Jump to content
Luke

Ubuntu

Recommended Posts

michalb

If tat is of any help:

        EnablePlaybackRemuxing: True
        EnableVideoPlaybackTranscoding: True
        EnableAudioPlaybackTranscoding: True
 
>>>>>>  Affected codecs
Encoder libx264 Software Encoder
        Profiles: Baseline Profile (Level 6.2), Main Profile (Level 6.2), High Profile (Level 6.2), High 10 Profile (Level 6.2), High 4:2:2 Profile (Level 6.2), High 4:4:4 Predictive Profile (Level 6.2)
 
 
>>>>>>  FindVideoEncoder - Media: h264, UseHardwareCodecs: True, Mode: Automatic
Info    Checking: 'libx264 Software Encoder'
Info    Check successful - selecting 'libx264 Software Encoder'
 
>>>>>>  FindVideoDecoder - MediaType: hevc, Mode: Automatic
Info    Checking: 'Automatic software decoder'
Info    Check successful - selecting 'Automatic software decoder'
 
>>>>>>  Processing Plan
Info    Name                                        CanDoInHardware      WillDoInHardware     Reason                                  
Info    Automatic software decoder               >> False                False                Software Codec                           
Info    VideoInput                               >> False                False                Not a hardware decoder                   
Info    ColorConversion                          >> False                False                                                         
Info    SubtitleOverlay                          >> False                False                                                         
Info    VideoOutput                              >> False                False                Not a hardware encoder                   
Info    libx264 Software Encoder                 >> False                False                Software Codec                           
 
>>>>>>  Projected Processing Formats
Info    Previous                HW-Context   Format       SW-Format       Next
Info    hevc                 >> -            yuv420p10    yuv420p10    >> format
Info    format               >> -            yuv420p      yuv420p      >> overlay
Info    overlay              >> -            yuv420p      yuv420p      >> 
 
Thanks.

Share this post


Link to post
Share on other sites
michalb

OK, ignore the previous assistance posts. It all started to work after I bought Premiere.

Cheers

Share this post


Link to post
Share on other sites
Risiamu
# arxher @ arxher-desktop in ~ [10:20:06]
$ sudo systemctl status emby-server
● emby-server.service - Emby Server is a personal media server with apps on just about every device.
   Loaded: loaded (/usr/lib/systemd/system/emby-server.service; enabled; vendor preset: enabled)
   Active: failed (Result: signal) since Mon 2020-08-31 10:19:16 CST; 57s ago
 Main PID: 18714 (code=killed, signal=ABRT)

8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.StartupWizard
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.StartupWizard. Duration:
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.SystemEvents
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.SystemEvents. Duration:
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier.
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.Channels.ChannelsEntryPoint
8月 31 10:19:16 arxher-desktop emby-server[18714]: Stack overflow.
8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Main process exited, code=killed, status=6/ABRT
8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Failed with result 'signal'.
...skipping...
● emby-server.service - Emby Server is a personal media server with apps on just about every device.
   Loaded: loaded (/usr/lib/systemd/system/emby-server.service; enabled; vendor preset: enabled)
   Active: failed (Result: signal) since Mon 2020-08-31 10:19:16 CST; 57s ago
 Main PID: 18714 (code=killed, signal=ABRT)

8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.StartupWizard
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.StartupWizard. Duration:
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.SystemEvents
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.SystemEvents. Duration:
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier.
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.Channels.ChannelsEntryPoint
8月 31 10:19:16 arxher-desktop emby-server[18714]: Stack overflow.
8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Main process exited, code=killed, status=6/ABRT
8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Failed with result 'signal'.

Meeting some stackoverflow problem. I am running this on Jetson Nano (ARMV8) Ubuntu 18.

It initialy works fine, but then i can't start it....

Share this post


Link to post
Share on other sites
Luke
On 8/30/2020 at 10:24 PM, Risiamu said:

# arxher @ arxher-desktop in ~ [10:20:06]
$ sudo systemctl status emby-server
● emby-server.service - Emby Server is a personal media server with apps on just about every device.
   Loaded: loaded (/usr/lib/systemd/system/emby-server.service; enabled; vendor preset: enabled)
   Active: failed (Result: signal) since Mon 2020-08-31 10:19:16 CST; 57s ago
 Main PID: 18714 (code=killed, signal=ABRT)

8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.StartupWizard
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.StartupWizard. Duration:
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.SystemEvents
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.SystemEvents. Duration:
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier.
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.Channels.ChannelsEntryPoint
8月 31 10:19:16 arxher-desktop emby-server[18714]: Stack overflow.
8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Main process exited, code=killed, status=6/ABRT
8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Failed with result 'signal'.
...skipping...
● emby-server.service - Emby Server is a personal media server with apps on just about every device.
   Loaded: loaded (/usr/lib/systemd/system/emby-server.service; enabled; vendor preset: enabled)
   Active: failed (Result: signal) since Mon 2020-08-31 10:19:16 CST; 57s ago
 Main PID: 18714 (code=killed, signal=ABRT)

8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.StartupWizard
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.StartupWizard. Duration:
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.SystemEvents
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.SystemEvents. Duration:
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier.
8月 31 10:19:16 arxher-desktop emby-server[18714]: Info App: Starting entry point Emby.Server.Implementations.Channels.ChannelsEntryPoint
8月 31 10:19:16 arxher-desktop emby-server[18714]: Stack overflow.
8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Main process exited, code=killed, status=6/ABRT
8月 31 10:19:16 arxher-desktop systemd[1]: emby-server.service: Failed with result 'signal'.

Meeting some stackoverflow problem. I am running this on Jetson Nano (ARMV8) Ubuntu 18.

It initialy works fine, but then i can't start it....

@Risiamu can you please try the beta server and see if this helps? Thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...