Can't connect to Emby server remotely

[Tannhauser 0]

Hi

I know this question has been asked numerous times, but I have already read two Emby connection guides and some other forum posts regarding the same issue to no avail. My issue is simply that I can't connect to my Emby server remotely. I have followed these guides:

• https://support.emby.media/support/solutions/articles/44001849007-connectivity
• https://support.emby.media/support/solutions/articles/44002137137-remote-setup

Right now I'm stuck at the "traceroute" command, as I'm a bit unsure how to read the output:

traceroute to 8.8.8.8 (8.8.8.8), 30 hops max, 60 byte packets
 1  _gateway (192.168.1.1)  2.382 ms  3.843 ms  3.798 ms
 2  192.168.87.1 (192.168.87.1)  4.660 ms  4.830 ms  7.049 ms
 3  100.76.0.2 (100.76.0.2)  8.531 ms  8.489 ms  9.729 ms
 4  45.80.95.198 (45.80.95.198)  8.042 ms  8.280 ms  8.242 ms
 5  45.80.95.224 (45.80.95.224)  9.490 ms  9.499 ms  9.460 ms
 6  45.80.95.222 (45.80.95.222)  9.423 ms  5.053 ms  6.278 ms
 7  * * *
 8  89.184.134.238 (89.184.134.238)  16.229 ms 89.184.134.240 (89.184.134.240)  16.363 ms  16.335 ms
 9  89.184.134.79 (89.184.134.79)  16.305 ms  16.277 ms  17.424 ms
10  212.10.11.15 (212.10.11.15)  17.382 ms  17.344 ms  17.312 ms
11  108.170.252.65 (108.170.252.65)  21.002 ms 108.170.251.129 (108.170.251.129)  18.483 ms 108.170.252.65 (108.170.252.65)  19.554 ms
12  142.250.236.37 (142.250.236.37)  14.808 ms 142.250.209.243 (142.250.209.243)  14.825 ms 142.250.225.77 (142.250.225.77)  14.691 ms
13  dns.google (8.8.8.8)  14.650 ms  14.868 ms  15.202 ms

The site canyouseeme.org shows the correct IP (WAN) as is shown on my server dashboard. When entering the port 8096 or 8920 I get the message: "Error: I could not see your service. Reason: Connection timed out".

Here are my other settings:

Emby network settings

Allow remote connections to this Emby Server (checked)

Enable automatic port mapping (checked)

Router information and settings

NETGEAR Router

Turn UPnP On (checked)

Active	Protocol	Int. Port	Ext. Port	IP Address
YES	TCP	8096	8096	192.168.1.18
YES	TCP	8920	8920	192.168.1.18

Server information

Ubuntu 20.04.3 LTS

LAN-connection

[Q-Droid 640]

30 minutes ago, Tannhauser said:

 1  _gateway (192.168.1.1)  2.382 ms  3.843 ms  3.798 ms
 2  192.168.87.1 (192.168.87.1)  4.660 ms  4.830 ms  7.049 ms

The second hop is not a good sign. It looks like double NAT.

 

[Tannhauser 0]

Thanks for the reply. What does double NAT mean, and can I solve the problem in any way?

[Q-Droid 640]

It means that your private network and router (192.168.1.0) are behind another private network and router (192.168.87.0). More often than not because someone installs a personal router connected to an ISP router. Usually can be fixed by changing the provider's modem/router to bridge mode or configure DMZ.

In your case hop 3 is also a private network (100.76.0.0) so even if you fixed hop 2 your provider might be using CGNAT. If your provider can't give you a public IP address for your WAN connection then the solutions get more complex.