Search the Community

Hi All, I'm trying to setup a Raspberry pi with a touch screen (HDMI & USB, Waveshare 15,6") for kid entertainment in my car. I'm all good on emby server and Emby Theater app, but I can't figure out why my touchscreen events stop while playing videos... I get events (and the touchscreen works) while browsing the menus etc. but as soon as I play a video, the touchscreen stops responding. As soon as i press esc to exit the video, the touchscreen is working again. This is true when running the emby theater linux app, and also when watching through a browser (chromium). I know this is not directly an Emby issue, as the same issue exists on youtube.com I verify the input events from the touchscreen using this command (I'm remote accessing though ssh) DISPLAY=:0 libinput debug-events & here's the event log: event5 TOUCH_FRAME +128.019s event5 TOUCH_MOTION +128.032s 0 (0) 84.77/67.79 (262.08/118.16mm) event5 TOUCH_MOTION +1803.834s 0 (0) 84.77/67.79 (262.08/118.16mm) event5 TOUCH_FRAME +128.032s event5 TOUCH_FRAME +1803.834s event5 TOUCH_UP +128.048s 0 (0) event5 TOUCH_UP +1803.850s 0 (0) event5 TOUCH_FRAME +128.048s event5 TOUCH_FRAME +1803.850s event5 TOUCH_DOWN +1805.482s 0 (0) 13.42/58.62 (41.49/102.18mm) event5 TOUCH_DOWN +129.680s 0 (0) 13.42/58.62 (41.49/102.18mm) event5 TOUCH_FRAME +1805.482s event5 TOUCH_FRAME +129.680s event5 TOUCH_MOTION +129.759s 0 (0) 13.40/58.69 (41.43/102.30mm) event5 TOUCH_MOTION +1805.561s 0 (0) 13.40/58.69 (41.43/102.30mm) event5 TOUCH_FRAME +129.759s event5 TOUCH_FRAME +1805.561s event5 TOUCH_UP +1805.571s 0 (0) event5 TOUCH_FRAME +1805.571s event5 TOUCH_UP +129.769s 0 (0) event5 TOUCH_FRAME +129.769s -event2 KEYBOARD_KEY +152.493s *** (-1) pressed -event2 KEYBOARD_KEY +1828.295s *** (-1) pressed event2 KEYBOARD_KEY +1828.415s *** (-1) released event2 KEYBOARD_KEY +152.613s *** (-1) released -event5 TOUCH_DOWN +1833.327s 0 (0) 75.52/59.96 (233.47/104.52mm) -event5 TOUCH_DOWN +157.525s 0 (0) 75.52/59.96 (233.47/104.52mm) event5 TOUCH_FRAME +1833.327s event5 TOUCH_FRAME +157.525s event5 TOUCH_UP +157.526s 0 (0) event5 TOUCH_FRAME +157.526s event5 TOUCH_UP +1833.328s 0 (0) event5 TOUCH_FRAME +1833.328s event5 TOUCH_DOWN +157.527s 0 (0) 76.42/48.73 (236.26/84.94mm) Here, I'm tabing a movie and starting it, but haivng to press the ESC key on a keyboard to exit the movie and gain control with the touchscreen again... I hope some of you can help with solutions or maybe suggestions on where to look / how to proceed? Thanks!

Hello I am setting up my brande new Raspberry Pi4 (4GB) and I have few questions. I am using RASPBIAN 10 Buster 1. Which installation wy is better/appriopriate a) echo 'deb http://download.opensuse.org/repositories/home:/emby/Debian_Next/ /' > /etc/apt/sources.list.d/emby-server.list apt-get update apt-get install emby-server Should I use mono or amrhf version? https://emby.media/linux-server.html Debian Armv7 (armhf) Download emby-server-deb_4.4.1.0_armhf.deb dpkg -i emby-server-deb_4.4.1.0_armhf.deb Open a web browser to http://localhost:8096 2. Any other important things related to Rpi4? 3. How much memory-split in raspi-config for Rpi4 (in Rpi3 it was im not sure but 256mb propably)

Hello, im trying to watch live tv via the emby-next-gen addon (6.2.15). Unfortunately this fails. When I select a channel on kodi (19.4), i get a spinning wheel, followed by the error message: One or more items failed to play. Check the log for more information about this message. when i try and play the same channel on my android phone with the emby app it plays fine. I even installed the kodi app on my phone to see if the behaviour would be different but I get the same error. the same error happens when I install the emby-next-gen addon from the emby beta repository. I have included the debug kodi log and the debug emby server log. i start the stream at 22:49. sorry i did not find the option in emby-next-gen addon to enable debug logging embyserver-63790325406.txt kodi.log

I have been running emby for a several years. Easy setup and I like being able to watch it remotely. I almost exclusively use kodi on various devices to access emby. On my main kodi, which runs on a raspi4, I use the janitor plugin to clean up watched episodes. Until recently when I made a folder stricture change, it was working perfectly. Since I use janitor and have several tv series I want to keep. I now have more serious than exclusions that janitor allows, therefore I have created a second folder called saved tv. Now just one exclusion to keep track of. I added this second folder to my library. Emby sees the episodes. I have the folder as a source on kodi. Kodi starts to see the episodes when emby is scanning the folders. After the scan is completed, kodi still displays the various series but shows 0/0 for the number of episodes. Therefore I cannot watch them. My kodi is using direct playback since both the server and kodi are on my internal network. Second issue I have is auto organize not deleting folders after it organized a show or movie. This was working before switching to dsm7. The only other issue I have is kodi doesn't seem to get updates from emby server unless kodi is restarted daily. Simple fix with a cron job. Anyone have thoughts on what is going on? Attached pics to help show what is going on.

Hi all I'm having strange issue when I cast normally everything works fine, but as soon as a skip forward the screen freezes (at the right point) and the audio continues. This happens when casting from Android app and chrome on laptop

I am using docker, i have the exact same set up with jellyfin, i just wanted to try emby as they have apps for my lg tv. If i go into my docker containers cli i can see all the films and tv shows, they just don't appear in my movie or tv show library on the emby gui when i have scanned them, the path is exactly the same as my existing jellyfin docker which works without issue. Logs are here: Info App: Loading Emby.Notifications, Version=4.6.4.0, Culture=neutral, PublicKeyToken=null, Info App: Loading Emby.Codecs.Dxva, Version=4.6.4.0, Culture=neutral, PublicKeyToken=null, Info App: Loading Emby.Codecs, Version=4.6.4.0, Culture=neutral, PublicKeyToken=null, Info App: Loading Emby.Server.Connect, Version=4.6.4.0, Culture=neutral, PublicKeyToken=null, Info App: Loading Emby.Server.Sync, Version=4.6.4.0, Culture=neutral, PublicKeyToken=null, Info App: Loading EmbyServer, Version=4.6.4.0, Culture=neutral, PublicKeyToken=null, Info SqliteUserRepository: Sqlite version: 3.35.5, Info SqliteUserRepository: Sqlite compiler options: COMPILER=gcc-8.3.0,ENABLE_COLUMN_METADATA,ENABLE_DBSTAT_VTAB,ENABLE_FTS3_PARENTHESIS,ENABLE_FTS3_TOKENIZER,ENABLE_FTS4,ENABLE_FTS5,ENABLE_GEOPOLY,ENABLE_JSON1,ENABLE_MATH_FUNCTIONS,ENABLE_PREUPDATE_HOOK,ENABLE_RTREE,ENABLE_SESSION,ENABLE_UNLOCK_NOTIFY,ENABLE_UPDATE_DELETE_LIMIT,LIKE_DOESNT_MATCH_BLOBS,MAX_SCHEMA_RETRY=25,MAX_VARIABLE_NUMBER=250000,OMIT_LOOKASIDE,SECURE_DELETE,THREADSAFE=1, Info SqliteUserRepository: Default journal_mode for /config/data/users.db is wal, Info AuthenticationRepository: Default journal_mode for /config/data/authentication.db is wal, Info ActivityRepository: Default journal_mode for /config/data/activitylog.db is wal, Info SqliteDisplayPreferencesRepository: Default journal_mode for /config/data/displaypreferences.db is wal, Info App: Adding HttpListener prefix http://+:8096/, Info SqliteItemRepository: Default journal_mode for /config/data/library.db is wal, Info SqliteItemRepository: cache_size is -98304, Info SqliteItemRepository: page_size is 4096, Info FfmpegManager: FFMpeg: /bin/ffmpeg, Info FfmpegManager: FFProbe: /bin/ffprobe, Info FfmpegManager: FFDetect: /bin/ffdetect, Info Skia: SkiaSharp version: 2.80.0.0, Info TaskManager: Daily trigger for Thumbnail image extraction set to fire at 08/10/2021 02:00:00, which is 147.766498335 minutes from now., Info TaskManager: Daily trigger for Rotate log file set to fire at 08/10/2021 00:00:00, which is 27.765629838333332 minutes from now., Info App: ServerId: 160d125f79c749ceaeb31cd227f2eb47, Info Server: http/1.1 GET http://192.168.0.7:8096/emby/system/info/public. UserAgent: Mozilla/5.0 (Linux; Android 10; ONEPLUS A6013 Build/QKQ1.190716.003; wv) AppleWebKit/537.36 (KHTML, like Gecko) Version/4.0 Chrome/92.0.4515.131 Mobile Safari/537.36, Info Server: http/1.1 Response 503 to 192.168.0.5. Time: 156ms. http://192.168.0.7:8096/emby/system/info/public, Info App: Starting entry point Emby.Dlna.Main.DlnaEntryPoint, Info Dlna: Registering publisher for urn:schemas-upnp-org:device:MediaServer:1, Info NetworkManager: Detected local ip addresses: 192.168.0.7, 127.0.0.1, Info App: Entry point completed: Emby.Dlna.Main.DlnaEntryPoint. Duration: 0.3627385 seconds, Info App: Starting entry point Emby.Server.Connect.ConnectEntryPoint, Info App: Loading data from /config/data/connect.txt, Info App: Loading data from /config/data/wan.dat, Info App: Entry point completed: Emby.Server.Connect.ConnectEntryPoint. Duration: 0.0222597 seconds, Info App: Core startup complete, Info App: Post-init migrations complete, Info App: Starting entry point Emby.Security.PluginSecurityManager, Info App: Entry point completed: Emby.Security.PluginSecurityManager. Duration: 0.0003403 seconds, Info App: Starting entry point Emby.Server.CinemaMode.IntrosEntryPoint, Info App: Entry point completed: Emby.Server.CinemaMode.IntrosEntryPoint. Duration: 0.0006473 seconds, Info App: Starting entry point Emby.Webhooks.WebhooksEntryPoint, Info App: Entry point completed: Emby.Webhooks.WebhooksEntryPoint. Duration: 0.0091679 seconds, Info App: Starting entry point Emby.PortMapper.ExternalPortForwarding, Info App: Entry point completed: Emby.PortMapper.ExternalPortForwarding. Duration: 0.0022248 seconds, Info App: Starting entry point NfoMetadata.EntryPoint, Info App: Entry point completed: NfoMetadata.EntryPoint. Duration: 0.0009112 seconds, Info App: Starting entry point MediaBrowser.Api.ApiEntryPoint, Info App: Entry point completed: MediaBrowser.Api.ApiEntryPoint. Duration: 0.0003795 seconds, Info App: Starting entry point Emby.Server.Implementations.Udp.UdpServerEntryPoint, Info App: Entry point completed: Emby.Server.Implementations.Udp.UdpServerEntryPoint. Duration: 0.0048624 seconds, Info App: Starting entry point Emby.Server.Implementations.News.NewsEntryPoint, Info App: Entry point completed: Emby.Server.Implementations.News.NewsEntryPoint. Duration: 0.0006593 seconds, Info App: Starting entry point Emby.Server.Implementations.Library.DeviceAccessEntryPoint, Info App: Entry point completed: Emby.Server.Implementations.Library.DeviceAccessEntryPoint. Duration: 0.0022856 seconds, Info App: Starting entry point Emby.Server.Implementations.IO.LibraryMonitorStartup, Info App: Init BeginReceive on 0.0.0.0, Info App: Init BeginReceive on 0.0.0.0, Info App: Init BeginReceive on 192.168.0.7, Info App: Init BeginReceive on 127.0.0.1, Info HttpClient: GET https://emby.media/community/index.php?/blog/rss/1-media-browser-developers-blog, Info LibraryMonitor: Skipping realtime monitor for /data/movies because the path does not exist, Info LibraryMonitor: Skipping realtime monitor for /data/tvshows because the path does not exist, Info App: Entry point completed: Emby.Server.Implementations.IO.LibraryMonitorStartup. Duration: 0.7805528 seconds, Info App: Starting entry point Emby.Server.Implementations.EntryPoints.AutomaticRestartEntryPoint, Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.AutomaticRestartEntryPoint. Duration: 0.0010587 seconds, Info App: Starting entry point Emby.Server.Implementations.EntryPoints.KeepServerAwake, Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.KeepServerAwake. Duration: 0.0006837 seconds, Info App: Starting entry point Emby.Server.Implementations.EntryPoints.LibraryChangedNotifier, Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.LibraryChangedNotifier. Duration: 0.0084622 seconds, Info App: Starting entry point Emby.Server.Implementations.EntryPoints.ServerEventNotifier, Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.ServerEventNotifier. Duration: 0.0087661 seconds, Info App: Starting entry point Emby.Server.Implementations.EntryPoints.StartupWizard, Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.StartupWizard. Duration: 0.001243 seconds, Info App: Starting entry point Emby.Server.Implementations.EntryPoints.SystemEvents, Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.SystemEvents. Duration: 0.0017413 seconds, Info App: Starting entry point Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier, Info App: Entry point completed: Emby.Server.Implementations.EntryPoints.UserDataChangeNotifier. Duration: 0.000559 seconds, Info App: Starting entry point Emby.Server.Implementations.Channels.ChannelsEntryPoint, Info App: Entry point completed: Emby.Server.Implementations.Channels.ChannelsEntryPoint. Duration: 0.0073198 seconds, Info App: Starting entry point Emby.LiveTV.EntryPoint, Info LiveTV: Loading live tv data from /config/data/livetv/timers, Info App: Entry point completed: Emby.LiveTV.EntryPoint. Duration: 0.0511545 seconds, Info App: Starting entry point Emby.LiveTV.UpgradeChannelOptionsEntryPoint, Info App: Entry point completed: Emby.LiveTV.UpgradeChannelOptionsEntryPoint. Duration: 0.0037867 seconds, Info App: Starting entry point Emby.LiveTV.RecordingNotifier, Info App: Entry point completed: Emby.LiveTV.RecordingNotifier. Duration: 0.0070804 seconds, Info App: Starting entry point Emby.ActivityLog.ActivityLogEntryPoint, Info App: Entry point completed: Emby.ActivityLog.ActivityLogEntryPoint. Duration: 0.009562 seconds, Info App: Starting entry point Emby.Server.MediaEncoding.Api.EncodingManagerEntryPoint, Info App: Entry point completed: Emby.Server.MediaEncoding.Api.EncodingManagerEntryPoint. Duration: 0.0040112 seconds, Info App: Starting entry point Emby.Notifications.Notifications, Info App: Entry point completed: Emby.Notifications.Notifications. Duration: 0.0011337 seconds, Info App: Starting entry point Emby.Server.Sync.SyncManagerEntryPoint, Info App: SyncRepository Initialize taking write lock, Info App: SyncRepository Initialize write lock taken, Info App: Entry point completed: Emby.Server.Sync.SyncManagerEntryPoint. Duration: 0.0143517 seconds, Info App: Starting entry point Emby.Server.Sync.SyncNotificationEntryPoint, Info App: Entry point completed: Emby.Server.Sync.SyncNotificationEntryPoint. Duration: 0.0058497 seconds, Info App: Starting entry point EmbyServer.Windows.LoopUtilEntryPoint, Info App: Entry point completed: EmbyServer.Windows.LoopUtilEntryPoint. Duration: 0.0004983 seconds, Info App: All entry points have started

Hello everyone! I'm thinking in build a media server using emby, I wan't to have the lowest energy cost so I could leave it on all the time. MVP Idea My idea is to use a RPi 4 with 8GB of ram but I have seen in the forum that it has some decoding and encoding problems but I really don't know what that means in this context, I know the file should be encoded to be playable but my videos are already playable so I don't know why emby needs to encode them again. Also I have found this thread that says the raspberry pi could use hardware encoding and this reddit post that says the same but with a lot more steps. Future of the idea (could ignore) Also I'm thinking of use this server as a personal cloud using owncloud so I could have my media and another files on demand. I want to "stream" comics (cbr/cbz) from my server to an android app. Software Installation Install Open Media Vault or Raspibian Install Emby server on it using the Debian package The hardware I'm planing to buy Raspberry Py 4 8GB HDD Dock station The RPi could be changed for a mini PC but I'll really love to use a PI over a PC because of the cost it's less than half and the energy consumption. AWOW Mini PC Celeron 1.2 - 2.2 GHz 4 core 6GB ram 128 ssd Intel HD Graphics 500 Beelink U57 Core i5 2.7 - 3.1 GHz 2 core 8 ram 128 ssd Intel Iris Graphics 6100 My personal context: I have used Kodi for a long time and know how to manage my library. - all my video files are MKV (720p and 1080p) and most with included subtitles and dual audio, the rest have STR files. - near 3TB of multimedia + 100GB of comics files. I have an emby server running in a Linux Machine with the files previous mentioned. - Use kodi in the same machine - Use roku stick on the bedroom I'm a linux used so I'm not scared of some commands or use the terminal if needed I don't care about 4K or +60 FPS because I don't have a TV with that capabilities and don't think in buy one in a couple of years.