Sammy 735 Posted March 5, 2018 Share Posted March 5, 2018 Yesterday was not a good day. WMC wouldn't tune a tuner and would either say, "No tuner available" or "Video Driver not compatible with protected content" or some other error.. I reset tuners in HDHR Config, rebuilt the database in epg123 and thought I restored my custom channel numbers in GuideTool. I got WMC to tune but the guide has the "stock" Charter Spectrum channel numbering whic I can tediously fix. I then reloaded my channels in ServerWMC for use in EmbyDVR. In the Emby Server Dashboard under Live TV I just a spinner. I cannot play LiveTV in client apps. Log to come soon. Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
Luke 37007 Posted March 5, 2018 Share Posted March 5, 2018 Please attach all of the information requested in how to report a problem: https://emby.media/community/index.php?/topic/739-how-to-report-a-problem/ Thanks. Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 5, 2018 Author Share Posted March 5, 2018 For whatever reason, Tapatalk wouldn't let me post in ServerWMC. Admin move if you want to.. TIA Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 5, 2018 Author Share Posted March 5, 2018 Please attach all of the information requested in how to report a problem: https://emby.media/community/index.php?/topic/739-how-to-report-a-problem/ Thanks. Yes. Of course. Trying to retrieve the log on my phone now. Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 5, 2018 Author Share Posted March 5, 2018 Here's the log. server-63655840535.txt Link to comment Share on other sites More sharing options...
Luke 37007 Posted March 5, 2018 Share Posted March 5, 2018 Try refreshing the guide in emby server. 1 Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 5, 2018 Author Share Posted March 5, 2018 Try refreshing the guide in emby server. I would but I cannot get anything to show on that page. It is just a spinner so I cannot select "Refresh Guide Data" Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 5, 2018 Author Share Posted March 5, 2018 I went in in a remote session and downloaded the installation package for Emby Server from your website. I had to run the setup elevated as ad.administrator to get the installer to run. Still no LiveTV, just a spinner on that page in the Server Dashboard. Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
Luke 37007 Posted March 5, 2018 Share Posted March 5, 2018 Make sure ServerWMC is up and operational. Link to comment Share on other sites More sharing options...
d00zah 127 Posted March 5, 2018 Share Posted March 5, 2018 I would but I cannot get anything to show on that page. It is just a spinner so I cannot select "Refresh Guide Data" Sammy, I believe Luke's suggestion is to run the scheduled task... 1 Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 5, 2018 Author Share Posted March 5, 2018 It is stuck on 0% Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
Luke 37007 Posted March 5, 2018 Share Posted March 5, 2018 Again, server log, thanks. Link to comment Share on other sites More sharing options...
d00zah 127 Posted March 5, 2018 Share Posted March 5, 2018 It is stuck on 0% Sent from my SM-G930P using Tapatalk patience... mine takes a tad > 1 min. Link to comment Share on other sites More sharing options...
Luke 37007 Posted March 5, 2018 Share Posted March 5, 2018 I'm sure I've asked you this before, but if you have a TV tuner that Emby can support natively without a plugin then you can do away with all of this troubleshooting by just using the built-in features. It's painful for us when we have to troubleshoot connections to external software, and by the sounds of it I'm sure it's been painful for you as well. Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 6, 2018 Author Share Posted March 6, 2018 (edited) I'm sure I've asked you this before, but if you have a TV tuner that Emby can support natively without a plugin then you can do away with all of this troubleshooting by just using the built-in features. It's painful for us when we have to troubleshoot connections to external software, and by the sounds of it I'm sure it's been painful for you as well.This keeps things congruent between WMC and Emby though and has been working well for a very long time. At any rate here's the log and some screen grabs.. Log (2).txt Sent from my SM-G930P using Tapatalk http://cloud.tapatalk.com/s/5a9ddf7b16ed4/Log%20%282%29.txthttp://cloud.tapatalk.com/s/5a9ddfc3991d0/Log%20%281%29.txt Edited March 6, 2018 by Sammy Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 6, 2018 Author Share Posted March 6, 2018 @@krustyreturns Sent from my SM-G930P using Tapatalk Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 6, 2018 Author Share Posted March 6, 2018 (edited) Make sure ServerWMC is up and operational.Just saw this. Yes it was one of the first things I checked. I even loaded the WMC Channels again. Sent from my SM-G930P using Tapatalk Edited March 6, 2018 by Sammy Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 6, 2018 Share Posted March 6, 2018 Please restart swmc and then post its log after a failed attempt to play something. When its there, tag me again in this thread. 1 Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 6, 2018 Author Share Posted March 6, 2018 I have good news. LiveTV in Emby Server has now loaded tuners and the guide from ServerWMC. I think Chrome on my HTPC is borked somehow but when I did it from a different login on the same HTPC it worked real fast whereas on the HTPC login Chrome is running slow for all webpages. This is my issue I believe. At any rate, what is the typical channel load time? On my shield it takes about 1 to 2 seconds for the guide to load and then another 4 to 6 seconds for a channel to begin playing. Is this expected? Can it be sped up somehow? My HTPC is a Devil's Canyon i5 4690k with 12Gb RAM and a Samsung SSD 850 Pro boot drive on which Emby Server runs. Thanks. Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 6, 2018 Share Posted March 6, 2018 The guide display time is more of an emby thing, but I think you can reduce it by limiting the number of channels you send on to emby. Fyi, you can configure serverwmc so it only send a subset of channels to on to emby, I set mine to send only the channels I normally watch which is about 7 out of like 600. The channel play time is just the nature of the beast. If your tuner supports it, you can experiment with having serverwmc use DLNA mode for emby (but I don't recall it being much faster). There is also emby's native mode (I have no idea how fast that is). Link to comment Share on other sites More sharing options...
Luke 37007 Posted March 6, 2018 Share Posted March 6, 2018 On my shield it takes about 1 to 2 seconds for the guide to load and then another 4 to 6 seconds for a channel to begin playing. Is this expected? Can it be sped up somehow? How to report a media playback issue. Thanks. 1 Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 6, 2018 Author Share Posted March 6, 2018 I have two Silicon Dust HDHR Prime Tuners, first Generation. Once I get some more kinks worked out it is highly likely that we will have an antenna on the roof or in the attic with their new Connect Quad Tuners. I'm experimenting with YoutubeTV and Sling right now to fill in some of the CaTV gaps.. I also just scored a Amazon FireTV for $35 (Pay the first month of subscription with DirectTV Now and they send a "free" FireTV) so I'll be checking out what DirectTV Now has to offer. At any rate, these tuners are DLNA but I don't think they transcode. Also, I had a lot of channels disabled using GuideTool and I'm working to fix that at this time too. What page is this on in ServerWMC? That may be the quickest. Does it respect changes in WMC if one reloads the channels? I like to re-number my channels to better suit us. Thanks! Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 6, 2018 Author Share Posted March 6, 2018 (edited) How to report a media playback issue. Thanks. No screenshots as it does play, just a spinner for a bit waiting for it to load. I believe that the ShieldTV direct plays whereas Roku requires transcoding (The Roku would by last night about 7:30 if it even shows up in this log). I tuned on ET on the same HTPC as the Emby Server and on the ShieldTV at about 5:30 this morning (all times PST but I think the log is in local time zone and not GMT). Here it is.. Not uploading. I'll try again in a bit. Edited March 6, 2018 by Sammy Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 6, 2018 Share Posted March 6, 2018 I have two Silicon Dust HDHR Prime Tuners, first Generation. Once I get some more kinks worked out it is highly likely that we will have an antenna on the roof or in the attic with their new Connect Quad Tuners. I'm experimenting with YoutubeTV and Sling right now to fill in some of the CaTV gaps.. I also just scored a Amazon FireTV for $35 (Pay the first month of subscription with DirectTV Now and they send a "free" FireTV) so I'll be checking out what DirectTV Now has to offer. At any rate, these tuners are DLNA but I don't think they transcode. Also, I had a lot of channels disabled using GuideTool and I'm working to fix that at this time too. What page is this on in ServerWMC? That may be the quickest. Does it respect changes in WMC if one reloads the channels? I like to re-number my channels to better suit us. Thanks! Yes, serverwmc respects user channel renumbering, but it does require you to restart serverwmc to see the changes. You also may need to wait a while before the changes bubble through the emby database, but it will happen eventually . If you want to restrict the channels that you send to emby, unfortunately it doesn't show up on serverwmc's gui (too lazy), instead you have to edit its config file. In wmc create a channel group (in wmc its called 'favorites') of the channels you want to send to emby, just as an example name the group EmbyFav. Then in serverwmc's settings file, look for the section called ClientRestrictions and edit it as follows: <ClientRestrictions> <ClientRestriction> <Client>Emby^</Client> <RestrictChannels>RestrictToGroups</RestrictChannels> <RestrictRecordings/> <Groups>EmbyFav</Groups> </ClientRestriction> </ClientRestrictions> 1 Link to comment Share on other sites More sharing options...
Sammy 735 Posted March 6, 2018 Author Share Posted March 6, 2018 Here's the Emby Server Log: https://drive.google.com/file/d/1fYi_F8iNvtSTYB25GqiscCDcSg33oS-F/view?usp=sharing Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now