gino86 0 Posted January 8, 2023 Share Posted January 8, 2023 Hi all I have recently built a new NAS to replace my already quite aged Synology DS414. My new build runs TrueNAS Scale and Emby from the official TrueNAS charts catalog. A feature that I'd not want to miss out from the old NAS is the casting of music to my Yamaha RX-A2040 (runs on latest firmmare available 1.98) which currently works fine with DS Audio from Synology. The Yamaha only supports audio streaming, and no video/photo. I have now the problem that I cannot cast from the Emby server to the Yamaha directly, but I can browse the Emby library from the Yamaha on-screen UI or via the Yamaha app and stream music in those ways. When I try to cast e.g. an album to the Yamaha from Emby, the following things happen: The Yamaha UI shows song title etc. but no sound is audible Immediately after, the Yamaha UI shows an 'Access error' on the screen After ~10s Emby switches to the next song in the queue and the same happens again BTW, in the same network on the same router, I have an Xbox One X connected and streaming music to it works from the Emby app. I have attached some logs. Any idea what could be the cause of my issue or anybody managed to DLNA-cast to a Yamaha RX-Ax040 yet? Thanks Gino desc_ConnectionManager_RX2040.xml desc_RX2040.xml embyserver_RX2040.txt udhisapi_XBoxOne.xml Link to comment Share on other sites More sharing options...
gino86 0 Posted January 8, 2023 Author Share Posted January 8, 2023 Maybe it could be related to this and Emby is somehow sending in the wrong format? My library is all MP3 and Emby should not transcode (if it does...) Link to comment Share on other sites More sharing options...
gino86 0 Posted January 9, 2023 Author Share Posted January 9, 2023 Hi again When I read the following post and look at my log files, I can find the same 'Access token invalid or expired' errors where folks state that it worked for them on Emby 4.6 and stopped working from 4.7 owards. I cannot confirm that, because I started directly with 4.7.10 and then updated to 4.7.11. Another log attached below. Best Gino embyserver.txt Link to comment Share on other sites More sharing options...
almaster 2 Posted January 21, 2023 Share Posted January 21, 2023 Unfortunately I too found that emby's dlna server is completely buggy. Same problem with my Yamaha RX-V777 that just can't access emby via dlna control point app like HiFi-Cast (same access-error response). Unfortunately, as you may have noticed, I didn't get support to fix the problem; I had to resolve by eliminating the emby dlna plugin and use another dlna server software (kodi in my case), waiting to completely replace emby with another software when my emby premiere subscription ended. Link to comment Share on other sites More sharing options...
gino86 0 Posted January 23, 2023 Author Share Posted January 23, 2023 @Lukeany chance in having a look at this issue? I am seemingly not the only one with this problem. Link to comment Share on other sites More sharing options...
gino86 0 Posted February 12, 2023 Author Share Posted February 12, 2023 @Lukeany ideas yet? Link to comment Share on other sites More sharing options...
Luke 37019 Posted February 15, 2023 Share Posted February 15, 2023 @gino86 please try the Emby Dlna 1.0.93 plugin update and let me know if that helps. Thanks! Link to comment Share on other sites More sharing options...
gino86 0 Posted February 17, 2023 Author Share Posted February 17, 2023 Hi @Luke Thank you for the update. Unfortunately, I still seem to have the same problem. New log attached. Best Gino embyserver (5).txt Link to comment Share on other sites More sharing options...
Luke 37019 Posted February 18, 2023 Share Posted February 18, 2023 @gino86 can you please try this version of the dlna plugin? It will add more logging for me: Emby.Dlna.zip Just unzip it into /config/plugins, then restart the server, try again, and then provide the emby server log again. Thanks ! Link to comment Share on other sites More sharing options...
gino86 0 Posted February 26, 2023 Author Share Posted February 26, 2023 embyserver (5).txtHi @Luke I was on holidays. Here a new log. Do you think it worked with the logs? Best Gino Link to comment Share on other sites More sharing options...
gino86 0 Posted February 26, 2023 Author Share Posted February 26, 2023 I made another two log by also copying the DLL to /Emby/plugins directly embyserver (7).txt Link to comment Share on other sites More sharing options...
Luke 37019 Posted February 28, 2023 Share Posted February 28, 2023 Thanks. I've finally tracked down this issue and it will be resolved in the upcoming Emby Server 4.8 release. If you need immediate relief, the fix will be in the Emby Server beta channel later this week. Link to comment Share on other sites More sharing options...
Luke 37019 Posted March 24, 2023 Share Posted March 24, 2023 @gino86 Apologies for the delay. The new beta with the fix is currently rolling out. If you need immediate relief, please try it out and report your experience. Thanks ! Link to comment Share on other sites More sharing options...
Luke 37019 Posted December 27, 2023 Share Posted December 27, 2023 @gino86are you still seeing this with the latest versions? Link to comment Share on other sites More sharing options...
Luke 37019 Posted December 27, 2023 Share Posted December 27, 2023 @K1ng_Learare you able to browse and play a music file using the emby dlna server from your yamaha? Please make sure to temporarily enable the dlna server in emby server dlna settings. Thanks ! Link to comment Share on other sites More sharing options...
K1ng_Lear 184 Posted December 28, 2023 Share Posted December 28, 2023 13 hours ago, Luke said: @K1ng_Learare you able to browse and play a music file using the emby dlna server from your yamaha? Please make sure to temporarily enable the dlna server in emby server dlna settings. Thanks ! Hi Luke, I installed and activated the DLNA Plugin an tried to find EMBY from my Yamaha device. I couldn't find emby. To be honest, I didn't used any dlna streams for over 10 years and so I'm not longer into the thing overall, frankly spoken, maybe I'm too stupid Nothing else, I think, why I can't find emby, is that there is a firewall conflict between the vlan for iot devices, like the yamaha, and the rest. I opened UDP 1900 between this two networks but it didn't help. Oh, the usually emby ports are opened and working well with emby apps. I searched a while in the net, and it seems, that it's necessary, that the dlna sever and the client must be both in the same network. This isn't the case in my setup. To dig this out, it would been a work of several hours, because I've to reconfigure a lot of my networking and to be honest, I would prefer to avoid this. Sorry, that I couldn't help you. 1 Link to comment Share on other sites More sharing options...
Luke 37019 Posted March 6 Share Posted March 6 Hi, please try again with Emby Server 4.8.3+. Thanks ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now