Juliusvanvern 0 Posted October 25, 2016 Share Posted October 25, 2016 Hallo zusammen, ich komme leider nicht weiter. Ich kann keine Medien aus der emby Weboberfläche abspielen. Die Bibliotheken wurden erzeugt und werden mit allen möglichen Informationen angezeigt, jedoch bei dem Versuch etwas ab zu spielen, passiert nix, es dreht sich nur ein Kreis. Es kommt auch keine Fehlermeldung einzig der drehende Kreis ist zu sehen. Hat jemand ein Tipp woran das liegen könnte? Was komisch ist, es sollte doch eigentlich der Prozess ffmpeg starten. Das Programm habe ich über apt-get installiert. Hier noch der Inhalt der wichtigsten Verzeichnisse. (vielleicht hilft das) Vielen Dank vorab root@juliusnas:~# ls -la /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby insgesamt 44 drwxr-xr-x 11 emby nogroup 4096 Okt 25 20:22 . drwxr-xr-x 13 root root 4096 Okt 25 19:32 .. drwxr-xr-x 13 emby nogroup 4096 Okt 25 21:31 cache drwxr-xr-x 4 emby nogroup 4096 Okt 25 21:55 config drwxr-xr-x 7 emby nogroup 4096 Okt 25 22:12 data lrwxrwxrwx 1 emby nogroup 21 Okt 25 19:32 ffmpeg -> /usr/local/bin/ffmpeg drwxr-xr-x 2 emby nogroup 4096 Okt 25 19:04 localization drwxr-xr-x 2 emby nogroup 4096 Okt 25 21:56 logs drwxr-xr-x 5 emby nogroup 4096 Okt 25 20:34 metadata drwxr-xr-x 3 emby nogroup 4096 Okt 25 19:04 root drwxr-xr-x 2 emby nogroup 4096 Okt 25 19:04 ssl drwxr-xr-x 2 emby nogroup 4096 Okt 25 20:22 transcoding-temp root@juliusnas:~# ls -la /usr/local/bin insgesamt 5232 drwxrwsr-x 3 root staff 4096 Okt 25 19:32 . drwxrwsr-x 10 root staff 4096 Jun 5 19:51 .. -rwxr-xr-x 1 root root 61030 Feb 9 2015 autoshutdown.sh -rwxr-xr-x 1 root root 635016 Feb 29 2016 disk2n -rwxr-xr-x 1 root root 8837 Feb 29 2016 factory_reset drwxr-sr-x 3 emby nogroup 4096 Okt 25 19:04 ffmpeg -rwxr-xr-x 1 root root 725256 Feb 29 2016 n2disk lrwxrwxrwx 1 root root 12 Feb 29 2016 n2disk10g -> n2disk10gdna -rwxr-xr-x 1 root root 741640 Feb 29 2016 n2disk10gdna -rwxr-xr-x 1 root root 737544 Feb 29 2016 n2disk10gzc -rwxr-xr-x 1 root root 725256 Feb 29 2016 n2disk1g -rwxr-xr-x 1 root root 733576 Feb 29 2016 n2disknt -rwxr-xr-x 1 root root 30928 Feb 29 2016 npcapdecompress -rwxr-xr-x 1 root root 129536 Feb 29 2016 npcapextract -rwxr-xr-x 1 root root 589864 Feb 29 2016 npcapindex -rwxr-xr-x 1 root root 18536 Feb 29 2016 npcapprintindex -rwxr-xr-x 1 root root 159408 Feb 29 2016 nprobe lrwxrwxrwx 1 root staff 15 Mär 4 2016 ntopng -> /usr/bin/ntopng -rwxr-xr-x 1 root root 10304 Feb 29 2016 nttool System: openmediavault version 2.2.12 Kernel Linux 3.16.0-0.bpo.4-amd64 ffmpeg installiert openmediavault-emby 2.7 Link to comment Share on other sites More sharing options...
Rackner 1 Posted October 26, 2016 Share Posted October 26, 2016 Hi, Wenn du eine Wiedergabe startest, was passiert denn auf der Server weboberfläche? Zeigt er an das ein client angemeldet ist, eine Wiedergabe gestartet hat und ob dies eine direkte Wiedergabe ist, oder transcodiert wird? Ist das System ein nas? Welche CPU Leistung hat es? Link to comment Share on other sites More sharing options...
Luke 36888 Posted October 26, 2016 Share Posted October 26, 2016 Zusätzlich geben Sie bitte die Emby Server-Protokoll. Die Anleitung, wie das zu tun ist hier zu finden: https://emby.media/community/index.php?/topic/739-how-to-report-a-problem/ Vielen Dank ! Link to comment Share on other sites More sharing options...
Juliusvanvern 0 Posted October 26, 2016 Author Share Posted October 26, 2016 (edited) Hi, Wenn du eine Wiedergabe startest, was passiert denn auf der Server weboberfläche? Zeigt er an das ein client angemeldet ist, eine Wiedergabe gestartet hat und ob dies eine direkte Wiedergabe ist, oder transcodiert wird? Ist das System ein nas? Welche CPU Leistung hat es? Ich hoffe ich verstehe dich richtig. Auf der Weboberfläche in der Server Administration, sehe ich nur das ein Benutzer angemeldet ist.(wo genau sehe ich ob etwas transcodiert wird?) Der Rechner ist nicht direkt ein NAS, setzt jedoch auf dem NAS-OS Openmediavault auf. (keine NAS-Lösung) Performance sollte reichen, aktuell läuft das Media Center Plex Zusätzlich geben Sie bitte die Emby Server-Protokoll. Die Anleitung, wie das zu tun ist hier zu finden: https://emby.media/community/index.php?/topic/739-how-to-report-a-problem/ Vielen Dank ! Emby Server-Protokoll liefere ich nach, wenn ich wieder zu hause ist. Schon einmal Danke für die Unterstützung. PS: solltet ihr noch Daten benötigen, einfach Bescheid geben. Anbei der Server-Log (hoffe der richtige) 2016-10-26 12:37:09.5709 Info App: Cannot direct play due to unknown content bitrate 2016-10-26 12:37:09.5709 Info App: Cannot direct play due to unknown content bitrate 2016-10-26 12:37:09.5709 Info App: Profile: Unknown Profile, Path: /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/Serien/Brooklyn Nine Nine/Staffel 1/Brooklyn.Nine.Nine.S01E01.Wir.fangen.Verbrecher.und.sehen.gut.dabei.aus.GERMAN.DL.DUBBED.720p.WebHD.x264-TVP/tvp-ninenine-s01e01-720p.mkv, isEligibleForDirectPlay: False, isEligibleForDirectStream: False 2016-10-26 12:37:09.5709 Info App: Cannot direct play due to unknown content bitrate 2016-10-26 12:37:09.5709 Info App: Cannot direct play due to unknown content bitrate 2016-10-26 12:37:09.5709 Info App: Profile: Unknown Profile, Path: /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/Serien/Brooklyn Nine Nine/Staffel 1/Brooklyn.Nine.Nine.S01E01.Wir.fangen.Verbrecher.und.sehen.gut.dabei.aus.GERMAN.DL.DUBBED.720p.WebHD.x264-TVP/tvp-ninenine-s01e01-720p.mkv, isEligibleForDirectPlay: False, isEligibleForDirectStream: False 2016-10-26 12:37:09.5709 Info App: Cannot direct play due to unknown content bitrate 2016-10-26 12:37:09.5709 Info App: Cannot direct play due to unknown content bitrate 2016-10-26 12:37:09.5709 Info App: Profile: Unknown Profile, Path: /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/Serien/Brooklyn Nine Nine/Staffel 1/Brooklyn.Nine.Nine.S01E01.Wir.fangen.Verbrecher.und.sehen.gut.dabei.aus.GERMAN.DL.DUBBED.720p.WebHD.x264-TVP/tvp-ninenine-s01e01-720p.mkv, isEligibleForDirectPlay: False, isEligibleForDirectStream: False 2016-10-26 12:37:09.5727 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 56ms. http://julius-d.ddns.net:8096/emby/Items/58f2bdc6259825eac73eda964eb8aae3/PlaybackInfo?UserId=ae7794c754864541b1eadfab8418a581&StartTimeTicks=0 2016-10-26 12:37:09.9201 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 788ms. http://julius-d.ddns.net:8096/emby/Playback/BitrateTest?Size=1000000 2016-10-26 12:37:10.1249 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/videos/58f2bdc6259825eac73eda964eb8aae3/live.m3u8?DeviceId=692bcf77849c35286178d317069ae335da2a24c4&MediaSourceId=58f2bdc6259825eac73eda964eb8aae3&VideoCodec=h264&AudioCodec=aac&VideoBitrate=83286261&AudioBitrate=192000&MaxAudioChannels=6&Level=41&Profile=high&PlaySessionId=7648158d5f01449d8bb3db0907fa2274&CopyTimestamps=false&TranscodingMaxAudioChannels=2&EnableSubtitlesInManifest=false&Tag=f4bd255d48dd1bcb6e0384501885fcdf&EnableSplittingOnNonKeyFrames=false. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:10.1504 Info App: ffmpeg -fflags +genpts -i file:"/media/ee992f3b-f191-4b1a-86e0-47f848a000b6/Serien/Brooklyn Nine Nine/Staffel 1/Brooklyn.Nine.Nine.S01E01.Wir.fangen.Verbrecher.und.sehen.gut.dabei.aus.GERMAN.DL.DUBBED.720p.WebHD.x264-TVP/tvp-ninenine-s01e01-720p.mkv" -map_metadata -1 -threads 0 -sn -codec:v:0 libx264 -pix_fmt yuv420p -preset superfast -crf 23 -tune zerolatency -b:v 83286261 -maxrate 83286261 -bufsize 166572522 -vsync -1 -profile:v high -level 4.1 -force_key_frames "expr:gte(t,n_forced*3)" -flags -global_header -sc_threshold 0 -codec:a:0 aac -strict experimental -ac 2 -ab 192000 -af "adelay=1,aresample=async=1" -hls_time 3 -start_number 0 -hls_list_size 0 -hls_base_url "hls/16affb1cd2767ae528510f9b86048860/" -y "/media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby/transcoding-temp/16affb1cd2767ae528510f9b86048860.m3u8" 2016-10-26 12:37:10.3649 Info App: FFMpeg exited with code 1 2016-10-26 12:37:11.4364 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 2223ms (slow). http://julius-d.ddns.net:8096/emby/Playback/BitrateTest?Size=2400000 2016-10-26 12:37:20.9436 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/ScheduledTasks. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:20.9464 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/Notifications/ae7794c754864541b1eadfab8418a581/Summary. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:20.9464 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/Sessions. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:20.9486 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/System/Info. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:20.9649 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/News/Product?StartIndex=0&Limit=7. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:20.9680 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 24ms. http://julius-d.ddns.net:8096/emby/ScheduledTasks 2016-10-26 12:37:20.9927 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 44ms. http://julius-d.ddns.net:8096/emby/System/Info 2016-10-26 12:37:20.9949 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 48ms. http://julius-d.ddns.net:8096/emby/Sessions 2016-10-26 12:37:20.9966 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 32ms. http://julius-d.ddns.net:8096/emby/News/Product?StartIndex=0&Limit=7 2016-10-26 12:37:21.0301 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/System/ActivityLog/Entries?startIndex=0&limit=7&minDate=2016-10-25T10:37:20.757Z. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:21.0351 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 89ms. http://julius-d.ddns.net:8096/emby/Notifications/ae7794c754864541b1eadfab8418a581/Summary 2016-10-26 12:37:21.0447 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 15ms. http://julius-d.ddns.net:8096/emby/System/ActivityLog/Entries?startIndex=0&limit=7&minDate=2016-10-25T10:37:20.757Z 2016-10-26 12:37:21.0577 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/DisplayPreferences/dashboard?userId=ae7794c754864541b1eadfab8418a581&client=dashboard. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:21.0694 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 12ms. http://julius-d.ddns.net:8096/emby/DisplayPreferences/dashboard?userId=ae7794c754864541b1eadfab8418a581&client=dashboard 2016-10-26 12:37:21.1460 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/Plugins/SecurityInfo. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:21.1476 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/Packages/Updates?PackageType=UserInstalled. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:21.1532 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 7ms. http://julius-d.ddns.net:8096/emby/Plugins/SecurityInfo 2016-10-26 12:37:21.1539 Info InstallationManager: Opening /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby/cache/serverpackages.json 2016-10-26 12:37:21.2233 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 76ms. http://julius-d.ddns.net:8096/emby/Packages/Updates?PackageType=UserInstalled 2016-10-26 12:37:21.2910 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/Plugins/SecurityInfo. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:21.2981 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 7ms. http://julius-d.ddns.net:8096/emby/Plugins/SecurityInfo 2016-10-26 12:37:21.3639 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/Packages/Updates?PackageType=System. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 2016-10-26 12:37:21.3701 Info HttpClient: Checking for cache file /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby/cache/httpclient/f70ca6622474da8168a3b6c06f651a16 2016-10-26 12:37:21.3833 Info HttpClient: HttpClientManager GET: https://api.github.com/repos/MediaBrowser/Emby/releases 2016-10-26 12:37:27.4539 Info HttpServer: HTTP Response 200 to 195.212.29.168. Time: 6090ms (slow). http://julius-d.ddns.net:8096/emby/Packages/Updates?PackageType=System 2016-10-26 12:41:22.0276 Error HttpServer: Error in SharpWebSocket: An exception has occurred while receiving a message.. Exception.Message: Unable to read data from the transport connection: Connection reset by peer. 2016-10-26 12:42:20.9357 Info HttpServer: HTTP GET http://julius-d.ddns.net:8096/emby/videos/58f2bdc6259825eac73eda964eb8aae3/live.m3u8?DeviceId=692bcf77849c35286178d317069ae335da2a24c4&MediaSourceId=58f2bdc6259825eac73eda964eb8aae3&VideoCodec=h264&AudioCodec=aac&VideoBitrate=83286261&AudioBitrate=192000&MaxAudioChannels=6&Level=41&Profile=high&PlaySessionId=7648158d5f01449d8bb3db0907fa2274&CopyTimestamps=false&TranscodingMaxAudioChannels=2&EnableSubtitlesInManifest=false&Tag=f4bd255d48dd1bcb6e0384501885fcdf&EnableSplittingOnNonKeyFrames=false. UserAgent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:45.0) Gecko/20100101 Firefox/45.0 Was mir auffällt ist der Folgende Punkt: 2016-10-26 12:37:09.5709 Info App: Cannot direct play due to unknown content bitrate Ist das möglicherweise schon der Fehler? Desweiteren habe ich ich noch folgenden Error in der Log 2016-10-26 12:36:33.6716 Error HttpServer: Error processing request for /emby/Users/authenticatebyname *** Error Report *** Version: 3.0.8300.0 Command line: /opt/emby/MediaBrowser.Server.Mono.exe -programdata /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby -restartpath /usr/sbin/emby.sh Operating system: Unix 3.16.0.0 Processor count: 2 64-Bit OS: True 64-Bit Process: True Program data path: /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby Mono: 4.6.1 (Stable 4.6.1.5/ef43c15 Wed Oct 12 09:10:37 UTC 2016) Application Path: /opt/emby/MediaBrowser.Server.Mono.exe Invalid user or password entered. ServiceStack.HttpError No Stack Trace Available InnerException: MediaBrowser.Controller.Net.SecurityException Invalid user or password entered. at MediaBrowser.Server.Implementations.Session.SessionManager+<AuthenticateNewSessionInternal>d__106.MoveNext () [0x00278] in <e36bce1ff65f413585edc97cf7d42376>:0 --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () [0x0000c] in <dca3b561b8ad4f9fb10141d81b39ff45>:0 at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess (System.Threading.Tasks.Task task) [0x0004e] in <dca3b561b8ad4f9fb10141d81b39ff45>:0 at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification (System.Threading.Tasks.Task task) [0x0002e] in <dca3b561b8ad4f9fb10141d81b39ff45>:0 at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd (System.Threading.Tasks.Task task) [0x0000b] in <dca3b561b8ad4f9fb10141d81b39ff45>:0 at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1+ConfiguredTaskAwaiter[TResult].GetResult () [0x00000] in <dca3b561b8ad4f9fb10141d81b39ff45>:0 at MediaBrowser.Api.UserService+<Post>d__17.MoveNext () [0x00161] in <f40c0559ba2142d28ef75f739070b0c1>:0 Besten Dank Edited October 26, 2016 by Juliusvanvern Link to comment Share on other sites More sharing options...
Rackner 1 Posted October 26, 2016 Share Posted October 26, 2016 (edited) Hi, ja du hast mich richtig verstanden, genau in der übersicht sieht man wenn ein client etwas abspielt und wie er es abspielt. Wenn der client also die datei abspielt dann siehst du das da. aber von der Leistung her sollte es reichen. in den logs hab ich, neben den von dir erwähnten fehler, auch noch diese fehler gefunden: 2016-10-26 12:41:22.0276 Error HttpServer: Error in SharpWebSocket: An exception has occurred while receiving a message.. Exception.Message: Unable to read data from the transport connection: Connection reset by peer. InnerException: MediaBrowser.Controller.Net.SecurityException Invalid user or password entered. hast du IPv4 und/oder IPv6? eventuell mal nur IPv4 nutzen, IPv6 deaktivieren im router oder in der netzwerkkarte. was nutzt du als Client? ffmpeg ist aktuell? Edited October 26, 2016 by Rackner Link to comment Share on other sites More sharing options...
Juliusvanvern 0 Posted October 26, 2016 Author Share Posted October 26, 2016 Hi, also ich nutze only-IPv4 Router / Client / ect. Ich versuche per Browser zu Streamen, dabei habe ich einmal mit dem Firefox sowie dem Chrome Browser getestet. Des weiteren habe ich es von verschiedenen Rechnern Probiert, sogar von Arbeit aus überall das gleiche. Ach ja, über die emby app geht es auch nicht. ffmpeg ist aktuell, ich habe die repository noch einmal aktualisiert (es gab keine updates). Hier mal noch der transcoding-log http://julius-d.ddns.net:8096/emby/videos/58f2bdc6259825eac73eda964eb8aae3/live.m3u8?DeviceId=692bcf77849c35286178d317069ae335da2a24c4&MediaSourceId=58f2bdc6259825eac73eda964eb8aae3&VideoCodec=h264&AudioCodec=aac&VideoBitrate=83286261&AudioBitrate=192000&MaxAudioChannels=6&Level=41&Profile=high&PlaySessionId=7648158d5f01449d8bb3db0907fa2274&api_key=69e39376ddb04c3fb450b83fc18513cd&CopyTimestamps=false&TranscodingMaxAudioChannels=2&EnableSubtitlesInManifest=false&Tag=f4bd255d48dd1bcb6e0384501885fcdf&EnableSplittingOnNonKeyFrames=false {"Protocol":"File","Id":"58f2bdc6259825eac73eda964eb8aae3","Path":"/media/ee992f3b-f191-4b1a-86e0-47f848a000b6/Serien/Brooklyn Nine Nine/Staffel 1/Brooklyn.Nine.Nine.S01E01.Wir.fangen.Verbrecher.und.sehen.gut.dabei.aus.GERMAN.DL.DUBBED.720p.WebHD.x264-TVP/tvp-ninenine-s01e01-720p.mkv","Type":"Default","Container":"mkv","Name":"","ETag":"f4bd255d48dd1bcb6e0384501885fcdf","ReadAtNativeFramerate":false,"SupportsTranscoding":true,"SupportsDirectStream":true,"SupportsDirectPlay":true,"IsInfiniteStream":false,"RequiresOpening":false,"RequiresClosing":false,"SupportsProbing":true,"VideoType":"VideoFile","MediaStreams":[],"PlayableStreamFileNames":[],"Formats":[],"RequiredHttpHeaders":{}} ffmpeg -fflags +genpts -i file:"/media/ee992f3b-f191-4b1a-86e0-47f848a000b6/Serien/Brooklyn Nine Nine/Staffel 1/Brooklyn.Nine.Nine.S01E01.Wir.fangen.Verbrecher.und.sehen.gut.dabei.aus.GERMAN.DL.DUBBED.720p.WebHD.x264-TVP/tvp-ninenine-s01e01-720p.mkv" -map_metadata -1 -threads 0 -sn -codec:v:0 libx264 -pix_fmt yuv420p -preset superfast -crf 23 -tune zerolatency -b:v 83286261 -maxrate 83286261 -bufsize 166572522 -vsync -1 -profile:v high -level 4.1 -force_key_frames "expr:gte(t,n_forced*3)" -flags -global_header -sc_threshold 0 -codec:a:0 aac -strict experimental -ac 2 -ab 192000 -af "adelay=1,aresample=async=1" -hls_time 3 -start_number 0 -hls_list_size 0 -hls_base_url "hls/16affb1cd2767ae528510f9b86048860/" -y "/media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby/transcoding-temp/16affb1cd2767ae528510f9b86048860.m3u8" ffmpeg version 0.8.18-6:0.8.18-0+deb7u1, Copyright (c) 2000-2014 the Libav developers built on Oct 4 2016 17:59:06 with gcc 4.7.2 The ffmpeg program is only provided for script compatibility and will be removed in a future release. It has been deprecated in the Libav project to allow for incompatible command line syntax improvements in its replacement called avconv (see Changelog for details). Please use avconv instead. [matroska,webm @ 0xd78c60] Estimating duration from bitrate, this may be inaccurate Seems stream 0 codec frame rate differs from container frame rate: 2000.00 (2000/1) -> 23.98 (24000/1001) Input #0, matroska,webm, from 'file:/media/ee992f3b-f191-4b1a-86e0-47f848a000b6/Serien/Brooklyn Nine Nine/Staffel 1/Brooklyn.Nine.Nine.S01E01.Wir.fangen.Verbrecher.und.sehen.gut.dabei.aus.GERMAN.DL.DUBBED.720p.WebHD.x264-TVP/tvp-ninenine-s01e01-720p.mkv': Metadata: title : Brooklyn.Nine.Nine.S01E01.Wir.fangen.Verbrecher.und.sehen.gut.dabei.aus.GERMAN.DL.DUBBED.720p.WebHD.x264-TVP Duration: 00:22:45.12, start: 0.000000, bitrate: 576 kb/s Stream #0.0(ger): Video: h264 (High), yuv420p, 1280x720 [PAR 1:1 DAR 16:9], 23.98 fps, 23.98 tbr, 1k tbn, 2k tbc (default) (forced) Metadata: title : tvp-ninenine-s01e01-720p Stream #0.1(ger): Audio: ac3, 48000 Hz, stereo, s16, 192 kb/s (default) (forced) Stream #0.2(eng): Audio: ac3, 48000 Hz, 5.1, s16, 384 kb/s Unrecognized option 'codec:v:0' Failed to set value 'libx264' for option 'codec:v:0' Danke Link to comment Share on other sites More sharing options...
Rackner 1 Posted October 27, 2016 Share Posted October 27, 2016 guten morgen, kannst du für luke noch den Server log als txt hier bereit stellen? am besten dazu den Server runter fahren > alle logs löschen > Server starten > Client starten > film starten (fehler produzieren) > kurz warten > Server runter fahren > log uploaden. vielleicht kann luke dann etwas dazu sagen. ich weis ja nicht wie aufwändig es ist bei Linux (hab ich keine Ahnung von) aber eventuell mal deinstallieren und neu installieren? Link to comment Share on other sites More sharing options...
Juliusvanvern 0 Posted October 27, 2016 Author Share Posted October 27, 2016 (edited) Moin moin, hier erst einmal die Logs frisch nach den Neustart bzw shutdown vom Emby Server. Vielen dank schon mal. Edit: Was mir in den Logs auch aufgefallen ist, die Folgende Meldung: *** Error Report *** Version: 3.0.8300.0 Command line: /opt/emby/MediaBrowser.Server.Mono.exe -programdata /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby -restartpath /usr/sbin/emby.sh Operating system: Unix 3.16.0.0 Processor count: 2 64-Bit OS: True 64-Bit Process: True Program data path: /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby Mono: 4.6.1 (Stable 4.6.1.5/ef43c15 Wed Oct 12 09:10:37 UTC 2016) Application Path: /opt/emby/MediaBrowser.Server.Mono.exe Access token is required. MediaBrowser.Controller.Net.SecurityException at MediaBrowser.Server.Implementations.HttpServer.Security.AuthService.ValidateSecurityToken (MediaBrowser.Controller.Net.IServiceRequest request, System.String token) [0x00012] in <e36bce1ff65f413585edc97cf7d42376>:0 at MediaBrowser.Server.Implementations.HttpServer.Security.AuthService.ValidateUser (MediaBrowser.Controller.Net.IServiceRequest request, MediaBrowser.Controller.Net.IAuthenticationAttributes authAttribtues) [0x0002f] in <e36bce1ff65f413585edc97cf7d42376>:0 at MediaBrowser.Server.Implementations.HttpServer.Security.AuthService.Authenticate (MediaBrowser.Controller.Net.IServiceRequest request, MediaBrowser.Controller.Net.IAuthenticationAttributes authAttribtues) [0x00000] in <e36bce1ff65f413585edc97cf7d42376>:0 at MediaBrowser.Controller.Net.AuthenticatedAttribute.RequestFilter (ServiceStack.Web.IRequest request, ServiceStack.Web.IResponse response, System.Object requestDto) [0x0000d] in <2e51af35822640b68494878d43a3786b>:0 at ServiceStack.ServiceStackHost.ApplyRequestFiltersSingle (ServiceStack.Web.IRequest req, ServiceStack.Web.IResponse res, System.Object requestDto) [0x000cc] in <d43033603ec44e2fb3eac944675e834e>:0 at ServiceStack.ServiceStackHost.ApplyRequestFilters (ServiceStack.Web.IRequest req, ServiceStack.Web.IResponse res, System.Object requestDto) [0x00039] in <d43033603ec44e2fb3eac944675e834e>:0 at ServiceStack.Host.RestHandler+<ProcessRequestAsync>d__13.MoveNext () [0x00165] in <d43033603ec44e2fb3eac944675e834e>:0 Wozu ist die "mono.exe" notwendig, also was macht sie? bzw warum ist sie eine "exe"? ffmpeg-transcode-0a79c435-a57d-476b-9f66-31598899cc61.txt server-63613160156.txt Edited October 27, 2016 by Juliusvanvern Link to comment Share on other sites More sharing options...
Luke 36888 Posted October 28, 2016 Share Posted October 28, 2016 Sie haben noch ffmpeg installiert. Sie haben libav, die nicht die gleiche ist. Was können Sie tun, ist herunterladen ffmpeg von hier: https://www.johnvansickle.com/ffmpeg/ Dann konfigurieren Sie diese im Emby Server Armaturenbrett unter Umcodierung. Link to comment Share on other sites More sharing options...
Juliusvanvern 0 Posted October 30, 2016 Author Share Posted October 30, 2016 Sie haben noch ffmpeg installiert. Sie haben libav, die nicht die gleiche ist. Was können Sie tun, ist herunterladen ffmpeg von hier: https://www.johnvansickle.com/ffmpeg/ Dann konfigurieren Sie diese im Emby Server Armaturenbrett unter Umcodierung. Hi, thanks for your Info. But i get a error message, after i tried to set manuel the path to ffmpeg transcoding software. I tried it with both versions. Without success. :-/ Sorry for delay, i was out of my town. Link to comment Share on other sites More sharing options...
Luke 36888 Posted October 30, 2016 Share Posted October 30, 2016 Please attach the emby server log, thanks. Link to comment Share on other sites More sharing options...
Juliusvanvern 0 Posted October 31, 2016 Author Share Posted October 31, 2016 In following the attached server log thanks in advance for your help. server-63613382399.txt Link to comment Share on other sites More sharing options...
Luke 36888 Posted October 31, 2016 Share Posted October 31, 2016 if you run ffmpeg -version what does it print? Link to comment Share on other sites More sharing options...
Juliusvanvern 0 Posted October 31, 2016 Author Share Posted October 31, 2016 if you run ffmpeg -version what does it print? Hi, i get the following: root@juliusnas:~# ffmpeg -version ffmpeg version 0.8.18-6:0.8.18-0+deb7u1, Copyright (c) 2000-2014 the Libav developers built on Oct 4 2016 17:59:06 with gcc 4.7.2 The ffmpeg program is only provided for script compatibility and will be removed in a future release. It has been deprecated in the Libav project to allow for incompatible command line syntax improvements in its replacement called avconv (see Changelog for details). Please use avconv instead. ffmpeg 0.8.18-6:0.8.18-0+deb7u1 libavutil 51. 22. 3 / 51. 22. 3 libavcodec 53. 35. 0 / 53. 35. 0 libavformat 53. 21. 1 / 53. 21. 1 libavdevice 53. 2. 0 / 53. 2. 0 libavfilter 2. 15. 0 / 2. 15. 0 libswscale 2. 1. 0 / 2. 1. 0 libpostproc 52. 0. 0 / 52. 0. 0 Link to comment Share on other sites More sharing options...
xenu 10 Posted November 2, 2016 Share Posted November 2, 2016 (edited) I had problems transcoding using the latest static ffmpeg 3.2. When I reverted back to 3.1.4 everything worked fine again. Edit: I just checked again and playing media in my browser worked with ffmpeg 3.2. Last time I tried I was using the "Emby for Android TV" App on my Nvidia Shield and I couldn't get any video to play. Will have to test again when I get home. Edited November 2, 2016 by xenu Link to comment Share on other sites More sharing options...
Luke 36888 Posted November 2, 2016 Share Posted November 2, 2016 Thanks for the update. Link to comment Share on other sites More sharing options...
Juliusvanvern 0 Posted November 4, 2016 Author Share Posted November 4, 2016 Did my information help you? Thanks Link to comment Share on other sites More sharing options...
Luke 36888 Posted November 6, 2016 Share Posted November 6, 2016 Did my information help you? Thanks Try configuring ffmpeg again in the web interface, but this time point directly to the ffmpeg executable instead of the parent folder. Please let me know if this makes any difference. thanks. Link to comment Share on other sites More sharing options...
Emby Tower 33 Posted November 7, 2016 Share Posted November 7, 2016 Moin moin, hier erst einmal die Logs frisch nach den Neustart bzw shutdown vom Emby Server. Vielen dank schon mal. Edit: Was mir in den Logs auch aufgefallen ist, die Folgende Meldung: *** Error Report *** Version: 3.0.8300.0 Command line: /opt/emby/MediaBrowser.Server.Mono.exe -programdata /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby -restartpath /usr/sbin/emby.sh Operating system: Unix 3.16.0.0 Processor count: 2 64-Bit OS: True 64-Bit Process: True Program data path: /media/ee992f3b-f191-4b1a-86e0-47f848a000b6/emby Mono: 4.6.1 (Stable 4.6.1.5/ef43c15 Wed Oct 12 09:10:37 UTC 2016) Application Path: /opt/emby/MediaBrowser.Server.Mono.exe Access token is required. MediaBrowser.Controller.Net.SecurityException at MediaBrowser.Server.Implementations.HttpServer.Security.AuthService.ValidateSecurityToken (MediaBrowser.Controller.Net.IServiceRequest request, System.String token) [0x00012] in <e36bce1ff65f413585edc97cf7d42376>:0 at MediaBrowser.Server.Implementations.HttpServer.Security.AuthService.ValidateUser (MediaBrowser.Controller.Net.IServiceRequest request, MediaBrowser.Controller.Net.IAuthenticationAttributes authAttribtues) [0x0002f] in <e36bce1ff65f413585edc97cf7d42376>:0 at MediaBrowser.Server.Implementations.HttpServer.Security.AuthService.Authenticate (MediaBrowser.Controller.Net.IServiceRequest request, MediaBrowser.Controller.Net.IAuthenticationAttributes authAttribtues) [0x00000] in <e36bce1ff65f413585edc97cf7d42376>:0 at MediaBrowser.Controller.Net.AuthenticatedAttribute.RequestFilter (ServiceStack.Web.IRequest request, ServiceStack.Web.IResponse response, System.Object requestDto) [0x0000d] in <2e51af35822640b68494878d43a3786b>:0 at ServiceStack.ServiceStackHost.ApplyRequestFiltersSingle (ServiceStack.Web.IRequest req, ServiceStack.Web.IResponse res, System.Object requestDto) [0x000cc] in <d43033603ec44e2fb3eac944675e834e>:0 at ServiceStack.ServiceStackHost.ApplyRequestFilters (ServiceStack.Web.IRequest req, ServiceStack.Web.IResponse res, System.Object requestDto) [0x00039] in <d43033603ec44e2fb3eac944675e834e>:0 at ServiceStack.Host.RestHandler+<ProcessRequestAsync>d__13.MoveNext () [0x00165] in <d43033603ec44e2fb3eac944675e834e>:0 Wozu ist die "mono.exe" notwendig, also was macht sie? bzw warum ist sie eine "exe"? Mono ist eine OS-unabhängige Implementierung des .NET Frameworks .. Emby Server basiert auf .NET und liefert Mono daher immer mit ... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now