses and the first one is displayed. I have 9 IP addresses with me and over all IP addresses xTeVe is reachable. If your DNS is configured correctly, you can also use the hostname. 1 Link to comment Share on other sites More sharing options...
BillOatman 500 Posted August 5, 2019 Share Posted August 5, 2019 A button in Wizard is too costly for me to restore once. Maybe in next major release have a command line option -restore <filename.zip> people can run the first time. 1 Link to comment Share on other sites More sharing options...
marmei 37 Posted August 5, 2019 Share Posted August 5, 2019 Maybe in next major release have a command line option -restore <filename.zip> people can run the first time. Good idea, that's possible 1 Link to comment Share on other sites More sharing options...
stevedawg85 2 Posted October 15, 2019 Share Posted October 15, 2019 If I need Xteve support/troubleshooting w/ Emby, should I post on here or does an official Xteve forums/page exist? Link to comment Share on other sites More sharing options...
Luke 37052 Posted October 15, 2019 Share Posted October 15, 2019 If I need Xteve support/troubleshooting w/ Emby, should I post on here or does an official Xteve forums/page exist? It really depends on which side your issue is on. If you don't know, then you can post in our community and we'll let you know if we think it's an Xteve issue. Please see how to report a problem. Thanks. 1 Link to comment Share on other sites More sharing options...
EODCrafter 179 Posted October 16, 2019 Author Share Posted October 16, 2019 (edited) If I need Xteve support/troubleshooting w/ Emby, should I post on here or does an official Xteve forums/page exist? What ever you feel comfortable with, but you will get immediate support on our Discord Page. I, (FITH on Discord) and Alexpaton are both loyal Emby/xTeVe Fans! https://discord.gg/KD2jy5V Edited October 16, 2019 by EODCrafter Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now