Murf 3 Posted April 21, 2016 Share Posted April 21, 2016 The other night we lost internet, Router was still working, and both Roku and media PC are hardwired to the router. Was not able to get Emby via the Roku though. The server was added using local ip, but still could not access it. Did I miss something or is internet access required? Link to comment Share on other sites More sharing options...
speechles 1917 Posted April 21, 2016 Share Posted April 21, 2016 (edited) Are you manually entering a server to connect to, or using the pin method via emby connect? Internet connection isnt required. If the server is on the same LAN as the client you should be able to manually specify a server. It will auto-discover the server. Choose it and you should be fine. If it doesnt auto-discover use new server and manually specify the LAN ip the server uses. If you choose emby connect and use the pin method this might be what is causing the app to require an internet connection. I use manual auto-discovery and there are times I have been without internet for several hours. I could still log in and out of the server on my roku and watch anything in my library. Also note: everything in the roku app is self-contained. When the app launches there is nothing downloaded by it from the internet to enable functionality. All the scripts/images/themes/etc used are all included in the app. Also note: If your router went down, then came back up, like you cycled it to see why the internet was broken which I do at times too. You might need to reboot the roku after the router has rebooted each time. Otherwise you may get ports stuck open on the roku and this causes the problem. Ive had this occur before when my internet was misbehaving. Rebooting the roku immediately solved it. Edited April 21, 2016 by speechles Link to comment Share on other sites More sharing options...
Luke 37007 Posted April 21, 2016 Share Posted April 21, 2016 Internet access is not required to connect using a local ip address. Link to comment Share on other sites More sharing options...
Vidman 589 Posted April 22, 2016 Share Posted April 22, 2016 (edited) ... Except to verify premiere status for the server occasionally so that premium features are available Edited April 22, 2016 by Vidman Link to comment Share on other sites More sharing options...
speechles 1917 Posted April 22, 2016 Share Posted April 22, 2016 (edited) ... Except to verify premiere status right?Wrong. The roku app merely makes use of the isSuppoter flag which is generated by the server. The server needs to verify the premiere status from time to time. Everyone using the roku app can enjoy those benefits if the server they connect through is registered with emby premiere. There are no paywalls on the roku app. The roku app is 100% free and does not call home. Emby premiere adds to the roku both cover art and livetv max channels 80 instead of 5. Sent from my Nexus 7 using Tapatalk Edited April 22, 2016 by speechles Link to comment Share on other sites More sharing options...
Vidman 589 Posted April 22, 2016 Share Posted April 22, 2016 (edited) I've edited my post to make my meaning a little more clear Edited April 22, 2016 by Vidman Link to comment Share on other sites More sharing options...
Murf 3 Posted April 22, 2016 Author Share Posted April 22, 2016 Router never reset, just lost internet, could not get into emby app to do anything, it was stuck on retrieving, never gave any option to choose another server. Link to comment Share on other sites More sharing options...
speechles 1917 Posted April 22, 2016 Share Posted April 22, 2016 (edited) Router never reset, just lost internet, could not get into emby app to do anything, it was stuck on retrieving, never gave any option to choose another server.Hmmm... It should let you regardless of internet connectivity. You can also try adding the blue neon night app on your roku too. Then next time this happens try using the official app and blue neon app. One of them should work. But if both fail there is something odd happening on your network. Sent from my Nexus 7 using Tapatalk Edited April 22, 2016 by speechles Link to comment Share on other sites More sharing options...
Murf 3 Posted April 23, 2016 Author Share Posted April 23, 2016 I can make it happen at any time by unplugging my modem. Router is still connected, computer and roku both hard wired in. Just stays on retrieving when there is no internet connection, no options to add.change servers Link to comment Share on other sites More sharing options...
Murf 3 Posted April 25, 2016 Author Share Posted April 25, 2016 Ok, so i went into Emby app on the Roku, Went into Change Server, in that list was Home server, add server and sign out of Emby connect. I tried adding my local 192 server ip and nothing changed. So I clicked on Sign our of Emby connect and it took me out of the Emby app. Now when I try to go into it, it says 'Retrieving' for about 15 seconds and then goes back to the Roku home screen. How do I get connected back to my server? Link to comment Share on other sites More sharing options...
Luke 37007 Posted April 25, 2016 Share Posted April 25, 2016 i wonder if the channel has run out of space to save data. i would try removing all emby roku apps and then install and try from a fresh start. Link to comment Share on other sites More sharing options...
Murf 3 Posted April 25, 2016 Author Share Posted April 25, 2016 (edited) Ok only have the one app on my roku, Ill give that a shot. Ok that worked, I added server manually and chose Home Server. Now if I take my roku somewhere it should work fine there as well correct? Or will need to connect to my server differently? Edited April 25, 2016 by Murf Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now