Search the Community

I'd like to have a possibility to have Emby display an unavailability page between certain times. So for example, if an admin wants to shutsdown their storage between midnight and 9am that Emby gives an unavailable page instead of having to shut down and start up Emby with a Windows Task which completely shuts down the Emby server. This could be expanded to having this per library so if a library aren't available, instead of an eternal spinning wheel when clicking on this, have an unavailable page

So I'm pretty much brand new to the media server thing, and hoping someone can jump start my feeble knowledge on the subject. I've got a netgear R6350, so I can't install the emby server side app on it, but it is capable of running NAS via USB. I'm looking to run emby client side from Roku TVs/boxes. Can I set up the server manually (via IP and port) or do you have to have both the client and server side communicating?

Hi, I looked all the way through the big Emby Theater thread and there's a couple of posts mentioning how to autostart Emby Theater on boot up of a Raspberry Pi. I've tried a couple of these methods and also some other methods found searching the internet but I'm not having any joy at the moment - does anyone have a preferably fool proof or best way to get this setup? I'm running the latest version (3.0.3). Close to trying the full Emby Pi image but I have a few other things already on the Pi that i'd have to re-add and configure again which I'd prefer not to. Thanks!

Hi, I know this would not be the correct forum, but I did not find any of the OMBI, so I apologize right away. I would like to get help on the "startup" of OMBI. We use OMBI at my school, but it stays on a computer that teachers use. And even asking, explaining, that when windows connect is only to minimize the program, they keep shutting it. Does anyone know if it is possible, make it start in the system tray (like utorrent, qbittorrent)? Thank you, thank you in advance

This just happened after not using EMC for a couple of days no changes have been made to the setup I am running server version 3.3.1.0 that was updated 3 days ago and latest version of EMC. Here are the first entries from the log and there are some strange entries for retries. I am not familiar with the IP address ending in 190 and also what is the Win 7 bug? 2018-03-31 00:21:29.0828,Debug,,=========System looking for assembly: System.Data.SQLite,, Version=1.0.88.0,, Culture=neutral,, PublicKeyToken=db937bc2d44ff139,1,Application 2018-03-31 00:21:29.0848,Info,,System.Data.SQLite,, Version=1.0.88.0,, Culture=neutral,, PublicKeyToken=db937bc2d44ff139 is being resolved to System.Data.SQLite,, Version=1.0.88.0,, Culture=neutral,, PublicKeyToken=db937bc2d44ff139,1,Application 2018-03-31 00:21:29.1338,Info,,==========Using new SQL Repo========,1,Application 2018-03-31 00:21:29.3638,Info,,Playstate initialization took 0.01 seconds.,1,Application 2018-03-31 00:21:29.4038,Info,,Successfully loaded fastload data for : C:\ProgramData\MediaBrowser-Classic\Cache\playstate MediaBrowser.Library.Entities.PlaybackStatus,13,Worker thread for FastLoadLoader 2018-03-31 00:21:29.4138,Info,,Using String Data from C:\ProgramData\MediaBrowser-Classic\Localization\strings-en.xml,1,Application 2018-03-31 00:21:29.4238,Info,,Total Kernel Init took 0.39 seconds.,1,Application 2018-03-31 00:21:29.4808,Info,,Finished validating : C:\ProgramData\MediaBrowser-Classic\Cache\playstate MediaBrowser.Library.Entities.PlaybackStatus,13,Worker thread for FastLoadLoader 2018-03-31 00:21:29.4808,Info,,Dictionary loading and validation took 0.12 seconds.,13,Worker thread for FastLoadLoader 2018-03-31 00:21:29.7198,Info,,Information DisplayText: Welcome to Emby for WMC,1,Application 2018-03-31 00:21:29.7438,Info,,Emby (version 3.0.307.0 ) Starting up.,1,Application 2018-03-31 00:21:29.7438,Info,,Startup parameters: ,1,Application 2018-03-31 00:21:29.7638,Debug,,Having to get media experience by reflection due to bug in Windows 7,1,Application 2018-03-31 00:21:29.7638,Debug,,GetMediaExperienceUsingReflection was unsuccessful,1,Application 2018-03-31 00:21:29.8938,Info,,Sending Http Get to http://192.168.1.190:8096/emby/System/Info/Public?format=Json,1,Application 2018-03-31 00:21:50.9538,Error,,Error getting response from http://192.168.1.190:8096/emby/System/Info/Public?format=Json ( Exception. Type=System.Net.WebException Msg=Unable to connect to the remote server Src=System Method=GetResponse Line=0 Col=0 [n] StackTrace= [n] at System.Net.HttpWebRequest.GetResponse() [n] at MediaBrowser.ApiInteraction.MbHttpClient.Get(String url) ),1,Application 2018-03-31 00:21:51.1938,Info,,Unable to connect to server at 192.168.1.190. Will retry...,1,Application 2018-03-31 00:21:52.6938,Info,,Sending Http Get to http://192.168.1.190:8096/emby/System/Info/Public?format=Json,1,Application 2018-03-31 00:22:13.7138,Error,,Error getting response from http://192.168.1.190:8096/emby/System/Info/Public?format=Json ( Exception. Type=System.Net.WebException Msg=Unable to connect to the remote server Src=System Method=GetResponse Line=0 Col=0 [n] StackTrace= [n] at System.Net.HttpWebRequest.GetResponse() [n] at MediaBrowser.ApiInteraction.MbHttpClient.Get(String url) ),1,Application 2018-03-31 00:22:13.7138,Info,,Unable to connect to server at 192.168.1.190. Will retry...,1,Application 2018-03-31 00:22:15.2138,Info,,Sending Http Get to http://192.168.1.190:8096/emby/System/Info/Public?format=Json,1,Application 2018-03-31 00:22:36.2538,Error,,Error getting response from http://192.168.1.190:8096/emby/System/Info/Public?format=Json ( Exception. Type=System.Net.WebException Msg=Unable to connect to the remote server Src=System Method=GetResponse Line=0 Col=0 [n] StackTrace= [n] at System.Net.HttpWebRequest.GetResponse() [n] at MediaBrowser.ApiInteraction.MbHttpClient.Get(String url) ),1,Application 2018-03-31 00:22:36.2538,Info,,Unable to connect to server at 192.168.1.190. Will retry...,1,Application 2018-03-31 00:22:37.7538,Warning,,Unable to connect to configured server 192.168.1.190:8096. Will try automatic detection,1,Application 2018-03-31 00:22:37.9738,Info,,Sending Http Get to http://192.168.1.31:8096/emby/System/Info/Public?format=Json,1,Application 2018-03-31 00:22:37.9838,Info,,Sending Http Get to http://192.168.1.31:8096/emby/Users/Public?isDisabled=False&format=Json,1,Application 2018-03-31 00:22:38.0738,Info,,Connected to server NUC-PC at http://192.168.1.31:8096,1,Application 2018-03-31 00:22:38.0738,Info,,Server version: 3.3.1.0,1,Application 2018-03-31 00:22:38.1338,Debug,,GoToPage: resx://MediaBrowser/MediaBrowser.Resources/SplashPage,1,Application 2018-03-31 00:22:38.2838,Info,,Application Init took 68.86 seconds.,1,Application 2018-03-31 00:22:38.2838,Info,,Information DisplayText: Welcome to Emby for WMC,1,Application

For the last few months, when i've started emby, which hasn't been often, as i've been otherwise busy, it's worked ok, but then chrome crashes. This then leaves chrome crashing immediately on startup... forever... even without emby running. The only way i've found to fix it is to delete the Default folder in my user profile's Chrome - User Data folder. This then means chrome starts from scratch, asking me to login again and sync everything. Not the end of the world, but a mighty pain in the arse. Since the first occurrence, i've clean-installed my laptop a few times. Chrome would have updated itself continuously. So i don't think it's a windows problem, and possibly not a chrome problem... unless there's something in my synced profile. If i run firefox, i can then access emby just fine, and it works as usual. Any ideas?

Hi, I am hoping this is the right place to ask. I am trying to install emby for the first time and facing some issues. I am using docker and ansible to get it working. Ansible script is pretty simple - name: Install Emby docker: name: emby image: emby/embyserver:latest state: reloaded pull: always privileged: yes restart_policy: always volumes: - "{{ appdata }}/emby/test:/config:rw" - "/tmp:/tmp:rw" - "{{ media }}:/media:ro" ports: - "8096:8096" #host:container - "8920:8920" env: APP_UID: 1050 APP_GID: 1050 APP_USER: "{{dockeruser}}" VERSION: latest The "APPDATA" folder is a CIFS mount on the remote NAS, the all required folders are created and dockeruser has access and permissions to write. bash-4.4# cd /config/ bash-4.4# ls -lah total 4.0K drwxrwxr-x 2 dockeruser dockeruser 0 Dec 26 2017 . drwxr-xr-x 41 root root 4.0K Dec 26 02:46 .. drwxrwxr-x 2 dockeruser dockeruser 0 Dec 26 2017 cache drwxrwxr-x 2 dockeruser dockeruser 0 Dec 26 2017 config drwxrwxr-x 2 dockeruser dockeruser 0 Dec 26 2017 data drwxrwxr-x 2 dockeruser dockeruser 0 Dec 26 2017 localization drwxrwxr-x 2 dockeruser dockeruser 0 Dec 26 2017 logs But I get an exception on startup of emby: 2017-12-26T02:46:45.103737485Z *** Error Report *** 2017-12-26T02:46:45.103745195Z Version: 3.2.60.0 2017-12-26T02:46:45.103749733Z Command line: /usr/lib/emby-server/bin/MediaBrowser.Server.Mono.exe -programdata /config -restartpath /usr/lib/emby-server/restart.sh 2017-12-26T02:46:45.103755378Z Operating system: Unix 3.16.0.4 2017-12-26T02:46:45.103759083Z 64-Bit OS: True 2017-12-26T02:46:45.103762662Z 64-Bit Process: True 2017-12-26T02:46:45.103766230Z User Interactive: False 2017-12-26T02:46:45.103770132Z Mono: 4.8.1 (Stable 4.8.1.0/22a39d7 Sun Oct 1 17:55:43 UTC 2017) 2017-12-26T02:46:45.103775094Z Processor count: 2 2017-12-26T02:46:45.103779418Z Program data path: /config 2017-12-26T02:46:45.103783731Z Application directory: /usr/lib/emby-server/bin 2017-12-26T02:46:45.103787682Z System.AggregateException: One or more errors occurred. ---> SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. 2017-12-26T02:46:45.103793143Z at SQLitePCL.pretty.SQLiteException.CheckOk (SQLitePCL.sqlite3 db, System.Int32 rc) [0x0001a] in <926d5dc8f35f4aae9a6008f11f233fd0>:0 2017-12-26T02:46:45.103797254Z at SQLitePCL.pretty.SQLiteException.CheckOk (SQLitePCL.sqlite3_stmt stmt, System.Int32 rc) [0x00006] in <926d5dc8f35f4aae9a6008f11f233fd0>:0 2017-12-26T02:46:45.103801365Z at SQLitePCL.pretty.StatementImpl.MoveNext () [0x00056] in <926d5dc8f35f4aae9a6008f11f233fd0>:0 2017-12-26T02:46:45.103805152Z at SQLitePCL.pretty.DatabaseConnection.ExecuteAll (SQLitePCL.pretty.IDatabaseConnection This, System.String sql) [0x0001d] in <926d5dc8f35f4aae9a6008f11f233fd0>:0 2017-12-26T02:46:45.103811208Z at Emby.Server.Implementations.Data.ManagedConnection.ExecuteAll (System.String sql) [0x00000] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.103815564Z at Emby.Server.Implementations.Data.BaseSqliteRepository.RunDefaultInitialization (Emby.Server.Implementations.Data.ManagedConnection db) [0x00079] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.103819573Z at Emby.Server.Implementations.Data.SqliteUserRepository.Initialize () [0x00008] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.103823603Z at Emby.Server.Implementations.ApplicationHost.GetUserRepository () [0x00027] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.103827786Z at Emby.Server.Implementations.ApplicationHost+<RegisterResources>d__308.MoveNext () [0x005ce] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.103831952Z --- End of stack trace from previous location where exception was thrown --- 2017-12-26T02:46:45.103873899Z at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () [0x0000c] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.103898654Z at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess (System.Threading.Tasks.Task task) [0x0004e] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.104062434Z at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification (System.Threading.Tasks.Task task) [0x0002e] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.104067354Z at System.Runtime.CompilerServices.TaskAwaiter.ValidateEnd (System.Threading.Tasks.Task task) [0x0000b] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.104071357Z at System.Runtime.CompilerServices.ConfiguredTaskAwaitable+ConfiguredTaskAwaiter.GetResult () [0x00000] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.104075767Z at Emby.Server.Implementations.ApplicationHost+<Init>d__303.MoveNext () [0x0024c] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.104202780Z --- End of inner exception stack trace --- 2017-12-26T02:46:45.104461756Z at System.Threading.Tasks.Task.WaitAll (System.Threading.Tasks.Task[] tasks, System.Int32 millisecondsTimeout, System.Threading.CancellationToken cancellationToken) [0x00242] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.104468762Z at System.Threading.Tasks.Task.WaitAll (System.Threading.Tasks.Task[] tasks, System.Int32 millisecondsTimeout) [0x00000] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.104472933Z at System.Threading.Tasks.Task.WaitAll (System.Threading.Tasks.Task[] tasks) [0x00000] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.104477195Z at MediaBrowser.Server.Mono.MainClass.RunApplication (Emby.Server.Implementations.ServerApplicationPaths appPaths, MediaBrowser.Model.Logging.ILogManager logManager, Emby.Server.Implementations.StartupOptions options) [0x000d4] in <ce6ca2d6e906484ab100b2c0b72cc4b9>:0 2017-12-26T02:46:45.104481691Z at MediaBrowser.Server.Mono.MainClass.Main (System.String[] args) [0x00085] in <ce6ca2d6e906484ab100b2c0b72cc4b9>:0 2017-12-26T02:46:45.104723594Z ---> (Inner Exception #0) Busy: database is locked 2017-12-26T02:46:45.104743338Z SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. 2017-12-26T02:46:45.104748462Z at SQLitePCL.pretty.SQLiteException.CheckOk (SQLitePCL.sqlite3 db, System.Int32 rc) [0x0001a] in <926d5dc8f35f4aae9a6008f11f233fd0>:0 2017-12-26T02:46:45.104758565Z at SQLitePCL.pretty.SQLiteException.CheckOk (SQLitePCL.sqlite3_stmt stmt, System.Int32 rc) [0x00006] in <926d5dc8f35f4aae9a6008f11f233fd0>:0 2017-12-26T02:46:45.104763157Z at SQLitePCL.pretty.StatementImpl.MoveNext () [0x00056] in <926d5dc8f35f4aae9a6008f11f233fd0>:0 2017-12-26T02:46:45.104766973Z at SQLitePCL.pretty.DatabaseConnection.ExecuteAll (SQLitePCL.pretty.IDatabaseConnection This, System.String sql) [0x0001d] in <926d5dc8f35f4aae9a6008f11f233fd0>:0 2017-12-26T02:46:45.104770851Z at Emby.Server.Implementations.Data.ManagedConnection.ExecuteAll (System.String sql) [0x00000] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.104774649Z at Emby.Server.Implementations.Data.BaseSqliteRepository.RunDefaultInitialization (Emby.Server.Implementations.Data.ManagedConnection db) [0x00079] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.104795683Z at Emby.Server.Implementations.Data.SqliteUserRepository.Initialize () [0x00008] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.104801831Z at Emby.Server.Implementations.ApplicationHost.GetUserRepository () [0x00027] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.104805745Z at Emby.Server.Implementations.ApplicationHost+<RegisterResources>d__308.MoveNext () [0x005ce] in <a12a7c6217e143eaa39430af322cb07e>:0 2017-12-26T02:46:45.104809863Z --- End of stack trace from previous location where exception was thrown --- 2017-12-26T02:46:45.104814200Z at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () [0x0000c] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.104819577Z at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess (System.Threading.Tasks.Task task) [0x0004e] in <dbb16e0bacdc4a0f87478e401bc29b6c>:0 2017-12-26T02:46:45.104823695Z at System.Runtime.CompilerServices.TaskAwaiter. If I don't mount the location of the emby APPDATA (where I want to store DB files etc...) then emby seems to start. but this isn't ideal at all I don't want to keep this data in the VM or in Docker. Please help. server-63649853436.txt unhandled_f3903ef0-3e41-4099-954d-13d897bd6838.txt

About 20 minutes ago noticed that emby-server is not running, restarting the server makes it appear "active" using service status, but it crashes immediately after that. I've been running Emby on Zesty (4.10.0-20-generic x86_64) for about 3 weeks now, had no issues before, so I'm not sure what caused this. sudo service emby-server status shows this Б≈▐ emby-server.service - Emby Media Server Loaded: loaded (/lib/systemd/system/emby-server.service; enabled; vendor preset: enabled) Active: inactive (dead) since Tue 2017-05-16 21:30:34 MSK; 9min ago Process: 10617 ExecStopPost=/usr/bin/emby-server clear (code=exited, status=0/SUCCESS) Process: 10571 ExecStart=/usr/bin/emby-server start (code=exited, status=0/SUCCESS) Main PID: 10571 (code=exited, status=0/SUCCESS) п╪п╟п╧ 16 21:30:31 HTPC systemd[1]: Started Emby Media Server. п╪п╟п╧ 16 21:30:31 HTPC su[10571]: Successful su for emby by root п╪п╟п╧ 16 21:30:31 HTPC su[10571]: + ??? root:emby п╪п╟п╧ 16 21:30:31 HTPC su[10571]: pam_unix(su:session): session opened for user emby by (uid=0) I attached the log from /var/lib/emby-server/logs. Thanks in advance! log.txt

https://github.com/MediaBrowser/Emby/issues/2574 When I install `emby-server`, `emby-server-beta`, or `emby-server-dev` under Ubuntu 16.10 using `deb http://download.opensuse.org/repositories/home:/emby/xUbuntu_16.10/ /`, I get the following error when starting the service: Apr 10 12:36:41 media-server emby-server[15531]: System.TypeInitializationException: The type initializer for 'NLog.Common.InternalLogger' threw an exception. ---> System.Configuration.ConfigurationErrorsException: Error Initializing the configuration system. ---> System.Configuration.ConfigurationErrorsException: Unrecognized configuration section <appSettings> (/usr/lib/emby-server/bin/MediaBrowser.Server.Mono.exe.config line 9) Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ConfigInfo.ThrowException (System.String text, System.Xml.XmlReader reader) [0x00007] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.SectionGroupInfo.ReadContent (System.Xml.XmlReader reader, System.Configuration.Configuration config, System.Boolean overrideAllowed, System.Boolean root) [0x00170] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.SectionGroupInfo.ReadRootData (System.Xml.XmlReader reader, System.Configuration.Configuration config, System.Boolean overrideAllowed) [0x00007] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.Configuration.ReadConfigFile (System.Xml.XmlReader reader, System.String fileName) [0x000ec] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.Configuration.Load () [0x00052] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.Configuration.Init (System.Configuration.Internal.IConfigSystem system, System.String configPath, System.Configuration.Configuration parent) [0x00065] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.Configuration..ctor (System.Configuration.InternalConfigurationSystem system, System.String locationSubPath) [0x0005c] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.InternalConfigurationFactory.Create (System.Type typeConfigHost, System.Object[] hostInitConfigurationParams) [0x0000e] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ConfigurationManager.OpenExeConfigurationInternal (System.Configuration.ConfigurationUserLevel userLevel, System.Reflection.Assembly calling_assembly, System.String exePath) [0x00107] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ClientConfigurationSystem.get_Configuration () [0x00011] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: --- End of inner exception stack trace --- Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ClientConfigurationSystem.get_Configuration () [0x00030] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection (System.String configKey) [0x00000] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ConfigurationManager.GetSection (System.String sectionName) [0x00005] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ConfigurationManager.get_AppSettings () [0x00000] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Common.InternalLogger.GetSettingString (System.String configName, System.String envName) [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Common.InternalLogger.GetSetting[T] (System.String configName, System.String envName, T defaultValue) [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Common.InternalLogger.Reset () [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Common.InternalLogger..cctor () [0x00010] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: --- End of inner exception stack trace --- Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Config.LoggingConfiguration.Dump () [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.LogFactory.set_Configuration (NLog.Config.LoggingConfiguration value) [0x0006f] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.LogManager.set_Configuration (NLog.Config.LoggingConfiguration value) [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at Emby.Common.Implementations.Logging.NlogManager..ctor (System.String logDirectory, System.String logFileNamePrefix) [0x00043] in <3f2b57224a3e41debfce9f9a4ec723c4>:0 Apr 10 12:36:41 media-server emby-server[15531]: at MediaBrowser.Server.Mono.MainClass.Main (System.String[] args) [0x00044] in <dd98a272d3c7417dab6b45c61dfc5a8f>:0 Apr 10 12:36:41 media-server emby-server[15531]: [ERROR] FATAL UNHANDLED EXCEPTION: System.TypeInitializationException: The type initializer for 'NLog.Common.InternalLogger' threw an exception. ---> System.Configuration.ConfigurationErrorsException: Error Initializing the configuration system. ---> System.Configuration.ConfigurationErrorsException: Unrecognized configuration section <appSettings> (/usr/lib/emby-server/bin/MediaBrowser.Server.Mono.exe.config line 9) Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ConfigInfo.ThrowException (System.String text, System.Xml.XmlReader reader) [0x00007] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.SectionGroupInfo.ReadContent (System.Xml.XmlReader reader, System.Configuration.Configuration config, System.Boolean overrideAllowed, System.Boolean root) [0x00170] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.SectionGroupInfo.ReadRootData (System.Xml.XmlReader reader, System.Configuration.Configuration config, System.Boolean overrideAllowed) [0x00007] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.Configuration.ReadConfigFile (System.Xml.XmlReader reader, System.String fileName) [0x000ec] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.Configuration.Load () [0x00052] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.Configuration.Init (System.Configuration.Internal.IConfigSystem system, System.String configPath, System.Configuration.Configuration parent) [0x00065] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.Configuration..ctor (System.Configuration.InternalConfigurationSystem system, System.String locationSubPath) [0x0005c] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server systemd[1]: emby-server.service: Main process exited, code=exited, status=1/FAILURE Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.InternalConfigurationFactory.Create (System.Type typeConfigHost, System.Object[] hostInitConfigurationParams) [0x0000e] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ConfigurationManager.OpenExeConfigurationInternal (System.Configuration.ConfigurationUserLevel userLevel, System.Reflection.Assembly calling_assembly, System.String exePath) [0x00107] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ClientConfigurationSystem.get_Configuration () [0x00011] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: --- End of inner exception stack trace --- Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ClientConfigurationSystem.get_Configuration () [0x00030] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection (System.String configKey) [0x00000] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ConfigurationManager.GetSection (System.String sectionName) [0x00005] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at System.Configuration.ConfigurationManager.get_AppSettings () [0x00000] in <d6de850e07274db588ca7c247bfa5ec6>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Common.InternalLogger.GetSettingString (System.String configName, System.String envName) [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Common.InternalLogger.GetSetting[T] (System.String configName, System.String envName, T defaultValue) [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Common.InternalLogger.Reset () [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Common.InternalLogger..cctor () [0x00010] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: --- End of inner exception stack trace --- Apr 10 12:36:41 media-server emby-server[15531]: at NLog.Config.LoggingConfiguration.Dump () [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.LogFactory.set_Configuration (NLog.Config.LoggingConfiguration value) [0x0006f] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at NLog.LogManager.set_Configuration (NLog.Config.LoggingConfiguration value) [0x00000] in <8ea00faa812d4bf999fe44a51e324269>:0 Apr 10 12:36:41 media-server emby-server[15531]: at Emby.Common.Implementations.Logging.NlogManager..ctor (System.String logDirectory, System.String logFileNamePrefix) [0x00043] in <3f2b57224a3e41debfce9f9a4ec723c4>:0 Apr 10 12:36:41 media-server emby-server[15531]: at MediaBrowser.Server.Mono.MainClass.Main (System.String[] args) [0x00044] in <dd98a272d3c7417dab6b45c61dfc5a8f>:0

I have had LiveTV working for a while, but after a recent crash, the ServerWMC plugin did not show as installed anymore. Taking the opportunity to install the latest ServerWMC update (had to install manually since auto update was not working) I then installed the plugin in Emby and restarted. When it restarted it began to set each of my three tuners (HDHR Prime) to active. WMC was not showing the tuners were active, but could not open Live TV because there were no tuners available. ServerWMC showed the tuners as busy, but I could not get them to release from there. I had to restart my HDHR to get them to release. However, now every time Emby restarts the same thing happens. I looked through the Emby logs but couldn't see anything that showed an error during startup. This line repeated twice, but I don't know if that means anything: 2016-10-01 10:53:33.7352 Info App: Entry point completed: MediaBrowser.Server.Implementations.LiveTv.TunerHosts.SatIp.SatIpDiscovery. Duration: 0 seconds Any ideas what is going on? Other than the issues with startup, everything else appears to be working correctly. I did an uninstall/reinstall of the ServerWMC plugin to see if that would fix it, but it still occupies all the available tuners on startup, one by one.

Hello everyone, I seem to have 2 emby processes running, one is running as root (dont want) with the correct MONO_THREADS_PER_CPU and MONO_GC_PARAMS arguments, and one running as emby user (all good) without these arguments. ps auxZ | grep emby root 784 0.0 0.0 46360 3224 ? Ss 12:59 0:00 su -s /bin/sh -c exec "$0" "$@" emby -- env MONO_THREADS_PER_CPU=250 MONO_GC_PARAMS=nursery-size=128m /usr/bin/mono-sgen --optimize=all /usr/lib/emby-server/bin/MediaBrowser.Server.Mono.exe -programdata /var/lib/emby-server -ffmpeg /usr/bin/ffmpeg -ffprobe /usr/bin/ffprobe -restartpath /usr/lib/emby-server/restart.sh emby 894 2.5 4.5 1452236 370664 ? Ssl 12:59 1:43 /usr/bin/mono-sgen --optimize=all /usr/lib/emby-server/bin/MediaBrowser.Server.Mono.exe -programdata /var/lib/emby-server -ffmpeg /usr/bin/ffmpeg -ffprobe /usr/bin/ffprobe -restartpath /usr/lib/emby-server/restart.sh Is having 2 processes normal? why is one running as root? And lastly, how do I fix this if it is indeed abnormal? How do I get 1 process with the cirrect arguments running as emby user? nano /etc/systemd/system/multi-user.target.wants/emby-server.service [Unit]Description=Emby Media Server After=network.target [Service] EnvironmentFile=/etc/emby-server.conf ExecStart=/usr/bin/emby-server start Restart=on-abort TimeoutSec=20 ExecStopPost=/usr/bin/emby-server clear [Install] WantedBy=multi-user.target nano /etc/init.d/emby-server !/bin/sh### BEGIN INIT INFO # Provides: emby-server # Required-Start: $remote_fs $local_fs $network # Required-Stop: $remote_fs $local_fs $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: starts instance of Emby # Description: starts instance of Emby ### END INIT INFO # chkconfig: 2345 20 80 #The above indicates that the script should be started in levels 2, 3, 4, and 5, #that its start priority should be $ # Load the VERBOSE setting and other rcS variables . /lib/init/vars.sh # Define LSB log_* functions. # Depend on lsb-base (>= 3.0-6) to ensure that this file is present. . /lib/lsb/init-functions NAME=emby-server CONF_FILE=/etc/${NAME}.conf DEFAULT_FILE=/etc/default/${NAME} # Source Emby server default configuration . $DEFAULT_FILE # Source Emby server user configuration overrides if [ -f $CONF_FILE ]; then . $CONF_FILE else echo "${CONF_FILE} not found using default settings."; fi # Path of emby binary EMBYSERVER=/usr/bin/emby-server PIDFILE=${EMBY_PIDFILE-/var/run/emby-server.pid} case "$1" in start) log_daemon_msg "Starting $NAME daemon" if [ -s $PIDFILE ] && kill -0 $(cat $PIDFILE) >/dev/null 2>&1; then log_daemon_msg "apparently already running" log_end_msg 0 exit 0 fi exec $EMBYSERVER start & sleep 2 if [ -s $PIDFILE ] && kill -0 $(cat $PIDFILE) >/dev/null 2>&1; then log_end_msg 0 else log_end_msg 1 fi stop) log_daemon_msg "Stopping $NAME daemon" if [ ! -s $PIDFILE ] || ! kill -0 $(cat $PIDFILE) >/dev/null 2>&1; then [ -e $PIDFILE ] && rm -rf $PIDFILE log_success_msg "apparently already stopped" log_end_msg 0 exit 0 fi PID=`cat $PIDFILE` CPIDS=$(pgrep -P $PID) sleep 2 && kill -KILL $CPIDS kill -TERM $CPIDS > /dev/null 2>&1 sleep 2 if ! kill -0 $PID > /dev/null 2>&1; then rm -rf $PIDFILE log_end_msg 0 else log_end_msg 1 fi ;; status) status_of_proc -p $PIDFILE "$EMBYSERVER" "$NAME" exit $? # notreached due to set -e ;; restart|force-reload) $0 stop || exit $? $0 start || exit $? ;; *) echo "Usage: /etc/init.d/emby-server {start|stop|status|restart|force-reload}" >&2 exit 3 ;; esac Thanks

Emby will not start. This is a Windows 10 x64 instal. Previous version was running Ok - unfortunely I do not know the version number. Attached are install and server logs. Any help would be of great use. server-63590902400.txt server-install.log

There's an option in Emby WMC for it to check for updates on startup which is only supposed to run for admin accounts. But, for the last few weeks the "Update Now?" message has been appearing for non-admin accounts as well.

Hey there so I decided I would get Media Browser not too long ago and so far it has been great when I can get WMC to work. The problem I am having right now seems simple to fix but so far it has resulted in me wasting over 3 or 4 hours to try and get the server to start on PC startup w/o logging in. Apparently this is difficult to accomplish and I really cannot understand why. I have disabled the startup on the dashboard and I don't have any startup tasks in task scheduler for the application or service turned on so I am stumped. Currently I have the service set to Automatic and I also tried Automatic (delayed start). Logon is set up as this account which has administrator priveleges and I also tried Local System Account. I also have recovery setup to restart the service each time it cannot start but that does nothing. I even added some dependencies to the service: Media Center Extender Service[Mcx2Svc], Network List Service[netprofm], and the default Server[LanmanServer} service. Some other things I tried were creating a task in task scheduler to run the actual application. I also tried running a bat/cmd file with the lines START "" "C:\Users\*******\AppData\Roaming\MediaBrowser-Server\System\MediaBrowser.ServerApplication.exe" I also tried running the script in gpedit.msc under Local Computer Policy > Windows Settings > Scripts (Startup/Shutdown) > Startup . I attempted to save it as a BAT file and a CMD file but both do nothing. Maybe I need to add more dependencies (if so what?) ? Anyways as you can tell I have exhausted google searching and forum searching so any help would be very appreciated! Thanks!

Hello, my MediaBrowserServer is no longer starting and gives the following error: One or more errors occurred System.AggregateException at System.Threading.Tasks.Task.WaitAll (System.Threading.Tasks.Task[] tasks, Int32 millisecondsTimeout, CancellationToken cancellationToken) [0x00000] in <filename unknown>:0 at System.Threading.Tasks.Task.WaitAll (System.Threading.Tasks.Task[] tasks) [0x00000] in <filename unknown>:0 at MediaBrowser.Server.Mono.MainClass.RunApplication (MediaBrowser.Server.Implementations.ServerApplicationPaths appPaths, ILogManager logManager, MediaBrowser.Server.Startup.Common.StartupOptions options) [0x00000] in <filename unknown>:0 at MediaBrowser.Server.Mono.MainClass.Main (System.String[] args) [0x00000] in <filename unknown>:0 InnerException: System.DllNotFoundException libsqlite3.so.0 libsqlite3.so.0 at (wrapper managed-to-native) System.Data.SQLite.UnsafeNativeMethods:sqlite3_libversion () at System.Data.SQLite.SQLite3.get_SQLiteVersion () [0x00000] in <filename unknown>:0 at System.Data.SQLite.SQLiteConnection.get_SQLiteVersion () [0x00000] in <filename unknown>:0 at MediaBrowser.Server.Implementations.Persistence.SqliteExtensions+<ConnectToDb>c__async0.MoveNext () [0x00000] in <filename unknown>:0 --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () [0x00000] in <filename unknown>:0 at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1+ConfiguredTaskAwaiter[System.Data.IDbConnection].GetResult () [0x00000] in <filename unknown>:0 at MediaBrowser.Server.Implementations.Persistence.SqliteUserRepository+<Initialize>c__async0.MoveNext () [0x00000] in <filename unknown>:0 --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () [0x00000] in <filename unknown>:0 at System.Runtime.CompilerServices.ConfiguredTaskAwaitable+ConfiguredTaskAwaiter.GetResult () [0x00000] in <filename unknown>:0 at MediaBrowser.Server.Startup.Common.ApplicationHost+<GetUserRepository>c__async4.MoveNext () [0x00000] in <filename unknown>:0 --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () [0x00000] in <filename unknown>:0 at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1+ConfiguredTaskAwaiter[MediaBrowser.Controller.Persistence.IUserRepository].GetResult () [0x00000] in <filename unknown>:0 at MediaBrowser.Server.Startup.Common.ApplicationHost+<RegisterResources>c__async2.MoveNext () [0x00000] in <filename unknown>:0 --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () [0x00000] in <filename unknown>:0 at System.Runtime.CompilerServices.ConfiguredTaskAwaitable+ConfiguredTaskAwaiter.GetResult () [0x00000] in <filename unknown>:0 at MediaBrowser.Common.Implementations.BaseApplicationHost`1+<Init>c__async0[MediaBrowser.Server.Implementations.ServerApplicationPaths].MoveNext () [0x00000] in <filename unknown>:0 --- End of stack trace from previous location where exception was thrown --- at System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw () [0x00000] in <filename unknown>:0 at System.Runtime.CompilerServices.ConfiguredTaskAwaitable+ConfiguredTaskAwaiter.GetResult () [0x00000] in <filename unknown>:0 at MediaBrowser.Server.Startup.Common.ApplicationHost+<Init>c__async1.MoveNext () [0x00000] in <filename unknown>:0 From what I can see, it does not see the sqlite lib. I use MediaBrowserServer-dev on a centos7 and use the repository from MediaBrowser. To make sure, I verified if sqlite is installed correctly: yum list sqlite sqlite.x86_64 3.8.2-2.1 @MediaBrowserServer-Dependancies so it is installed. Let's see if the files that it is unable to find are there: find / -name libsqlite3.so.0 /usr/lib64/libsqlite3.so.0 so the file does exist. Where is MediaBrowserServer looking for the file? Or what is going wrong?

Hi everybody, Been trying MBClassic/ MB3 server for the first time. On the whole its fantastic, but there's one thing that's anoying to me. Being in WMCE, I often go in and out of MB looking for something to watch, and everytime I go back to MBClassic, appears the splash screen that keeps me waiting some seconds before seeing the same library again. Looks like MBClassic were disconnected and connected again with the Server each time I get out and in. There were also a delay with MB2 and I got used to it, but it's longer now with MB3, and I really don't like the splash screen appearing every time. First: Is there some way to avoid the splash screen? Second: Some way to speed up MBC restart? Maybe forcing MBC to keep connected to the server, so the delay only appears the first time? Thanks in advance

Hi, Yesterday I finally made the step to go from MB 2.x to MB3 :-) After some issues with the MB server, (had to set the rights of the MB server in the 'startup' folder to administrator) it runs pretty good and faster than 2.x. (The MB server as well the MB classic are running on the same PC which I use as mediacenter.) Just two questions: In MB 2.x. it was possible to start up in MB automatically after the PC was turned on. I can not find that option anymore in MB3. Of course I can automatically start up MCE and go to MB3, but I prefer to have the MB3 classic screen immediately. Is it still possible? I also noticed that after I switched on my system and it starts with MCE, I can't open MB Classic because it can not find the server! I double checked this but the server seems to be running and after some few attempts it is found. Is this a known feature? Thanks for your help and the good work! Regards, Johan