JustEric78 23 Posted December 15, 2021 Share Posted December 15, 2021 7 minutes ago, ebr said: Hi. I'm seeing recent entries. What version of the server are you running? 4.6.7.0 I do see newer ones if I specifically go to that section as well, after turning it on to test however, it is only playing an intro from a local folder I provided to it and no trailer. Previously it would play the number of trailers I put in the settings followed by one of my intros. I have checked and validated the settings. Link to comment Share on other sites More sharing options...
Luke 37052 Posted December 15, 2021 Share Posted December 15, 2021 hi @JustEric78 please go over an example. thanks. Link to comment Share on other sites More sharing options...
JustEric78 23 Posted December 15, 2021 Author Share Posted December 15, 2021 Thanks for moving this Luke. I explained in the original post, but now that I have activated intros again it does not play any trailers. I do get the intro I saved locally, but there are no trailers that play before it like there used to. Link to comment Share on other sites More sharing options...
Luke 37052 Posted December 15, 2021 Share Posted December 15, 2021 Can you please go over an example? Thanks. Link to comment Share on other sites More sharing options...
JustEric78 23 Posted December 15, 2021 Author Share Posted December 15, 2021 2 minutes ago, Luke said: Can you please go over an example? Thanks. Sorry for not catching on to what you are looking for, but what do you mean by an example? I play a movie and the only thing that plays are my Dolby Atmos intros locally and then starts the movie. Link to comment Share on other sites More sharing options...
Luke 37052 Posted December 15, 2021 Share Posted December 15, 2021 I play a movie (such as) and the only thing that plays are (xxxx). Along with accompanying log file and details of what was played. Thanks. Link to comment Share on other sites More sharing options...
JustEric78 23 Posted December 17, 2021 Author Share Posted December 17, 2021 On 12/15/2021 at 3:40 PM, Luke said: I play a movie (such as) and the only thing that plays are (xxxx). Along with accompanying log file and details of what was played. Thanks. Okay, restarted the server just to validate how it would act, perhaps I needed to do that to turn trailers back on? They play now, but attached is the log, it still played a 2017 preview. I started file The Last Duel and it played Free Fire (2017) trailer then A Mouthful of Air (2021) so hit and miss. Also attached is a shot of the new and upcoming to blu-ray as well as Netflix which appears to be where this problem is stemming from as they are both all 2017 movies. I imagine whatever fix was applied to the new and upcoming in theaters needs to be applied to the other two sections? embyserver.txt Link to comment Share on other sites More sharing options...
JustEric78 23 Posted February 6, 2022 Author Share Posted February 6, 2022 Since I brought this up again on someone else's topic I figure I may as well revive this thread. This stopped working again shortly after this post, it does not play them now even after a fresh reboot of the server and client. It is not the end of the world I guess, but annoying problem when there is an option for it that I have setup properly. If new logs are needed I can post again, this problem though seems not to be high priority and that is understandable. Link to comment Share on other sites More sharing options...
Luke 37052 Posted February 7, 2022 Share Posted February 7, 2022 We'll take a look at it. Thanks for reporting. Link to comment Share on other sites More sharing options...
artv_lounge 0 Posted February 13, 2022 Share Posted February 13, 2022 is it possible to show a different trailer/intro for each different library? Link to comment Share on other sites More sharing options...
Luke 37052 Posted February 15, 2022 Share Posted February 15, 2022 On 2/13/2022 at 4:53 PM, artv_lounge said: is it possible to show a different trailer/intro for each different library? Hi, do you mean with Cinema Intros? Not per library, no, but you can make it per video or per tag using tags: https://support.emby.media/support/solutions/articles/44001848833-cinema-intros Link to comment Share on other sites More sharing options...
CassTG 98 Posted February 26, 2022 Share Posted February 26, 2022 (edited) For info, Vantage Point plugin which extended the functionality stopped working i believe in server beta .23 and .24 So i reinstalled Cinema Intros to see if that works and that is also not working in server beta .24 I have it set to trigger on specific tags. The folder is mapped in the settings to the correct folder containing the tag videos to be played. However on any device it just plays the movie without any preroll intro. `when i look in the logs there is zero mention of cinema intro being invoked, logs pretty much say user clicked play and movie has started. No reference at all to cinema intros in the logs I will get a log once the metadata refresh has finished Not working also in .25 .26 .28 @Luke Edited March 2, 2022 by CassTG 1 1 Link to comment Share on other sites More sharing options...
obwielnls 6 Posted March 8, 2022 Share Posted March 8, 2022 Sadly I decided to try out Emby because Plex has broken my pre-roll intros. I've spend most of the day on this and like you can't get them to play with either Cinema intros or Vantage point. ;( 1 Link to comment Share on other sites More sharing options...
JustEric78 23 Posted March 8, 2022 Author Share Posted March 8, 2022 1 minute ago, obwielnls said: Sadly I decided to try out Emby because Plex has broken my pre-roll intros. I've spend most of the day on this and like you can't get them to play with either Cinema intros or Vantage point. ;( The cinema intros part of it works for me without a problem, just not the trailers. Do you have the intros in a folder that is shared and what format are you entering the address into the Intro's section with if so? Link to comment Share on other sites More sharing options...
obwielnls 6 Posted March 8, 2022 Share Posted March 8, 2022 I do have a dedicated folder for pre-roll video. \\nas\driver\plex\PreRoll is how it's entered. My movies and tv shows are in a similar spot (\\nas\driver\plex\Movies) and seem to play fine so I"m sure the server can see them fine. 1 Link to comment Share on other sites More sharing options...
JustEric78 23 Posted March 8, 2022 Author Share Posted March 8, 2022 2 minutes ago, obwielnls said: I do have a dedicated folder for pre-roll video. \\nas\driver\plex\PreRoll is how it's entered. My movies and tv shows are in a similar spot (\\nas\driver\plex\Movies) and seem to play fine so I"m sure the server can see them fine. Okay, after you added that address did you run a new library scan? I assume you have seen this article and made sure you set it up in this manner, right? https://support.emby.media/support/solutions/articles/44001848833-cinema-intros Link to comment Share on other sites More sharing options...
obwielnls 6 Posted March 8, 2022 Share Posted March 8, 2022 I did read that and .. maybe here is the issue.. Does that folder have to be a library? The initial scan is still running.. It's grabbing over a thousand movies and a couple of thousand tv shows' metadata. 1 Link to comment Share on other sites More sharing options...
obwielnls 6 Posted March 8, 2022 Share Posted March 8, 2022 Also.. I don't really want a trailer. Really just 3 local files to play before each movie. 1 Link to comment Share on other sites More sharing options...
JustEric78 23 Posted March 8, 2022 Author Share Posted March 8, 2022 5 minutes ago, obwielnls said: I did read that and .. maybe here is the issue.. Does that folder have to be a library? The initial scan is still running.. It's grabbing over a thousand movies and a couple of thousand tv shows' metadata. No, I did not at least, I think it is more likely that the scan is still running and you will just need to be patient in letting it finish. Also on the other post where you just want it to play the three files, just to clarify it will just randomly pick one of the three and it does not play them all every time unless that is what you meant? Link to comment Share on other sites More sharing options...
obwielnls 6 Posted March 8, 2022 Share Posted March 8, 2022 I really want the three to play sequentially.. I even started to build the three together in Final Cut but it doesn't deal with Atmos so that's not going to work. It looked like I might be able to make it happen in Vantage point, make one a bump, then one a phone thing, etc. 1 Link to comment Share on other sites More sharing options...
JustEric78 23 Posted March 8, 2022 Author Share Posted March 8, 2022 1 minute ago, obwielnls said: I really want the three to play sequentially.. I even started to build the three together in Final Cut but it doesn't deal with Atmos so that's not going to work. It looked like I might be able to make it happen in Vantage point, make one a bump, then one a phone thing, etc. Combining them into a single file is the only way I can think of making it work. Feel free to hit me up in a PM if it does not work after the scan and I will send over a screenshot of my settings. Link to comment Share on other sites More sharing options...
obwielnls 6 Posted March 8, 2022 Share Posted March 8, 2022 Will do, thanks.. Hopefully the scan and metadata download will finish tonight. 1 Link to comment Share on other sites More sharing options...
obwielnls 6 Posted March 10, 2022 Share Posted March 10, 2022 The scan finished but I'm still not getting any preroll .. I"m on 4.6.7.0 Link to comment Share on other sites More sharing options...
JustEric78 23 Posted March 10, 2022 Author Share Posted March 10, 2022 7 minutes ago, obwielnls said: The scan finished but I'm still not getting any preroll .. I"m on 4.6.7.0 Sending you a screenshot of my settings Link to comment Share on other sites More sharing options...
obwielnls 6 Posted March 10, 2022 Share Posted March 10, 2022 For anyone else the solution here was to be sure Vantage point was uninstalled not just disabled. Seems that VP and Cinema trailers don't play well together at all. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now