ctrlaltdefeat 8 Posted August 6, 2018 Share Posted August 6, 2018 I get the following error when transcoding: Unknown encoder 'ac3' How would I go around adding this encoder(and any others that may be missing, that I haven't found out about)? Full log: https://gist.github.com/CtrlAltDefeat94/c19a1f36fe2653ddb11e491ca748f7df Link to comment Share on other sites More sharing options...
ebr 14910 Posted August 6, 2018 Share Posted August 6, 2018 Hi. Are you using our Docker image? If so, please look for an update. Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 6, 2018 Author Share Posted August 6, 2018 That seems to have fixed the issue, thanks! Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 6, 2018 Author Share Posted August 6, 2018 On the latest version I seem to still have issues with matroska @ 0x160a7c0] Subtitle codec 94213 is not supported. https://gist.github.com/CtrlAltDefeat94/b0a0ffe3ccadfdccb14c5f1c330803dd Link to comment Share on other sites More sharing options...
Luke 37060 Posted August 6, 2018 Share Posted August 6, 2018 Have you been able to transcode that file before? Can you try a different file? thanks. Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 6, 2018 Author Share Posted August 6, 2018 I can transcode the video myself just fine(outside of docker) All my movies are released by the same group(and using the same kind of subtitles) and fail to be transcoded within docker Link to comment Share on other sites More sharing options...
Luke 37060 Posted August 6, 2018 Share Posted August 6, 2018 Have you transcoded it before in Emby? Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 6, 2018 Author Share Posted August 6, 2018 No I reinstalled Emby again last night, after not using it for.a long time. This is pretty much the first video I'm trying to transcode since installing by again Link to comment Share on other sites More sharing options...
Luke 37060 Posted August 6, 2018 Share Posted August 6, 2018 Can you provide a sample video for testing? Thanks. Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 6, 2018 Author Share Posted August 6, 2018 With my current upload speed it will take some time to make it available. I should have it ready in roughly 8 hours. Link to comment Share on other sites More sharing options...
Luke 37060 Posted August 6, 2018 Share Posted August 6, 2018 Thanks. You can also slice a small portion of a file. If you do that, just make sure the smaller version exhibits the same problem. Thanks ! Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 7, 2018 Author Share Posted August 7, 2018 Yeah, I considered slicing, but I don't have any software that can do it(nor am I familiar with it), and it would be totally me to accidentally make the file differently resulting in it not being of any use. The video can be downloaded here here(4GB) : https://mega.nz/#!0cwG3ChY!ujHtc_8vPMYUpwYyPO7eueMD9h8F8FP56JulI-HUBNQ Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 8, 2018 Author Share Posted August 8, 2018 Any progress towards this? Were you able to download the file? I'll take the link down if you got it Link to comment Share on other sites More sharing options...
Luke 37060 Posted August 8, 2018 Share Posted August 8, 2018 Sorry, just started downloading, but please leave it up a little longer because i would like have to someone else download it as well for testing. thanks. Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 9, 2018 Author Share Posted August 9, 2018 Al right tomorrow and the day after I'll be traveling, so I probably won't have time to touch anything for the next 3 days anyway Link to comment Share on other sites More sharing options...
Luke 37060 Posted August 9, 2018 Share Posted August 9, 2018 Great, thanks. Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 12, 2018 Author Share Posted August 12, 2018 I'm at my destination, so I can test things now, if need be Link to comment Share on other sites More sharing options...
Luke 37060 Posted August 12, 2018 Share Posted August 12, 2018 Thanks. We're still looking into it. Link to comment Share on other sites More sharing options...
alucryd 216 Posted August 13, 2018 Share Posted August 13, 2018 @ctraltdefeat I just pushed a new docker beta with an additional subtitle codec enabled, I believe this is the one you need. Could you please give it a try? Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 13, 2018 Author Share Posted August 13, 2018 I've updated to latest from the beta channel, but the issue persists: https://gist.github.com/CtrlAltDefeat94/da904b87b822cb8f414e11e8efa9db45 Rather than manually adding additional codecs when things fail, wouldn't it be more feasible to let Emby detect whether things are missing, and then add them if need be? Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 15, 2018 Author Share Posted August 15, 2018 @alucryd, not sure if you get notifications from new replies topics you replied on, so tagging you to be sure Link to comment Share on other sites More sharing options...
Luke 37060 Posted August 15, 2018 Share Posted August 15, 2018 We'll see what @@alucryd thinks. Thanks ! Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted August 18, 2018 Author Share Posted August 18, 2018 (bump) I'm traveling again and will be available for testing again on Monday Link to comment Share on other sites More sharing options...
Luke 37060 Posted August 18, 2018 Share Posted August 18, 2018 We are still looking into it. You will get a response. Thanks. Link to comment Share on other sites More sharing options...
ctrlaltdefeat 8 Posted September 21, 2018 Author Share Posted September 21, 2018 (edited) It's been some time. Has there been any progress on this, or is there any more information required? The file is still available for downloading additional info: This command works:ffmpeg -re -f matroska,webm -i file:"/mnt/media/Anime/Hataraku Saibou/[HorribleSubs] Hataraku Saibou - 10 [720p].mkv" -map 0:0 -map 0:1 -map 0:2 -codec:v:0 libx264 -force_key_frames "expr:gte(t,n_forced*5)" -vf "scale=trunc(min(max(iw\,ih*dar)\,720)/2)*2:trunc(ow/dar/2)*2" -pix_fmt yuv420p -preset superfast -crf 23 -maxrate 1308000 -bufsize 2616000 -x264opts:0 subme=0:me_range=4:rc_lookahead=10:me=dia:no_chroma_me:8x8dct=0:partitions=none -vsync -1 -map_metadata -1 -map_chapters -1 -threads 0 -codec:a:0 copy -codec:s:0 copy -disposition:s:0 default -y "/mnt/media/ProgramData/Emby/Sync/bee8ae9b059240dcb31b652d74303a04/81054295af87448e93ac93953912d081/42c490b6-eec3-4023-91f1-74084449ecfb.mkv" Whereas this command does not ffmpeg -re -f mov,mp4,m4a,3gp,3g2,mj2 -i file:"/mnt/media/Movies/Logan (2017)/Logan.2017.1080p.BluRay.x264.AC3-PxHD.mp4" -map 0:0 -map 0:1 -map 0:2 -codec:v:0 libx264 -force_key_frames "expr:gte(t,n_forced*5)" -vf "scale=trunc(min(max(iw\,ih*dar)\,720)/2)*2:trunc(ow/dar/2)*2" -pix_fmt yuv420p -preset superfast -crf 23 -maxrate 1116000 -bufsize 2232000 -x264opts:0 subme=0:me_range=4:rc_lookahead=10:me=dia:no_chroma_me:8x8dct=0:partitions=none -vsync -1 -map_metadata -1 -map_chapters -1 -threads 0 -codec:a:0 ac3 -ac 2 -ab 384000 -ar 44100 -af "volume=2" -codec:s:0 copy -disposition:s:0 default -y "/mnt/media/ProgramData/Emby/Sync/a863367ff3fd4d428fa355acf4d630a1/bd5dc7b9ddef4c838368feb2fa59bbf2/3435707a-5a0f-4cc5-807b-1f00e12bdbbf.mkv" I'm not sure what parameter throws it off, or what any of them do for that matter Edited September 21, 2018 by ctrlaltdefeat Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now