JBDragon 3 Posted February 9, 2019 Share Posted February 9, 2019 I've been running EMBY for a while on my ReadyNAS 516. But I tried installing the newest update from 3.6 something to the 4.0 something and it failed to install. Not only that but now EMBY is gone from showing up on my NAS. I tried going back to the version that was working, but it just all fails to install. In fact, I just finished installing an updated version of PLEX just now with zero issues. I keep getting the error "Cannot install application emby-server" 1 1 Link to comment Share on other sites More sharing options...
Luke 36999 Posted February 9, 2019 Share Posted February 9, 2019 Hi there, how are you trying to install? 1 Link to comment Share on other sites More sharing options...
JBDragon 3 Posted February 9, 2019 Author Share Posted February 9, 2019 (edited) Well I'm trying to install the deb file through the normal readynas Interface. I just tried manually and that has also failed. This is what it's telling me. root@READYNAS:~# sudo dpkg -i emby-server-deb_4.1.0.7_amd64.deb Selecting previously unselected package emby-server. (Reading database ... 31129 files and directories currently installed.) Preparing to unpack emby-server-deb_4.1.0.7_amd64.deb ... Unpacking emby-server (4.1.0.7) ... Setting up emby-server (4.1.0.7) ... usermod: warning: failed to completely remove old home directory /home/embyCreated symlink /etc/systemd/system/mul ti-user.target.wants/emby-server.service → /usr/lib/systemd/system/emby-server.service. Processing triggers for libc-bin (2.19-18+deb8u10.netgear1) ... root@READYNAS:~# Edited February 9, 2019 by JBDragon 1 Link to comment Share on other sites More sharing options...
Luke 36999 Posted February 9, 2019 Share Posted February 9, 2019 Ok that is the linux debian, that is not the netgear specific one. Make sure you are always going to the website for downloads: https://emby.media/download Now comes the trouble - I've seen two other users do this before. One was able to install the correct version and they were fine after that. For the other it was not so easy. I don't recall the specifics, but it's somewhere here in the netgear section of the community. Link to comment Share on other sites More sharing options...
JBDragon 3 Posted February 10, 2019 Author Share Posted February 10, 2019 So I tried once again using the netgear version and this is once again a failed result. root@READYNAS:~# sudo dpkg -i emby-server-netgear* Selecting previously unselected package emby-server. (Reading database ... 31129 files and directories currently installed.) Preparing to unpack emby-server-netgear_4.0.1.0_amd64.deb ... Unpacking emby-server (4.0.1.0) ... Setting up emby-server (4.0.1.0) ... chown: changing ownership of '/home/emby/.ssh/ssh_authorized_keys': Operation not permitted dpkg: error processing package emby-server (--install): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: emby-server root@READYNAS:~# Link to comment Share on other sites More sharing options...
Luke 36999 Posted February 10, 2019 Share Posted February 10, 2019 Why not just try using the netgear app store? Link to comment Share on other sites More sharing options...
JBDragon 3 Posted February 10, 2019 Author Share Posted February 10, 2019 Why not just try using the netgear app store? I've tried that and it's failed! Every option I've tried has failed. That failed. Downloading the file and going into my ReadyNAS and using the upload file feature which is what I normally do has failed. Trying to SSH the file that way has failed. I don't know what's going on at this point. it had been working just fine for quite some time. I try to update to the latest and it failed. Try to go back to the version I was running and that fails. Nothing I try works. I'm almost at the point of trying to just delete anything EMBY and start over again, but I don't know if that'll work. I really don't want to go back to starting all over from scratch once again. Link to comment Share on other sites More sharing options...
Luke 36999 Posted February 10, 2019 Share Posted February 10, 2019 This might be due to installing the non-netgear package. This sounds similar to what happened with the other person who did this. Here it is: https://emby.media/community/index.php?/topic/49765-emby-for-netgear-readynas/?p=600116 Link to comment Share on other sites More sharing options...
JBDragon 3 Posted February 10, 2019 Author Share Posted February 10, 2019 I was trying everything before that Non Netgear Package. So that wasn't it. I did just get it working once again. I use a program called WinSCP which is just easier for me to get around on my NAS, and I pretty much wiped EMBY from existence. Then I went back to the normal way of installing an app once again and this time it worked. Then I tried to update and that worked just fine. BUT I've lost everything and have to start over once again which is annoying. Luckily I'm currently the ONLY one using EMBY right now, everyone else uses PLEX. So back to setting EMBY up once again,..... Link to comment Share on other sites More sharing options...
Luke 36999 Posted February 10, 2019 Share Posted February 10, 2019 Thanks for the feedback. Apologies for the disruption. Link to comment Share on other sites More sharing options...
JBDragon 3 Posted February 11, 2019 Author Share Posted February 11, 2019 At least I can have everything set back up pretty quickly. Especially when there are no other users to deal with. As setup goes, it is pretty simple. I already know how to set it up and what I want and so that is a breeze for me. I have 4.1.0.7 beta running and going to try to install the newer beta version 4.1.0.8. and see what happens. Normally all goes just fine. Thanks. Link to comment Share on other sites More sharing options...
Luke 36999 Posted February 11, 2019 Share Posted February 11, 2019 Thanks for the feedback. Link to comment Share on other sites More sharing options...
dannieboiz 13 Posted March 2, 2019 Share Posted March 2, 2019 Trying to install this on a 4200 running latest version tried both the regular and beta but the rn refuse to install it. Was done by downloading and uploading from frontview Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 2, 2019 Share Posted March 2, 2019 Trying to install this on a 4200 running latest version tried both the regular and beta but the rn refuse to install it. Was done by downloading and uploading from frontview Hi, what is the full model number? thanks. Link to comment Share on other sites More sharing options...
dannieboiz 13 Posted March 2, 2019 Share Posted March 2, 2019 (edited) Hi, what is the full model number? thanks. It's a 4200V2 Edited March 2, 2019 by dannieboiz Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 2, 2019 Share Posted March 2, 2019 I'm trying to find specs for that model, does it have a 64-bit CPU? That's what our package currently supports right now. Link to comment Share on other sites More sharing options...
dannieboiz 13 Posted March 3, 2019 Share Posted March 3, 2019 I have a Xeon X3450. Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 3, 2019 Share Posted March 3, 2019 That's in the Netgear Nas? Link to comment Share on other sites More sharing options...
dannieboiz 13 Posted March 3, 2019 Share Posted March 3, 2019 That's in the Netgear Nas? LOL yes, it's an enterprise NAS. It can technically do dual Xeon https://www.bhphotovideo.com/c/product/819935-REG/Netgear_RN12T1230_100NAS_36TB_12_Bay_ReadyNAS_4200.html Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 3, 2019 Share Posted March 3, 2019 Does Emby Server show up for installation in the Netgear app store? Link to comment Share on other sites More sharing options...
dannieboiz 13 Posted March 3, 2019 Share Posted March 3, 2019 Does Emby Server show up for installation in the Netgear app store? it's no where to be found Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 4, 2019 Share Posted March 4, 2019 Then that would suggest it's not compatible with our current package. I'm assuming this is a 64-bit CPU, I'm just having a hard time confirming that. Link to comment Share on other sites More sharing options...
dannieboiz 13 Posted March 4, 2019 Share Posted March 4, 2019 It is a 64bit CPU. I had a server that use this same cpu/motherboard Link to comment Share on other sites More sharing options...
scalyback 0 Posted March 13, 2019 Share Posted March 13, 2019 Some support to install Emby on the ReadyNAS 214 would be nice. It will not install from the store or via an upload. Wrong architecture error for me Link to comment Share on other sites More sharing options...
r32nj 1 Posted May 7, 2019 Share Posted May 7, 2019 So my EMBY prompted me to install 4.1.1 (I was running 4.0.2) on my ReadyNAS 626X. So the install failed and now I cannot install the previous version 4.0.2 or even the one in the ReadyNAS app store 3.5.2. I don't know what was done in the 4.1.1 app but it seems to have wrecked the whole install on the ReadyNAS. I am not a Linux guy so I don't want to have to mess with shell access. How can I get EMBY working on my ReadyNAS again? Not a happy camper... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now