Latchmor 584 Posted March 13, 2014 Share Posted March 13, 2014 (edited) Hi Krusty, I don't look at the Live TV section that much so not sure how long this has been there but noticed tonight that 1 channel had no guide data. I found this in the MBS log 2014-03-13 22:30:21.6861 Error - DtoUtils: ServiceBase2014-03-13 22:30:31.2861 Error - ServerWMC: GetProgramsAsync> Input string was not in a correct format. 2014-03-13 22:30:31.2861 Error - App: Error getting programs for channel Channel 4 I should know better than to post only part of a log but thought I'd check if the above shows any clues... The guide in WMC for this channel is fine by the way. Cheers Edited March 14, 2014 by Latchmor Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 14, 2014 Share Posted March 14, 2014 Please post the swmc log. But to make it more manageable, it would be great if you could restart swmc and then start mbs. Once mbs gets done reading in the guide data then post the log. Link to comment Share on other sites More sharing options...
Spaceboy 2493 Posted March 14, 2014 Share Posted March 14, 2014 Dunno if this helps but channel 4 is working for me. If this is the UK channel 4 Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
Latchmor 584 Posted March 14, 2014 Author Share Posted March 14, 2014 Hi, Logs attached Krusty. It's actually 3 Channels. Channel 4 HD, Channel 4 and Channel 4+1. Strange! Cheers Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 14, 2014 Share Posted March 14, 2014 Hi, Logs attached Krusty. It's actually 3 Channels. Channel 4 HD, Channel 4 and Channel 4+1. Strange! Cheers Sorry, apparently the logging of this error is lacking. What are the names of these channels, for instance Channel 4? Link to comment Share on other sites More sharing options...
Latchmor 584 Posted March 14, 2014 Author Share Posted March 14, 2014 (edited) Hi Krusty, they are the actual names. Is the word 'Channel' confusing something? Channel 4 HD Channel 4 Channel 4+1 Cheers Edit: Mmm, I also have Channel 5+1 and it works ok. Edited March 14, 2014 by Latchmor Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 14, 2014 Share Posted March 14, 2014 (edited) Those are some un-original channel names. I can't tell from this log then, I need more info. Go to: %programdata%\vdsoftware\serverwmc\config.xml When you can, change LogReplyMessages to true then save the config file. Then do the restart swmc-mbs thing again and send just this serverwmc log after the guide is loaded (warning, it will be much bigger this time). Edited March 14, 2014 by krustyreturns Link to comment Share on other sites More sharing options...
Latchmor 584 Posted March 14, 2014 Author Share Posted March 14, 2014 Yeah I Know! New logs attached, Cheers. MBS: https://drive.google.com/file/d/0BySCIuCBl669bVo3RUpZajJUeTg/edit?usp=sharing ServerWMC: https://drive.google.com/file/d/0BySCIuCBl669emU1TDg0cF9Ic2M/edit?usp=sharing Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 14, 2014 Share Posted March 14, 2014 Thanks for sending the monster log (remember to turn this setting back to false). I think I found the problem and its easy to fix, unfortunately it will require a new rev of serverwmc. If I create pre-release can you test? Link to comment Share on other sites More sharing options...
Latchmor 584 Posted March 14, 2014 Author Share Posted March 14, 2014 Yeah no problem Krusty. Probably tomorrow morning if that's ok? Cheers Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 15, 2014 Share Posted March 15, 2014 I PM'd you the link. Test whenever is convenient, no rush. Link to comment Share on other sites More sharing options...
Latchmor 584 Posted March 15, 2014 Author Share Posted March 15, 2014 Hi Krusty, that did the trick! All 3 channels showing guide data and nothing else has been affected. No errors in logs either. Thanks very much Latchmor Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 15, 2014 Share Posted March 15, 2014 Good, thanks for the follow-up. This fix will be in the next release. Link to comment Share on other sites More sharing options...
Latchmor 584 Posted March 16, 2014 Author Share Posted March 16, 2014 (edited) Hey Krusty, just so you know. The dashboard does not appear to be picking up that I'm using a channel in WMC. I'm watching one just now but this is the status below. I think this is just since using your test version for my problems above. Cheers EDIT: Out of curiosity I pressed Record and the status of Tuner D changed to show Recording. Stop recording and just watch and it goes back to above pic. Edited March 16, 2014 by Latchmor Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 16, 2014 Share Posted March 16, 2014 Hi. I just checked and it does for me (figures, right?). I started a live stream in wmc and in the browser I saw the client as: playback\recorderbroker&ehshell.exe&7860 which is correct for wmc streams. Is swmc running on a different machine then mediabrowser? Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 16, 2014 Share Posted March 16, 2014 Also, try this. Edit config.xml with a text editor (%programdata%\vdsoftware\serverwmc\config.xml). Toward the end of the file, temporarily set the field Debug_ListTunerClients to true. Save the config file and restart swmc. Then re-try your experiment above. If it fails please give me the swmc log. thanks. Link to comment Share on other sites More sharing options...
Latchmor 584 Posted March 16, 2014 Author Share Posted March 16, 2014 (edited) Hi I was just trying another test when your new reply appeared. MBS and SWMC is on the same PC, always has been. I don't have Debug_ListTunerClients in the xml... Thanks Edit: Do you mean add it? Edited March 16, 2014 by Latchmor Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 16, 2014 Share Posted March 16, 2014 oops - I must be getting my pre-releases mixed up. Go to the same place you got the last pre-release and get the newest one (1132). After you run it once, you will have that field. Sorry about that. Link to comment Share on other sites More sharing options...
Latchmor 584 Posted March 16, 2014 Author Share Posted March 16, 2014 Hi, ok tested with 1132 and the xml change and it now shows this when watching It shows the normal status when recording as I tried that too. Cheers 1 Link to comment Share on other sites More sharing options...
krustyreturns 191 Posted March 16, 2014 Share Posted March 16, 2014 I deem that as progress. Thanks for the log, I think I see what I need to do to get it the rest of the way before release. Link to comment Share on other sites More sharing options...
Latchmor 584 Posted March 16, 2014 Author Share Posted March 16, 2014 Cool, glad to help. Cheers Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now