Luke 36999 Posted February 21, 2018 Share Posted February 21, 2018 Download qpkg: Please see our download page: https://emby.media/download What is This? This is a Thecus package that will be developed by the Emby team and after a brief testing period will be made available for download on our website. This is completely separate from the Thecus package that is available from Thecus, and thus will be a new installation. Advantages over Current Package Built with .NET Core, which is smaller and faster than the mono runtime, with major performance improvements. Everything is self contained, no more mono or worrying about any other dependencies ! No more fumbling with the ffmpeg setup ! VAAPI hardware transcoding support included and tested by us ! Builds will always be immediately available after new Emby Server releases ! Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 8, 2018 Author Share Posted March 8, 2018 Just a heads up, I've removed the link from the first post and going forward you can find this package from the download page of our website: https://emby.media/download It's under the NAS section, then select Thecus. Thanks guys. Link to comment Share on other sites More sharing options...
throgmorton 96 Posted March 15, 2018 Share Posted March 15, 2018 Can't seem to get the package installed and its claiming it needs a firmware of 3.00.00 or greater. However the latest firmware released last year for most of the LinuxNAS's is only at 2.06.02.10. Ive tried both 3.3.1.0 and 3.3.1.5 (beta). Sample log from ThecusNAS below. Tried on Thecus N7770-10G which is running I believe ThecusOS 5. App Name: [ Emby Server ] App Version: [ 3.3.1.5 ] 2018/03/15 16:22:53: App is installing ... 2018/03/15 16:22:53: Install/Upgrade App failed becase NAS versions do not match (firmware version needs to be above 3.00.00). 2018/03/15 16:22:53: App installation failed. Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 15, 2018 Author Share Posted March 15, 2018 What is your architecture? Link to comment Share on other sites More sharing options...
throgmorton 96 Posted March 15, 2018 Share Posted March 15, 2018 What is your architecture? Its a 64-bit machine. Is there something specific you are looking for? Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 16, 2018 Author Share Posted March 16, 2018 I was just making sure. I will create a ticket in our internal tracker. Our Thecus build developer has low availability this week so you might not get an answer until next week. Link to comment Share on other sites More sharing options...
throgmorton 96 Posted March 16, 2018 Share Posted March 16, 2018 I was just making sure. I will create a ticket in our internal tracker. Our Thecus build developer has low availability this week so you might not get an answer until next week. No problem, there wasn't isn't much rush I was just eager to try it out as you said there are some major performance increases, which was one of the hold backs for me to switch over to being on the Thecus server. Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 17, 2018 Author Share Posted March 17, 2018 Yea I think what we'll do next week is just lower the requirement in a test build and have you try it out. Thanks. Link to comment Share on other sites More sharing options...
throgmorton 96 Posted March 19, 2018 Share Posted March 19, 2018 Yea I think what we'll do next week is just lower the requirement in a test build and have you try it out. Thanks. Sounds good let me know when you have it ready and i'll give it a spin. Link to comment Share on other sites More sharing options...
Luke 36999 Posted March 29, 2018 Author Share Posted March 29, 2018 @@throgmorton Please try the beta from our website: https://emby.media/download Let us know how it goes. Thanks ! Link to comment Share on other sites More sharing options...
dude14 3 Posted May 16, 2018 Share Posted May 16, 2018 Hello, I am using Emby for a while now and it is working well. So thank you for that. I am still using version 3.2.70 because the newer updates won't install. I get the error: Firmware mode (N7700) does not match. I am running Emby on a Thecus N4200eco. This is an x86 machine running on OS5. Is there a solution ? Link to comment Share on other sites More sharing options...
Luke 36999 Posted May 16, 2018 Author Share Posted May 16, 2018 Have you tried with our latest release? Thanks. Link to comment Share on other sites More sharing options...
dude14 3 Posted May 16, 2018 Share Posted May 16, 2018 Latest one I tried is 'emby-server-thecus_3.4.1.4_x86_64'. Link to comment Share on other sites More sharing options...
Luke 36999 Posted May 16, 2018 Author Share Posted May 16, 2018 Are you able to update your firmware? Link to comment Share on other sites More sharing options...
dude14 3 Posted May 16, 2018 Share Posted May 16, 2018 I am afraid not. It's running on 5.03.02 which is the latest firmware for the machine. 1 Link to comment Share on other sites More sharing options...
Depechie 6 Posted May 19, 2018 Share Posted May 19, 2018 Running a Thecus N5550 here. Package https://github.com/MediaBrowser/Emby.Releases/releases/download/3.4.1.0/emby-server-thecus_3.4.1.0_x86_64.mod always fails to even upload. Package https://github.com/MediaBrowser/Emby.Releases/releases/download/3.4.1.6/emby-server-thecus_3.4.1.6_x86_64.mod does upload but after 10 minutes the NAS is still saying "Installing application..." that mostly indicates at not being able to install it. The version of Outkast ( 3.2.70.0 ) installs in less than a minute. 1 Link to comment Share on other sites More sharing options...
bebaldin 1 Posted May 27, 2018 Share Posted May 27, 2018 Running a Thecus N5550 here. Package https://github.com/MediaBrowser/Emby.Releases/releases/download/3.4.1.0/emby-server-thecus_3.4.1.0_x86_64.mod always fails to even upload. Package https://github.com/MediaBrowser/Emby.Releases/releases/download/3.4.1.6/emby-server-thecus_3.4.1.6_x86_64.mod does upload but after 10 minutes the NAS is still saying "Installing application..." that mostly indicates at not being able to install it. The version of Outkast ( 3.2.70.0 ) installs in less than a minute. Same here. Running a N5500 and I get the same problems. 3.2.70.0 still runs well but I have to manually stop and start it occasionally thanks to the removal of the auto-restart plug-in. Emby gets very sluggish after a few days if I do not. Link to comment Share on other sites More sharing options...
throgmorton 96 Posted June 27, 2018 Share Posted June 27, 2018 (edited) Tried the latest 3.4.1.19, and even though it installs fine, it just won't start properly. Even trying to remove the program it will basically hang. N7770-10G Firm: 2.06.02.10 I was going to try on my N7700+ although from the above post it doesn't look like 5.03.02 works either. I'm wondering if there is some other dependency that I would need installed. Edited June 27, 2018 by throgmorton Link to comment Share on other sites More sharing options...
Luke 36999 Posted June 27, 2018 Author Share Posted June 27, 2018 I'm not sure at this point yet. We have not yet personally tested an older to thecus based on the older firmware. In a perfect world we'd like to. We're going as fast as we can to support as many devices as possible. Thanks. Link to comment Share on other sites More sharing options...
Depechie 6 Posted August 15, 2018 Share Posted August 15, 2018 Tried this again with the latest mod ( 3.5.2.0 ) on my Thecus N5550. So current status, the server software WORKS! Great news and is a lot faster than the older pre .Net Core versions. But, the Thecus OS still does not like the current mod version very much... after installation of the mod, you need to 'start' the module in the thecus manual application installation area. This gives no feedback after trying for a while... a good working mod will tell you that it has been started. Trying to start it again results in nothing. But this does actually trigger the software to run! So even though you get no feedback in the thecus admin area, the mod is actually running and working. Secondly if you reboot the NAS, you need to trigger the start manually again, because after reboot thecus OS will tell you the emby server mod restarting is not working. So overall, it works, but it needs to be trigger manually to start ( even after NAS reboot ) and you won't see visual confirmation in the thecus admin panel. Link to comment Share on other sites More sharing options...
Luke 36999 Posted August 15, 2018 Author Share Posted August 15, 2018 Thanks for the feedback! We'll have to look and see what we might be able to do there. Link to comment Share on other sites More sharing options...
throgmorton 96 Posted August 17, 2018 Share Posted August 17, 2018 (edited) Tried this again with the latest mod ( 3.5.2.0 ) on my Thecus N5550. Just out of curiosity your N5550 is it running firmware V2.06.02.10 like my N7770-10G is? I did have the same sort of experience as you describe, where I had to manually start the server as it would not properly auto launch. The problem I was experiencing was that on a reboot of the NAS it would actually stall during the bootup, to the point where I had to hookup a monitor to the NAS to see what was going on. As mentioned above the last time I tried was using version 3.4.1.19 so maybe there has been some improvement in 3.5.2 so it doesn't hang on the reboot of the NAS. Also is there was any additional apps you installed which I may have missed that are required. Edited August 17, 2018 by throgmorton Link to comment Share on other sites More sharing options...
meszimark 0 Posted October 23, 2018 Share Posted October 23, 2018 Hello, I tried to install the newer package, but I got this error. Is there a way to do it right? THECUS N7700 V5.03.02.8 Module will install/upgrade ,please do not reload or close admin UI Module Name: [ Emby Server ] Module Version: [ 3.5.2.0 ] 2018/10/23 13:55:29: Module is installing ... 2018/10/23 13:55:29: Firmware mode (N7700) does not match. 2018/10/23 13:55:29: Install module fail. Link to comment Share on other sites More sharing options...
Luke 36999 Posted October 23, 2018 Author Share Posted October 23, 2018 What architecture is that model? Link to comment Share on other sites More sharing options...
meszimark 0 Posted October 23, 2018 Share Posted October 23, 2018 x86 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now