CBers 6742 Posted April 5, 2020 Share Posted April 5, 2020 @@Lighthammer I've had this plugin installed FOREVER and I finally went back and tinkered with the settings to figure out why it doesn't work. Nothing looks out of place. Here are screen shots: And here's the configuration: The top part looks corrupted because, as you can see, it continues to "spin" trying to load. I've been able to set all the settings before but they never hold. Its always reset when I go back to configure it again. The addon is acting like its either corrupt or looking for something. Is there something I am missing or is this in fact a broken plugin? Do we assume that this plugin is now dead/not fixable? If so should it not be removed from the plugin catalogue? Getting the same as above. @@Luke / @@ebr - suggest you remove this from the plugin catalogue for the time being, or until @@mutu310 is available again. 3 Link to comment Share on other sites More sharing options...
Carlo 4328 Posted July 17, 2020 Share Posted July 17, 2020 3.5 Months later and it's still just spinning and doing exactly as mentioned above. Link to comment Share on other sites More sharing options...
mutu310 70 Posted July 18, 2020 Author Share Posted July 18, 2020 (edited) On 7/17/2020 at 11:10 AM, cayars said: 3.5 Months later and it's still just spinning and doing exactly as mentioned above. Yes, it is. Thing is this plugin was fully working. Emby had changes to it that broke my code. I asked multiple times what I need to change to rectify the issues and I never got a satisfying response. I mean, if *I* was responsible for the Emby project and made changes that broke plugins, I'd go to their open source code and make pull requests to rectify the issues. But I've asked for support and I got zilc. Maybe this rant here changes something. I'm ready to fix things and make new features if I am advised what I need to do to fix the code, and I'm not talking pointers but actual code and covering all issues. Edited July 18, 2020 by mutu310 Link to comment Share on other sites More sharing options...
mutu310 70 Posted July 18, 2020 Author Share Posted July 18, 2020 @Luke @ebr please read previous post. Link to comment Share on other sites More sharing options...
Luke 36887 Posted July 18, 2020 Share Posted July 18, 2020 Sorry I must have missed it. Can you point me to that? Thanks. Link to comment Share on other sites More sharing options...
mutu310 70 Posted July 18, 2020 Author Share Posted July 18, 2020 Sorry I must have missed it. Can you point me to that? Thanks.Point you to what please?Here is the source: https://github.com/MarkCiliaVincenti/MediaBrowser.Channels.BlurNSome things changed and I can't find the problem because I'm unable to debug properly. Can you please make a pull request? I will remain actively working on this project if we can get it working again. 2 Link to comment Share on other sites More sharing options...
BKKK 4 Posted August 10, 2020 Share Posted August 10, 2020 My regular bump to this thread so it not forgotten Link to comment Share on other sites More sharing options...
Luke 36887 Posted August 10, 2020 Share Posted August 10, 2020 On 7/18/2020 at 2:14 PM, mutu310 said: Point you to what please? Here is the source: https://github.com/MarkCiliaVincenti/MediaBrowser.Channels.BlurN Some things changed and I can't find the problem because I'm unable to debug properly. Can you please make a pull request? I will remain actively working on this project if we can get it working again. @mutu310 What is the problem that needs looking at? Link to comment Share on other sites More sharing options...
Carlo 4328 Posted August 10, 2020 Share Posted August 10, 2020 (edited) Install the plugin and then try to configure it. You'll get a spinning circle and never been able to do the initial config. He's saying it was working fine but an Emby release broke it and he can't properly debug the problem so he needs a bit of help getting it back working again. Edited August 13, 2020 by cayars Link to comment Share on other sites More sharing options...
Luke 36887 Posted August 12, 2020 Share Posted August 12, 2020 Pull request submitted. Link to comment Share on other sites More sharing options...
mutu310 70 Posted August 13, 2020 Author Share Posted August 13, 2020 (edited) 12 hours ago, Luke said: Pull request submitted. Thanks for the pull request; what is the minimum Emby version for it? The problem with the pull request is that this won't fix BlurN... it will just make the configuration page work again. It won't get the scheduled tasks to work; that's the real problem, that there's three scheduled tasks which used to work and they're all broken now. Also, logged in at the mb3admin portal again, but there's no packages section anymore. Where do I make new releases from? Last but not least, where's the new NuGet repository? Edited August 13, 2020 by mutu310 1 Link to comment Share on other sites More sharing options...
Carlo 4328 Posted August 13, 2020 Share Posted August 13, 2020 Maybe this was my bad. I thought you needed help getting past the spinning circle to actually config the plugin. Did you expect Luke to go all through your code fixing it to work with the current release as if it's an Emby developed plugin? On 7/18/2020 at 2:14 PM, mutu310 said: Point you to what please? Here is the source: https://github.com/MarkCiliaVincenti/MediaBrowser.Channels.BlurN Some things changed and I can't find the problem because I'm unable to debug properly. Can you please make a pull request? I will remain actively working on this project if we can get it working again. What type of problem are you having with debugging? Maybe the better approach would be to help you get debugging working? Link to comment Share on other sites More sharing options...
mutu310 70 Posted August 13, 2020 Author Share Posted August 13, 2020 57 minutes ago, cayars said: Maybe this was my bad. I thought you needed help getting past the spinning circle to actually config the plugin. Did you expect Luke to go all through your code fixing it to work with the current release as if it's an Emby developed plugin? What type of problem are you having with debugging? Maybe the better approach would be to help you get debugging working? Of course I did. I've been developing this plugin and most of my changes were related to fixing the plugin because changes in Emby broke the plugin, and now it's gotten to the point where absolutely nothing was working. It's not fair on plugin developers; it is quite frustrating when changes done by other people break code that was working. Yes, debugging would go a long way, you see without being able to debug and without knowing what changes were done in Emby, it would be quite a bit of a trial-and-error and two bottles of whiskey. 1 Link to comment Share on other sites More sharing options...
Luke 36887 Posted August 13, 2020 Share Posted August 13, 2020 10 hours ago, mutu310 said: Thanks for the pull request; what is the minimum Emby version for it? The problem with the pull request is that this won't fix BlurN... it will just make the configuration page work again. It won't get the scheduled tasks to work; that's the real problem, that there's three scheduled tasks which used to work and they're all broken now. Also, logged in at the mb3admin portal again, but there's no packages section anymore. Where do I make new releases from? Last but not least, where's the new NuGet repository? Minimum emby version = the version number of the nuget package you are using. Link to comment Share on other sites More sharing options...
mutu310 70 Posted August 13, 2020 Author Share Posted August 13, 2020 On 8/13/2020 at 12:37 PM, Luke said: Minimum emby version = the version number of the nuget package you are using. I can't even update the nuget package. What you changed was the JS code, surely I need a minimum emby version for that no? @chef 1 Link to comment Share on other sites More sharing options...
Luke 36887 Posted August 13, 2020 Share Posted August 13, 2020 53 minutes ago, mutu310 said: I can't even update the nuget package. What you changed was the JS code, surely I need a minimum emby version for that no? In this case not necessarily, no. Link to comment Share on other sites More sharing options...
chef 3744 Posted August 27, 2020 Share Posted August 27, 2020 (edited) It's JQuery again. Guys we are moving away from JQuery. It isn't supported in the WebApp or dashboard. @mutu310 BlurN is a wonderful addition to the catalog and it is well received by the community. I hope that you will find the time to 86 the JQuery and refactor to VanillaJS. If there is anything I can do to help the migration, please let me know. It's easy enough, and if you are not entirely sure please see my github for some code examples for the JS, or PM me github.com/chefbennyj1 Edited August 27, 2020 by chef 1 Link to comment Share on other sites More sharing options...
GentleSoul 0 Posted October 16, 2020 Share Posted October 16, 2020 Still waiting like the plugin. Link to comment Share on other sites More sharing options...
mutu310 70 Posted October 18, 2020 Author Share Posted October 18, 2020 (edited) On 27/08/2020 at 22:51, chef said: It's JQuery again. Guys we are moving away from JQuery. It isn't supported in the WebApp or dashboard. @mutu310 BlurN is a wonderful addition to the catalog and it is well received by the community. I hope that you will find the time to 86 the JQuery and refactor to VanillaJS. If there is anything I can do to help the migration, please let me know. It's easy enough, and if you are not entirely sure please see my github for some code examples for the JS, or PM me github.com/chefbennyj1 I PMed you @chef. I intend bringing this back to life. Edited October 18, 2020 by mutu310 2 Link to comment Share on other sites More sharing options...
Carlo 4328 Posted October 18, 2020 Share Posted October 18, 2020 That's great news! Link to comment Share on other sites More sharing options...
BKKK 4 Posted November 13, 2020 Share Posted November 13, 2020 Time for another bump to this thread as it all seems to have gone a bit quite Link to comment Share on other sites More sharing options...
bakes82 86 Posted November 19, 2020 Share Posted November 19, 2020 What’s this plugin do? I see there is a trakt list with the blu ray release info. So I could probably make a channel that pulls that and slaps it into channel based on my trakt list code and his finding tmdb info. I’m not sure what configuration you would do or need. Why wouldn’t you just show them all. Or you could set filters in Emby? Link to comment Share on other sites More sharing options...
BKKK 4 Posted January 16, 2021 Share Posted January 16, 2021 Thread bump for 2021 Link to comment Share on other sites More sharing options...
BillOatman 492 Posted January 19, 2021 Share Posted January 19, 2021 (edited) Team Emby decided to change direction like @chef was referring too causing older plugins to change how the configuration page works. In order for this plugin to work, the JQuery configuration code needs to be replaced with generic javascript. That type of UI code is by far not my strength or I'd have a look. mutu310 hasn't logged on since last October. If anyone else is strong at that stuff go ahead, the current code is in github Edited January 19, 2021 by BillOatman Link to comment Share on other sites More sharing options...
mutu310 70 Posted January 19, 2021 Author Share Posted January 19, 2021 5 hours ago, BillOatman said: Team Emby decided to change direction like @chef was referring too causing older plugins to change how the configuration page works. In order for this plugin to work, the JQuery configuration code needs to be replaced with generic javascript. That type of UI code is by far not my strength or I'd have a look. mutu310 hasn't logged on since last October. If anyone else is strong at that stuff go ahead, the current code is in github It's not the UI that's the biggest worry. It's everything else. The UI is there to change some configuration, but with the configuration already set it still doesn't work. Without the ability for proper debugging it's too challenging to fix. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now