Emby - Yann 4 Posted June 24, 2022 Share Posted June 24, 2022 Bonjour, Depuis plusieurs mises à jours l'application Emby transcode absolument tous mes fichiers vidéos. Ce que je n'ai pas l'impression qu'elle faisait avant. Je m'en suis aperçu en raison d'une baisse importante de la résolution et de la qualité de l'image. J'utilise un serveur Synology, branché par câble RJ45 Cat 6, à une Xiaomi Box, elle-même branchée à un projecteur. J'ai testé l'application VLC directement via ma box Xiaomi et j'ai une bien meilleure image avec VLC. Petit exemple d'un film en 1080p Emby transcode en 586p VLC en 800p Est-il possible que Emby sache lire de moins en moins de formats vidéo et qu'il soit donc obligé de tout transcoder ? En tout cas j'aimerais une explication, et mieux, une solution, s'il y a. Je vous remercie. Link to comment Share on other sites More sharing options...
GrimReaper 3226 Posted June 24, 2022 Share Posted June 24, 2022 (edited) Hey up, Do provide one of ffmpeg logs so reason for transcoding could be seen. Wild guess: you have a bandwidth limiter somewhere, either on server side or in client app. Edited June 24, 2022 by GrimReaper Link to comment Share on other sites More sharing options...
Emby - Yann 4 Posted June 24, 2022 Author Share Posted June 24, 2022 8 minutes ago, GrimReaper said: Hey up, Do provide one of ffmpeg logs so reason for transcoding could be seen. Wild guess: you have a bandwidth limiter somewhere, either on server side or in client app. Cela aide ? Link to comment Share on other sites More sharing options...
GrimReaper 3226 Posted June 24, 2022 Share Posted June 24, 2022 Nope, that's MediaInfo section, one (or few) ffmpeg-transcode logs would be preferred, you can either download them from Settings>Logs tab or pick them up directly from logs folder, your Dashboard would tell you the path. 1 Link to comment Share on other sites More sharing options...
Emby - Yann 4 Posted June 24, 2022 Author Share Posted June 24, 2022 6 minutes ago, GrimReaper said: Nope, that's MediaInfo section, one (or few) ffmpeg-transcode logs would be preferred, you can either download them from Settings>Logs tab or pick them up directly from logs folder, your Dashboard would tell you the path. Celui-ci par exemple, j'ai une image, mais pas de son. Par contre, je ne suis actuellement pas chez moi, donc c'est via internet que je regarde le film. ffmpeg-transcode-7988561c-370e-4bda-9527-de3f6f1447dc_1.txt Link to comment Share on other sites More sharing options...
GrimReaper 3226 Posted June 24, 2022 Share Posted June 24, 2022 (edited) TranscodeReasons=ContainerBitrateExceedsLimit In your client app, change Quality from Auto to some numerical value, higher up, i.e. 20-30-50 Mbps... (in above MediaInfo example, more than 12 Mbps, in this transcode example, more than 5 Mbps, as your current limit is set on 3 Mbps, which might be hard-coded fallback OR set by yourself in server Network and/or User settings:) Global Remote Bitrate Limit: 3,000,000 bps Edited June 24, 2022 by GrimReaper Link to comment Share on other sites More sharing options...
Emby - Yann 4 Posted June 24, 2022 Author Share Posted June 24, 2022 2 minutes ago, GrimReaper said: TranscodeReasons=ContainerBitrateExceedsLimit In your client app, change Quality from Auto to some numerical value, higher up, i.e. 20-30-50 Mbps... (in above example, more than 12 Mbps). Chez moi il est déjà au maximum. Je connais ce réglage. C'est la première chose que j'ai essayé. Ici, pour ce fichier, je n'ai pas du tout de son. ffmpeg-transcode-95eb46ef-a39b-489c-a655-9be36a74f825_1.txt Link to comment Share on other sites More sharing options...
Solution GrimReaper 3226 Posted June 24, 2022 Solution Share Posted June 24, 2022 And again, from the second log: TranscodeReasons=ContainerBitrateExceedsLimit Global Remote Bitrate Limit: 3,000,000 bps Check: 7 minutes ago, GrimReaper said: as your current limit is set on 3 Mbps, which might be hard-coded fallback OR set by yourself in server Network and/or User settings:) Settings>Network tab>Internet streaming bitrate limit and Settings>Users>edit any user>Internet streaming bitrate limit 1 Link to comment Share on other sites More sharing options...
Emby - Yann 4 Posted June 24, 2022 Author Share Posted June 24, 2022 8 minutes ago, GrimReaper said: And again, from the second log: TranscodeReasons=ContainerBitrateExceedsLimit Global Remote Bitrate Limit: 3,000,000 bps Check: Settings>Network tab>Internet streaming bitrate limit and Settings>Users>edit any user>Internet streaming bitrate limit Ok. Via internet c'est ok ! Merci ! Pour chez moi, qu'est ce qui peut poser soucis ? Je devrais être en "direct play", comme il est branché directement sur le serveur. Non ? Link to comment Share on other sites More sharing options...
GrimReaper 3226 Posted June 24, 2022 Share Posted June 24, 2022 I don't quite understand your question, you just said you're not at home, i.e. accesing remotely? 25 minutes ago, Emby - Yann said: je ne suis actuellement pas chez moi, donc c'est via internet que je regarde le film. I am currently not at home, so it is via the internet that I watch the film. Link to comment Share on other sites More sharing options...
Happy2Play 8139 Posted June 24, 2022 Share Posted June 24, 2022 3 minutes ago, Emby - Yann said: OK. Via the internet it's ok! Thank you! For me, what can be a problem? I should be in "direct play", as it is plugged directly into the server. No? Would need to see a server log but the ffmpeg log would appear this is not a local connection as WAN address is being used. Or we need another example of the issue you are having on a local connection. 1 Link to comment Share on other sites More sharing options...
Emby - Yann 4 Posted June 24, 2022 Author Share Posted June 24, 2022 1 minute ago, GrimReaper said: I don't quite understand your question, you just said you're not at home, i.e. accesing remotely? Pour l'instant, oui. Link to comment Share on other sites More sharing options...
Emby - Yann 4 Posted June 24, 2022 Author Share Posted June 24, 2022 1 minute ago, Happy2Play said: Would need to see a server log but the ffmpeg log would appear this is not a local connection as WAN address is being used. Or we need another example of the issue you are having on a local connection. Oui, en effet, je regarde actuellement d'ailleurs que chez moi. Je ferais le test une fois chez moi. Link to comment Share on other sites More sharing options...
Emby - Yann 4 Posted June 24, 2022 Author Share Posted June 24, 2022 J'ai contrôlé et cela semble ok. Cela plafonne au maximum. Je test d'autres films prochainement. Petite question hors Emby. Ma Xiaomi Box a un signal internet bloqué à 40-50Mbps. Savez-vous éventuellement pourquoi ? Elle est branchée en RJ45. Merci. Link to comment Share on other sites More sharing options...
Luke 36881 Posted June 28, 2022 Share Posted June 28, 2022 On 6/24/2022 at 5:30 PM, Emby - Yann said: J'ai contrôlé et cela semble ok. Cela plafonne au maximum. Je test d'autres films prochainement. Petite question hors Emby. Ma Xiaomi Box a un signal internet bloqué à 40-50Mbps. Savez-vous éventuellement pourquoi ? Elle est branchée en RJ45. Merci. Hi, why do you think it is stuck at 40-50 mbps? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now