Jump to content

Scheduled recordings skipped


astuff

Recommended Posts

Tonight I had 3 shows scheduled to record but nothing happend.  They are still showing under schedule but nothing in recordings.  Using a Mac and HDHomeRun.

 

How do I get help and what do I do to fix this?  There is nothing in the logs at the start times for the 3 shows:  21:00, 21:30, 22:00

 

 

Thanks for some direction.

embyserver-log.txt

Link to comment
Share on other sites

TIme zone looks right (eastern standard) and is set up for automatic based on location.  System was recording fine earlier this week. 

 

I saw there was the 4.0.2 update so installed it.  The did a test recording and it worked without issue.

 

This is on a Mac and I put embyserver in the user login items (user set for automatic login).  Would there be another process that needs started?  The machine was rebooted Wednesday morning.

Link to comment
Share on other sites

  • 6 months later...

I hadn't done much with Emby for a while but recently saw a short preview show and scheduled it to record.  Again, nothing got recorded. It still shows but nothing happened in the log.  Any ideas?

 

BTW - I clicked on it and it showed the recording details but when I went back it wouldn't show them again.  Now the icon isn't even there as if I never requested it to record.  Some sort of clean-up routing triggered when I clicked?

embyserverlog.txt

post-421577-0-10215400-1568163554_thumb.png

Edited by astuff
Link to comment
Share on other sites

kanipek

I am seeing something similar.

 

Series recordings for IPTV can be scheduled, but unless I set "channel's" to "all channels" they do not record. 

 

I am using Schedules Direct XMLTV data for these channels.

 

It used to function normally - Select a series for recording "channels" to "one Channel" 

 

Also "One Channel" used to be the actual channel name, as it is with my OTA/CATV channels so you would see for example "USA Network" - This still occurs when I initially setup a series recording for IPTV, it will give the channels name. And it will actually also show as set to record in the Recording schedule. At some point - I don't know the cause it disappears from the Recording schedule and if I check the series record option it will show as "One Channel"

 

I don't see anything showing up in the logs. Same problem???

 

Just throwing it out there.

Link to comment
Share on other sites

I hadn't done much with Emby for a while but recently saw a short preview show and scheduled it to record.  Again, nothing got recorded. It still shows but nothing happened in the log.  Any ideas?

 

BTW - I clicked on it and it showed the recording details but when I went back it wouldn't show them again.  Now the icon isn't even there as if I never requested it to record.  Some sort of clean-up routing triggered when I clicked?

 

When was it supposed to record?

Link to comment
Share on other sites

When was it supposed to record?

It was supposed to start recording Monday, September 9th at 9:00 PM - see screenshot that I took on September 10th.

Link to comment
Share on other sites

It was supposed to start recording Monday, September 9th at 9:00 PM - see screenshot that I took on September 10th.

 

The log went silent for two hours at the time of the recording. Did the machine sleep or go into some sort of lower power state?

 

At this point we do not have any facilities to schedule a system wake on MacOS, so you'll need to ensure the machine is awake. It's something we can add in a future update though.

Link to comment
Share on other sites

System was up as it runs 24x7 (BOINC in background keeping CPU warm).  Problem was at 9PM so 21:00 - I see a few log messages during the time that it should have been recording starting with this one:

 

2019-09-09 21:24:19.166 Info HttpServer: HTTP GET http://192.168.1.111:8096/dlna/fb8392c531a94721a07dd6fd72efe362/description.xml. UserAgent: UPnP/1.0 DLNADOC/1.50 Platinum/1.0.5.13

 

Separately - is it normal to have a gap in the log of a couple of hours as it did at 9am?  I see lots of gaps in the log at different times.

Link to comment
Share on other sites

I'm pretty sure this is caused by MacOS sleep or suspend. There's a nearly identical topic in the MacOS section from several months back. Let me see if I can find that.

Link to comment
Share on other sites

 

 

Separately - is it normal to have a gap in the log of a couple of hours as it did at 9am?

 

If you're not using the server and it's being paused by the system, then yes I suppose this could happen.

Link to comment
Share on other sites

  • 5 months later...

Things had been stable and working up until yesterday.  Skipped recordings last night - one at 20:00 and one at 21:00.  Restarted computer and Emby said installing something so had to restart again.  Hoping that fixed things. 

 

This time there was info in the log for the recording.  Last thing in logs for each was "Info LiveTV: Getting media sources for recording from channel 462 462" and then nothing.


embyserver-63718092974.txt

embyserver-63718092815.txt

Link to comment
Share on other sites

  • 3 weeks later...
astuff

Happened again tonight.  Recording scheduled for 8pm but nothing happened - still showing as scheduled.  Emby log is empty from 14:45 to 22:56 (when I opened a Emby client to check on things).
 

2020-03-20 13:05:40.969 Info TaskManager: Executing Refresh Emby Connect Data
2020-03-20 13:05:40.969 Info TaskManager: Refresh Emby Connect Data Completed after 0 minute(s) and 0 seconds
2020-03-20 14:45:04.830 Info TaskManager: IntervalTrigger fired for task: Convert media
2020-03-20 14:45:04.830 Info TaskManager: IntervalTrigger fired for task: Send Download Notifications
2020-03-20 14:45:04.830 Info TaskManager: IntervalTrigger fired for task: Transfer media
2020-03-20 22:56:52.477 Info HttpServer: HTTP GET http://192.168.1.111:8096/. UserAgent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:74.0) Gecko/20100101 Firefox/74.0

 

OS X system log shows activity during empty period of Emby log.  There is an error at the same time of last Emby entry.  Could this be related?
 

Mar 20 14:37:22 TV-Room syslogd[135]: ASL Sender Statistics
Mar 20 14:45:03 TV-Room syncdefaultsd[82410]: objc[82410]: Class SYDClient is implemented in both /System/Library/PrivateFrameworks/SyncedDefaults.framework/Versions/A/SyncedDefaults and /System/Library/PrivateFrameworks/SyncedDefaults.framework/Support/syncdefaultsd. One of the two will be used. Which one is undefined.
Mar 20 14:45:03 TV-Room syncdefaultsd[82410]: objc[82410]: Class SYDJournal is implemented in both /System/Library/PrivateFrameworks/SyncedDefaults.framework/Versions/A/SyncedDefaults and /System/Library/PrivateFrameworks/SyncedDefaults.framework/Support/syncdefaultsd. One of the two will be used. Which one is undefined.
Mar 20 14:52:47 TV-Room syslogd[135]: ASL Sender Statistics

Link to comment
Share on other sites

Please attach the complete emby server log. Again though, on MacOS we don't do anything to wake up the system yet, so you need to ensure that it's on at the time of the recording and has the system resources that it needs. Thanks.

Link to comment
Share on other sites

Based on this log it doesn't look like anything was scheduled. Are you sure it was scheduled for that day? How do you know that?

Link to comment
Share on other sites

astuff

Under "Live TV" - "Schedule" there was the graphic for my show with it showing Friday at 8pm (even though it was after 10pm when I looked at it).  It went away after I rebooted.  Since it is a part of a series it is still showing for the next two Fridays.

Link to comment
Share on other sites

  • 2 months later...
astuff

Today MotorWeek was skipped at 14:30 and nothing in the log.  I just upgraded to 4.4.3.0 so maybe it wiped it out?  It was the only thing on my schedule before the upgrade and now I see two episodes scheduled - one for each of the next two Saturdays.

[attachment=70201:MotorWeek.zip]

MotorWeek.zip

Link to comment
Share on other sites

Was it showing in the Schedule tab as something that was going to record?

Link to comment
Share on other sites

astuff

Was it showing in the Schedule tab as something that was going to record?

Yes, at least a couple days before.  I forgot to check after the upgrade.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...