chef 3745 Posted September 18, 2021 Share Posted September 18, 2021 (edited) 40 minutes ago, CBers said: Whatever way you do it will be wrong. Probably a new tab. Oh, tell me how you really feel The new one we have is going to be the best yet, I. All seriousness. There are so many improvements. The memory usage, the chapters, and the UI have all gotten better. Edited September 18, 2021 by chef 1 Link to comment Share on other sites More sharing options...
neik 835 Posted September 18, 2021 Share Posted September 18, 2021 36 minutes ago, CBers said: Probably a new tab. +1 Link to comment Share on other sites More sharing options...
Cheesegeezer 3086 Posted September 18, 2021 Share Posted September 18, 2021 We are Hoping to have a major update for you all tomorrow. i will list out the changes and update the instructions before release. it is still advisable to test this new release on small test system with a few TV shows that have a good amount of content. About 300-500 episodes. hopefully this release with just be house cleaning the niggley bugs out. a huge point to note, and we have tested this now, if your audio varies between episodes in a season, tge plugin will have difficulty in detection. There is nothing we can do about it and we tried changing the sensitivity of the detection and it proves weird results. anyways catch yas all on the flip side 3 Link to comment Share on other sites More sharing options...
crusher11 849 Posted September 18, 2021 Share Posted September 18, 2021 Audio varies in what way? Link to comment Share on other sites More sharing options...
Cheesegeezer 3086 Posted September 18, 2021 Share Posted September 18, 2021 (edited) 24 minutes ago, crusher11 said: Audio varies in what way? Loudness, pitch are the main ones that don’t sound like they are different, but analysis shows they are. Basically it boils down to consistent audio quality in seasons. Edited September 18, 2021 by Cheesegeezer 1 1 Link to comment Share on other sites More sharing options...
TBMike 7 Posted September 19, 2021 Share Posted September 19, 2021 So I got a test server setup with 9 shows and 302 episodes. running the detection task gave the following results: Series Processed Average CPU Time Taken 2 24% 5min 4 50% 4min 16 secs 6 44% 4min 11 secs 8 30% 4min 23 secs I've just started checking the chapters, but so far so good. 3 Link to comment Share on other sites More sharing options...
rbjtech 4218 Posted September 19, 2021 Share Posted September 19, 2021 25 minutes ago, TBMike said: So I got a test server setup with 9 shows and 302 episodes. running the detection task gave the following results: Series Processed Average CPU Time Taken 2 24% 5min 4 50% 4min 16 secs 6 44% 4min 11 secs 8 30% 4min 23 secs I've just started checking the chapters, but so far so good. Interesting info on the stats - We've seen this before where increasing the number of Series makes no difference because the bottleneck moves elsewhere - likely disk I/O. The most 'efficient' in your case is '4' - 5 may have have pushed the CPU just that little bit more before it started having to wait for disk I/O .. Thanks. 1 Link to comment Share on other sites More sharing options...
chef 3745 Posted September 19, 2021 Share Posted September 19, 2021 (edited) 1 hour ago, TBMike said: So I got a test server setup with 9 shows and 302 episodes. running the detection task gave the following results: Series Processed Average CPU Time Taken 2 24% 5min 4 50% 4min 16 secs 6 44% 4min 11 secs 8 30% 4min 23 secs I've just started checking the chapters, but so far so good. And you no longer see any SQLite error on the log? Edited September 19, 2021 by chef Link to comment Share on other sites More sharing options...
Cheesegeezer 3086 Posted September 19, 2021 Share Posted September 19, 2021 IT'S HERE VERSION 2.1.0.0 IntroSkip Instructions & Beta Releases - Tools and Utilities - Emby Community Please read through the instructions on the first post thoroughly before downloading the latest release. 8 Link to comment Share on other sites More sharing options...
TBMike 7 Posted September 19, 2021 Share Posted September 19, 2021 51 minutes ago, chef said: And you no longer see any SQLite error on the log? No, I think it was me that hadn't shut down the server properly before copying the db file. 1 Link to comment Share on other sites More sharing options...
chef 3745 Posted September 19, 2021 Share Posted September 19, 2021 If you experience SQL errors in that release up there, love to know. Thanks. Link to comment Share on other sites More sharing options...
TBMike 7 Posted September 19, 2021 Share Posted September 19, 2021 Is there any specific information or data you guys would like to see going forward? Link to comment Share on other sites More sharing options...
Cheesegeezer 3086 Posted September 19, 2021 Share Posted September 19, 2021 1 minute ago, TBMike said: Is there any specific information or data you guys would like to see going forward? We would like to know your results. Basically.... Was the detection time quicker than previous versions (if you can remember) Any weird or odd start and end times for a show/season in the UI did it miss any intros that you know are there. Any errors or Failed marked on any of the Scheduled Task we have to run. Overall experience of the plugin, is it working good for you or bad, how you think the UI is set up. Is it intuitive. Cheers. Can you also check your logs for the SQLlite error please. 1 Link to comment Share on other sites More sharing options...
TBMike 7 Posted September 19, 2021 Share Posted September 19, 2021 (edited) No sign of SQLite errors now, I'm pretty sure it was me screwing up the database. Here is a direct comparison between 2.0.3.5 and 2.1.0.0 running 2 episodes: Shows 13 Episodes 359 Shows 13 Episodes 359 Version 2.1.0.0 Version 2.0.3.5 No of Series Processed Time Taken 6min 24secs No of Series Processed Time Taken 8min 15secs 2 Average Min Max Total 2 Average Min Max Total Process Memory Used 165.6 MB 128.9 MB 178.7 MB --- Process Memory Used 231.9 MB 0.0 MB 310.4 MB --- Process Thread Count 19 14 28 --- Process Thread Count 19 0 39 --- Process Handle Count 811 797 879 --- Process Handle Count 814 0 988 --- Process Data Rate 10.9 MB/Sec 0.0 MB/Sec 142.7 MB/Sec 3.20 GB Process Data Rate 36.2 MB/Sec 0.0 MB/Sec 197.8 MB/Sec 10.62 GB Process Read Rate 6.2 MB/Sec 0.0 MB/Sec 85.2 MB/Sec 1.82 GB Process Read Rate 18.8 MB/Sec 0.0 MB/Sec 111.6 MB/Sec 5.50 GB Process Write Rate 4.7 MB/Sec 0.0 MB/Sec 57.6 MB/Sec 1.39 GB Process Write Rate 17.5 MB/Sec 0.0 MB/Sec 86.2 MB/Sec 5.11 GB Process Page Fault Rate 386 F/Sec 0 F/Sec 8763 F/Sec 115739 F/Sec Process Page Fault Rate 6102 F/Sec 0 F/Sec 284940 F/Sec 1830741 F/Sec Process Nonpaged Pool Used 0.1 MB 0.1 MB 0.1 MB --- Process Nonpaged Pool Used 0.1 MB 0.0 MB 0.1 MB --- The CPU values I was getting were maxed at 25% but Windows reported higher so something not right there. I've taken those values out. EDIT: Is the series to ignore setting working? I can't seem to add or take anything away from it. Edited September 19, 2021 by TBMike Adding more information Link to comment Share on other sites More sharing options...
BaukeZwart 94 Posted September 19, 2021 Share Posted September 19, 2021 Point 10 of the instruction advises to disable the task triggers. But if we do that how are new series and episodes handelend? What I did for now after running stage 1-3 manually is set triggers for all 3 Stepps to run at night 1 hour apart with a max running time of 1 hour for step 1 and 2 (should be more then enough after the initial setup I think). Is this OK? Link to comment Share on other sites More sharing options...
Cheesegeezer 3086 Posted September 19, 2021 Share Posted September 19, 2021 4 minutes ago, BaukeZwart said: Point 10 of the instruction advises to disable the task triggers. But if we do that how are new series and episodes handelend? What I did for now after running stage 1-3 manually is set triggers for all 3 Stepps to run at night 1 hour apart with a max running time of 1 hour for step 1 and 2 (should be more then enough after the initial setup I think). Is this OK? This is because the plugin is still in Development, so there is no point having them run all the time or on a trigger while we are testing. It could clog a system if it fails for what ever reason. 1 Link to comment Share on other sites More sharing options...
chef 3745 Posted September 19, 2021 Share Posted September 19, 2021 (edited) 35 minutes ago, TBMike said: No sign of SQLite errors now, I'm pretty sure it was me screwing up the database. Here is a direct comparison between 2.0.3.5 and 2.1.0.0 running 2 episodes: Shows 13 Episodes 359 Shows 13 Episodes 359 Version 2.1.0.0 Version 2.0.3.5 No of Series Processed Time Taken 6min 24secs No of Series Processed Time Taken 8min 15secs 2 Average Min Max Total 2 Average Min Max Total Process Memory Used 165.6 MB 128.9 MB 178.7 MB --- Process Memory Used 231.9 MB 0.0 MB 310.4 MB --- Process Thread Count 19 14 28 --- Process Thread Count 19 0 39 --- Process Handle Count 811 797 879 --- Process Handle Count 814 0 988 --- Process Data Rate 10.9 MB/Sec 0.0 MB/Sec 142.7 MB/Sec 3.20 GB Process Data Rate 36.2 MB/Sec 0.0 MB/Sec 197.8 MB/Sec 10.62 GB Process Read Rate 6.2 MB/Sec 0.0 MB/Sec 85.2 MB/Sec 1.82 GB Process Read Rate 18.8 MB/Sec 0.0 MB/Sec 111.6 MB/Sec 5.50 GB Process Write Rate 4.7 MB/Sec 0.0 MB/Sec 57.6 MB/Sec 1.39 GB Process Write Rate 17.5 MB/Sec 0.0 MB/Sec 86.2 MB/Sec 5.11 GB Process Page Fault Rate 386 F/Sec 0 F/Sec 8763 F/Sec 115739 F/Sec Process Page Fault Rate 6102 F/Sec 0 F/Sec 284940 F/Sec 1830741 F/Sec Process Nonpaged Pool Used 0.1 MB 0.1 MB 0.1 MB --- Process Nonpaged Pool Used 0.1 MB 0.0 MB 0.1 MB --- The CPU values I was getting were maxed at 25% but Windows reported higher so something not right there. I've taken those values out. EDIT: Is the series to ignore setting working? I can't seem to add or take anything away from it. I'll look at that right away. EDIT: yup target is off. I will fix! Thank you. Edited September 19, 2021 by chef 1 Link to comment Share on other sites More sharing options...
chef 3745 Posted September 19, 2021 Share Posted September 19, 2021 Cheese, I am syncing the exclude list button fix to the repo. 1 Link to comment Share on other sites More sharing options...
CBers 6766 Posted September 19, 2021 Share Posted September 19, 2021 Mobile view of the "Title Sequence Activity Log" tab in the plugins page is slightly off the edge of the screen on the left. Link to comment Share on other sites More sharing options...
Cheesegeezer 3086 Posted September 19, 2021 Share Posted September 19, 2021 13 minutes ago, CBers said: Mobile view of the "Title Sequence Activity Log" tab in the plugins page is slightly off the edge of the screen on the left. you could just rotate your display to make it landscape and then everything would fit on @chef shall we just rename it to activity log? 1 Link to comment Share on other sites More sharing options...
chef 3745 Posted September 19, 2021 Share Posted September 19, 2021 12 minutes ago, Cheesegeezer said: you could just rotate your display to make it landscape and then everything would fit on @chef shall we just rename it to activity log? Sure thing. Activity log is better. Html tables are never great on mobile. Auto organize has the same issue with a bad interface for mobile. Unfortunately, there isn't a quick fix for mobile use and the table. Perhaps there is some kind of css property or media query that could limit the table data for mobile, but I'm not sure. If there is a way to do it, I'll add it to auto organize too. 1 Link to comment Share on other sites More sharing options...
Cheesegeezer 3086 Posted September 19, 2021 Share Posted September 19, 2021 6 minutes ago, chef said: Sure thing. Activity log is better. Html tables are never great on mobile. Auto organize has the same issue with a bad interface for mobile. Unfortunately, there isn't a quick fix for mobile use and the table. Perhaps there is some kind of css property or media query that could limit the table data for mobile, but I'm not sure. If there is a way to do it, I'll add it to auto organize too. Cool well i'll leave you to pop that in with your current update 1 1 Link to comment Share on other sites More sharing options...
chef 3745 Posted September 19, 2021 Share Posted September 19, 2021 (edited) I was able to pull a bit more performance out of it, with some alterations. Check out these numbers: Yes those numbers are correct, running 5 series at once, and each detection only taking just over half a second, and memory under 100MB. I bet it could be faster too. I bet I can get each detection down to half a second. EDIT: Ops, I meant to put this in the dev channel... but it's cool because... fast computer things! Edited September 19, 2021 by chef 4 Link to comment Share on other sites More sharing options...
roaku 792 Posted September 19, 2021 Share Posted September 19, 2021 2 hours ago, chef said: Sure thing. Activity log is better. Html tables are never great on mobile. Auto organize has the same issue with a bad interface for mobile. Unfortunately, there isn't a quick fix for mobile use and the table. Perhaps there is some kind of css property or media query that could limit the table data for mobile, but I'm not sure. If there is a way to do it, I'll add it to auto organize too. I've used something similar to this in the past to handle table presentation on smaller screens. https://www.cssscript.com/pure-css-mobile-friendly-responsive-table/ Never tried it in the Emby UI though. 1 Link to comment Share on other sites More sharing options...
BillOatman 496 Posted September 19, 2021 Share Posted September 19, 2021 10 hours ago, Cheesegeezer said: IT'S HERE VERSION 2.1.0.0 IntroSkip Instructions & Beta Releases - Tools and Utilities - Emby Community Please read through the instructions on the first post thoroughly before downloading the latest release. Nice page Does this require Emby beta server still? If so probably should mention that on the instructions page 2 Link to comment Share on other sites More sharing options...
Recommended Posts