Jump to content

Escaneo automatico de bibiliotecas


Banquero
 Share

Go to solution Solved by cayars,

Recommended Posts

Banquero

Buenos dias, desde que he cambiado de DSM6 a DSM7, con la instalación del nuevo paquete para Emby Server 4.6.4.0 (DSM7), no consigo que cuando añado alguna pelicula, se añada automáticamente a Emby..Tengo picado el "monitoreo en tiempo real", pero tarda alrededor de 15 minutos en reconocer dicho cambio en la biblioteca...Alguna sugerencia? Muchas gracias...

Link to comment
Share on other sites

Hi, It's working but delayed?

Link to comment
Share on other sites

Banquero

Si, así es. Tarda mucho en identificar la película o serie, entre 15 o 20 minutos... 

Link to comment
Share on other sites

Do you know how to get to the config folder in SSH on DSM7?
If so take a look at system.xml in that folder.

There will be an entry like this
<LibraryMonitorDelay>60</LibraryMonitorDelay>

Does your say 60 or a different value?

BTW, the path should be
 

/volume1/@appdata/EmbyServer/config/system.xml

 

Link to comment
Share on other sites

Banquero

Buenos cayars, no me deja entrar...Te envío pantallazo...A ver si puedes ayudarme, porque estoy perdido...Gracias..

@cayars

image.thumb.png.340b42da7d3437e9f1226c1ea3ba6d44.png

Link to comment
Share on other sites

Banquero
13 hours ago, cayars said:

Do you know how to get to the config folder in SSH on DSM7?
If so take a look at system.xml in that folder.

There will be an entry like this
<LibraryMonitorDelay>60</LibraryMonitorDelay>

Does your say 60 or a different value?

BTW, the path should be
 


/volume1/@appdata/EmbyServer/config/system.xml

 

Buenos dias, Cayars, me Dice "Permiso denegado"..Debo de hacer algo en el NAS? Gracias...

 

image.thumb.png.669ccaa777bce0f33df385d9e0ce473b.png

 

Link to comment
Share on other sites

On 8/8/2021 at 6:04 AM, Banquero said:

Good morning, Cayars, It tells me "Permission denied" .. Should I do something on the NAS? Thanks...

 

image.thumb.png.669ccaa777bce0f33df385d9e0ce473b.png

 

Hi not sure what you're tryin to do in that screen shot but there is no command given.

Try changing to the directory and then list the files with

cd /volume1/@appdata/EmbyServer/config
ls -l

You should then see the system.xml file.

if you can see the file you should be able to copy it to a location that you have access to in File Station or a PC mounted to your NAS

You could do that with a command similar to this but you have to use a share name setup on your NAS

cp -rv /volume1/@appdata/EmbyServer/config/system.xml /volume1/ShareNameHere

 

Link to comment
Share on other sites

Banquero
On 8/7/2021 at 10:51 PM, cayars said:

Do you know how to get to the config folder in SSH on DSM7?
If so take a look at system.xml in that folder.

There will be an entry like this
<LibraryMonitorDelay>60</LibraryMonitorDelay>

Does your say 60 or a different value?

BTW, the path should be
 


/volume1/@appdata/EmbyServer/config/system.xml

 

Buenas noches. Efectivamente el valor que pone en system.xml es 60..

Link to comment
Share on other sites

OK so Emby Server should be responding to the inotify messages about 60 seconds after they happen.
Any other slowdown is likely going to be on the NAS side.

Link to comment
Share on other sites

Banquero
1 minute ago, cayars said:

OK so Emby Server should be responding to the inotify messages about 60 seconds after they happen.
Any other slowdown is likely going to be on the NAS side.

El NAS funciona perfectamente. Esto ha ocurrido desde la actualización a DSM 7... 

Link to comment
Share on other sites

What are the inotify setting on your DSM 7 setup?

Link to comment
Share on other sites

Banquero
5 hours ago, cayars said:

What are the inotify setting on your DSM 7 setup?

Te refieres a la configuración en Emby de las notificaciones, no? 

Link to comment
Share on other sites

inotify settings in Synology.

What do you get if you run the following command in SSH/Putty?

cat /proc/sys/fs/inotify/max_user_watches

Link to comment
Share on other sites

Banquero
2 hours ago, cayars said:

inotify settings in Synology.

What do you get if you run the following command in SSH/Putty?

cat /proc/sys/fs/inotify/max_user_watches

Buenas tardes, cayars...El resultado es 8192...Que significa?

Link to comment
Share on other sites

That means you have the default "out of box" inotify settings which most people need to change and raise much higher as the count of media files increases.

via Putty/SSH login and go root with sudo -i

You will then want to modify  /etc.defaults/sysctl.conf to include these two lines

sysctl fs.inotify.max_user_watches=204800
sysctl fs.inotify.max_user_instances=1000

You can then run

sudo sysctl -p /etc.defaults/sysctl.conf

which will reload those settings and increase your watches and user instances.

 

Link to comment
Share on other sites

Banquero
13 minutes ago, cayars said:

That means you have the default "out of box" inotify settings which most people need to change and raise much higher as the count of media files increases.

via Putty/SSH login and go root with sudo -i

You will then want to modify  /etc.defaults/sysctl.conf to include these two lines

sysctl fs.inotify.max_user_watches=204800
sysctl fs.inotify.max_user_instances=1000

You can then run

sudo sysctl -p /etc.defaults/sysctl.conf

which will reload those settings and increase your watches and user instances.

 

cayars, como voy exactamente a ese archivo de configuración...Cual es el camino exacto dentro de volume1?

 

Link to comment
Share on other sites

The path of the file is /etc.defaults/sysctl.conf

If you know how to edit files via SSH/Putty then that's fine otherwise copy that file to a share you have access to on Windows and then use notepad to edit the file adding the 2 lines.

Then just copy it back to /etc.defaults/sysctl.conf

and continue with the rest of the post.

Link to comment
Share on other sites

Banquero
19 hours ago, cayars said:

The path of the file is /etc.defaults/sysctl.conf

If you know how to edit files via SSH/Putty then that's fine otherwise copy that file to a share you have access to on Windows and then use notepad to edit the file adding the 2 lines.

Then just copy it back to /etc.defaults/sysctl.conf

and continue with the rest of the post.

Buenas tardes, cayars, ya he incluido las líneas en el fichero conf...Sin embargo cuando ejecuto la última línea que indicas en el post, me arroja esto...Es correcto, o estoy haciendo algo mal? Muchas gracias por tu ayuda...

image.thumb.png.4baf2d5a1507a9181b526010e09e217b.png

Link to comment
Share on other sites

Banquero

De todas maneras, sigue igual..De hecho, ya ni añade el contenido automaticamente a Emby...Tengo que reescanear la biblioteca en cuestión..No sé que puede ser, pero no consigo dar con el problema...

Link to comment
Share on other sites

Sorry, edit the file and add these 2 lines:
 

fs.inotify.max_user_watches = 204800
fs.inotify.max_user_instances = 1000

Sorry about that.

Link to comment
Share on other sites

Banquero
15 minutes ago, cayars said:

Sorry, edit the file and add these 2 lines:
 


fs.inotify.max_user_watches = 204800
fs.inotify.max_user_instances = 1000

Sorry about that.

Modificado el archivo y ejecutada la ultima instrucción del post, y nada, no funciona..Emby no reescanea automáticamente la biblioteca..Ya no sé que hacer...Que raro...

Link to comment
Share on other sites

  • Solution

Did you reboot your NAS after setting the startup file?

Link to comment
Share on other sites

Banquero
1 minute ago, cayars said:

Did you reboot your NAS after setting the startup file?

No cayars, eso no lo he hecho..he ejecutado la ultima instruccion, pero no he reiniciado..Ahora mismo no puedo reiniciar, pero en cuanto lo haga, reporto el resultado...Muchas gracias...

  • Like 1
Link to comment
Share on other sites

Banquero

Vaya, ha tardado un par de minutos más de lo habitual, pero ahora si que escanea automaticamente la biblioteca..Haré algunas pruebas más...Muchas gracias cayars, por tu impagable ayuda...Saludos..

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...