notla49285 46 Posted June 14, 2019 Share Posted June 14, 2019 (edited) I'm having problems trying to forward a port in my router. At the moment I have a port open to forward to my current server, and a domain set up to get to my IP and port, and all is working well. I've just bought a new Synology NAS and want to test running Emby server directly from the NAS, so need to be running two servers in parallel, therefore need to forward another port in my router to the NAS. Easy right? No. I've tried several ports that are never used by anything, up into the 50,000's (creating custom services within Genie), and also some preset ones in the router, but no matter which one I pick, I get an error saying the port is already in use. But it isn't!!! I've done the Googles and the only answer that seems to come back is to switch off UPNP and reboot the router, but UPNP is not enabled!! I've rebooted the server several times anyway and it's made no difference. The only other answer I could find (which made me lol a little) was to reboot the router and try to forward the port within the first 30 seconds of booting up, but this hasn't worked either. Can anybody suggest anything else to try? At the moment there is only one port that is currently forwarded in my router (and it works fine), all others are blocked (which is the default level 1 setting which subsequent settings override), no other ports have been assigned or even referenced anywhere (to my knowledge). It's a Netgear D6300 if that helps. Edited June 14, 2019 by notla49285 Link to comment Share on other sites More sharing options...
Luke 37058 Posted June 14, 2019 Share Posted June 14, 2019 Hi, where do you get this message? Link to comment Share on other sites More sharing options...
Guest asrequested Posted June 14, 2019 Share Posted June 14, 2019 When you installed the new Emby server on the NAS, is automatic port mapping enabled? Link to comment Share on other sites More sharing options...
notla49285 46 Posted June 14, 2019 Author Share Posted June 14, 2019 Hi, where do you get this message? On the router (as attached) Link to comment Share on other sites More sharing options...
notla49285 46 Posted June 14, 2019 Author Share Posted June 14, 2019 (edited) When you installed the new Emby server on the NAS, is automatic port mapping enabled? Emby isn't even installed at the moment and I still can't do it Edited June 14, 2019 by notla49285 Link to comment Share on other sites More sharing options...
notla49285 46 Posted June 14, 2019 Author Share Posted June 14, 2019 So there's a bit of a development to this - it's a false error message. The error is real, I can't add the port forwarding, but it's not because the port is being used by something else, it's because either the NAS is rejecting it or the router won't forward to the NAS IP. I've just done exactly the same thing with the same port but to my existing Emby server and it went through with no problems. So thanks to whichever moronic software developer at Netgear put that message in for every time it fails, that's wasted nearly two days. Still don't have a resolution yet. Link to comment Share on other sites More sharing options...
mastrmind11 717 Posted June 14, 2019 Share Posted June 14, 2019 So there's a bit of a development to this - it's a false error message. The error is real, I can't add the port forwarding, but it's not because the port is being used by something else, it's because either the NAS is rejecting it or the router won't forward to the NAS IP. I've just done exactly the same thing with the same port but to my existing Emby server and it went through with no problems. So thanks to whichever moronic software developer at Netgear put that message in for every time it fails, that's wasted nearly two days. Still don't have a resolution yet. grab yourself a router that doesn't suck, or, put a fw on it that doesn't suck. check out ddwrt for your router or grab a unifi usg. no turning back. Link to comment Share on other sites More sharing options...
Guest asrequested Posted June 14, 2019 Share Posted June 14, 2019 This ^^^ Link to comment Share on other sites More sharing options...
notla49285 46 Posted June 15, 2019 Author Share Posted June 15, 2019 (edited) grab yourself a router that doesn't suck, or, put a fw on it that doesn't suck. check out ddwrt for your router or grab a unifi usg. no turning back. Ok this is a lot of work that I can't do at the moment, I don't have another router and can't take this one down to try and install another firmware. Guess I'll just have to forget the NAS server until I can. I can't help thinking it's an issue with the NAS and not the router (though that error message is still irritating), as I can forward to another PC on the network with the same port with no problems at all. I thought that maybe the NAS was blocking all ports, so I added the port I'm trying to use into Emby's port settings hoping that it would open a TCP listener and allow traffic through, but that hasn't worked either. Edit: DD-WRT is incompatible with my router (Netgear D6300), so I guess I'm screwed. Edited June 15, 2019 by notla49285 Link to comment Share on other sites More sharing options...
notla49285 46 Posted June 15, 2019 Author Share Posted June 15, 2019 It looks like my router may be about to be kicked out, I'm looking at a Synology RT2600ac at the moment, I figure buying from the same manufacturer should make it easier, and I've heard the OS and GUI is very similar to the NAS. Need to save up some more pennies, I've just spent £500 on the NAS and £200 on extra hard drives for it... Link to comment Share on other sites More sharing options...
Guest asrequested Posted June 15, 2019 Share Posted June 15, 2019 Get one of these. https://www.amazon.co.uk/UBIQUITI-Networks-Security-Gateway-Router/dp/B00LV8YZLK/ref=sr_1_1?crid=3QTMHSOS081UT&keywords=unifi+router&qid=1560609135&s=gateway&sprefix=Unifi+r%2Caps%2C308&sr=8-1 https://www.amazon.co.uk/UBIQUITI-NETWORKS-UBI-UAP-AC-PRO-5Ghz-1300Mbps/dp/B016XYQ3WK/ref=pd_bxgy_147_img_3/261-8742917-8894913?_encoding=UTF8&pd_rd_i=B016XYQ3WK&pd_rd_r=677a96c8-8f7a-11e9-90a3-ab43a1aa6bd3&pd_rd_w=8rg3l&pd_rd_wg=zpfte&pf_rd_p=07e3e597-b71b-4701-a3fd-d79c50f48406&pf_rd_r=G80ZG4W41AXT657B30NM&psc=1&refRID=G80ZG4W41AXT657B30NM Link to comment Share on other sites More sharing options...
ProperlyFormattedDataFile 3 Posted June 16, 2019 Share Posted June 16, 2019 It looks like my router may be about to be kicked out, I'm looking at a Synology RT2600ac at the moment, I figure buying from the same manufacturer should make it easier, and I've heard the OS and GUI is very similar to the NAS. Need to save up some more pennies, I've just spent £500 on the NAS and £200 on extra hard drives for it... I use a Synology router with Emby. No issues. They're good routers, solid software and the RT2600ac has excellent range. You can't go wrong with the Ubiquiti gear mentioned downthread either though. Ubiquiti is pretty much the stock recommendation you're going to get on any tech forum because they're rock solid and if you're so inclined you can do nearly anything with it. Synology will be a bit more plug and play, but a bit more limiting. Link to comment Share on other sites More sharing options...
notla49285 46 Posted June 25, 2019 Author Share Posted June 25, 2019 Just as a follow-up, I went with the Synology RT2600ac in the end. Very happy with the router, had a few issues with reverse proxies but it's running now. The RT2600ac has very good reporting tools and (from my dumb user perspective at least) good security once the right packages were set up and installed. It blows the Netgear completely out of the water, shame really but meh. 1 Link to comment Share on other sites More sharing options...
Luke 37058 Posted June 25, 2019 Share Posted June 25, 2019 Thanks for the feedback ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now