Search the Community

Hi Newbie to the forum and recently ditched Plex for Emby just months ago. I see what the buzz is about! With the proliferation of PGS subtitle use, it has really been a challenge since PGS is not supported. So off to the supported extensions. However I have exhausted every effort to get the search and download subtitles feature to work other than coming up with no results. Here is what I have done so far: I have ascertained that the file name is relevant Made certain IMBD ID is correct I signed up for both Open Subtitles and Addic7ed I installed both Open Subtitles and Addic7ed plugins and entered credentials Rebooted Emby after plugin install I have selected the movies library via advanced setting, set sub language to English, assured both plugins were checked, and to hopefully increase chances of getting something returned, I toggled just about everything off ( including "require a hash match..etc".) And I've just upgraded to 4.8 Beta The end result is the same. Every single movie subtitle search comes up with no results. Please let me know if I have missed anything. Thank you. Sh4ggy

I have emby APP installed on my Synology NAS. If I use my Roku Ultra (also using emby APP) to stream personal videos from my Synology server, everything is working good. If I use my Amazon FireStick (with emby APP), a lot of my videos are upside down or sideways. Videos were recorded using my iPhone. Thanks

Hello everyone, I’m setting up an Emby server on a NAS DS224+ and have reached the transcoding section, a topic I’m not very familiar with. The NAS processor is an Intel Celeron J4125, which, according to its technical specs and what I found on Wikipedia, has the following compatibility: Transcoding: MPEG-2, AVC, VP8, HEVC, HEVC 10-bit. Decoding only: VC-1, VP9, VP9 10-bit. My question is how to interpret this information in Emby’s settings. Each codec seems to have at least two configuration options, and there’s a priority order between them. I recently purchased the Emby license, giving me access to the Transcoding Tests plugin. However, I found it quite overwhelming due to the number of available options. I decided to perform the file-based test and selected all the options available. Then, I assigned a folder for the tests and started the task. This generated several files in the assigned folder and began a series of tests, but most of them are returning errors. Additionally, I noticed there are over 1200 tests, and after 2 hours, only 16 tests have been completed. Is this normal, or did I do something wrong? I’d greatly appreciate it if someone with experience in this topic could guide me on how to properly configure transcoding in Emby. Thank you in advance!

This certificate was specifically created to use Emby through the Microsoft Edge browser over HTTPS on port 8920, eliminating the "connection is not secure" warning. It is important to note that this certificate works properly in Edge but not in Firefox. For the certificate to function correctly, it must be installed both in the Windows Certificate Manager and on the NAS where the Emby server is hosted. Note: The domain names and IPs used here are examples (, ) and must be replaced with those corresponding to your network.example.domain.lansubdomain.local.domain 1. Generate the .crt and .key files Open the Windows terminal: Launch a terminal (Command Prompt or PowerShell) and navigate to the folder where you want to generate the files. Choose the appropriate command based on your needs: For a single domain (single SAN): openssl req -x509 -newkey rsa:2048 -sha256 -days 3650 -nodes -keyout example.domain.lan.key -out example.domain.lan.crt -subj "/CN=example.domain.lan" -addext "subjectAltName=DNS:example.domain.lan" For multiple domains and IPs (multiple SANs): openssl req -x509 -newkey rsa:2048 -sha256 -days 3650 -nodes -keyout example.domain.lan.key -out example.domain.lan.crt -subj "/CN=example.domain.lan" -addext "subjectAltName=DNS:example.domain.lan,DNS:subdomain.local.domain,IP:192.168.1.xx" Verify the results: The files and will be generated in the specified folder. example.domain.lan.crt and example.domain.lan.key 2. Create the .pfx file for Emby Use the following command to merge the and files into a file: .crt + .key = .pfx openssl pkcs12 -export -out example.domain.lan.pfx -inkey example.domain.lan.key -in example.domain.lan.crt -name "example.domain.lan" Set a password for the .pfx file: You’ll be prompted to enter and confirm a password. You can leave it blank or assign one. Note: If you assign a password, remember it, as it will be required in Emby’s settings. The file will be generated in the same folder. example.domain.lan.pfx 3. Upload the .pfx file to the NAS Transfer the file: Copy the file to a folder accessible on your NAS. example.domain.lan.pfx Ensure that Emby can access the path where the file is stored. 4. Install the .crt certificate in Windows Open the .crt file directly: Double-click on the file . example.domain.lan.crt Click the Install Certificate button. Follow the installation wizard: Select Current User as the target location. Choose Place all certificates in the following store. Click Browse and select Trusted Root Certification Authorities. Click OK, then Next, and finally Finish. Confirm the installation: A confirmation message will appear asking if you want to install the certificate. Accept to complete the installation. 5. Configure Emby with the certificate Log in to Emby and navigate to Settings → Network. Locate the section Custom SSL certificate path. Enter the path to the file you uploaded to the NAS..pfx If you set a password for the file, enter it in the corresponding field. If you left it blank, leave the field empty..pfx In Secure connection mode, select: "Preferred, but not required" (this allows connections via both HTTP and HTTPS). Click Save and restart the Emby server to apply the changes. Important Notes The domain names (, ) and IP () are examples. Replace them with the actual domains and IPs of your network.example.domain.lansubdomain.local.domain192.168.1.xx If you need to include more addresses or subdomains, add them to the field when generating the certificate. For example:subjectAltName -addext "subjectAltName=DNS:example.domain.lan,DNS:subdomain.local.domain,DNS:extra.domain.com,IP:192.168.2.xx" Credits This guide was completed with the help and insights provided by @Lessajwhose expertise made this task much easier. Thank you for your support! Final Note If there's anything I missed or ways to improve this guide, I’d greatly appreciate your feedback and insights. Sharing your knowledge or suggesting adjustments would not only help refine this guide but also assist others who might face similar challenges. Feel free to share your thoughts—I'm always open to learning and improving. Thank you in advance!

Greetings, I recently purchased the Emby Premiere lifetime license and have been transitioning from Jellyfin to Emby due to better support. So far, the experience has been positive, but I’ve encountered a problem I can’t seem to resolve. I prefer to access my Emby server through a web browser rather than the apps, as the browser offers tools like image capture and translation features, which allow me to interact directly with the server. However, the constant message stating "this site is not secure" has become very annoying. For context, I’m hosting my Emby server on a Synology NAS. I set up a local DNS address using Synology's DNS server to ensure I can access the server even during internet outages. The DNS address I created is nas.angelsing.local.lan, which is directly linked to the NAS’s local IP. This setup allows me to access the server locally without relying on internet connectivity. The problem is that browsers detect this DNS address as insecure. To address this, I tried creating a self-signed SSL certificate using OpenSSL on Windows. This process generated two files: .crt and .key. I imported the .crt file into the Windows certificate manager to make it trusted by my machine. I also merged the .crt and .key files into a .pfx file, as Emby requires this format for SSL certificates. I uploaded the .pfx file to an accessible folder on the NAS and configured the certificate path in Emby’s Network settings. With this, I was able to access the server using https://nas.angelsing.local.lan:8920. However, the browser warning about the site being insecure still appears (tested on Edge). While I can access the server, the browser continues to flag the connection as not secure. It’s worth noting that I have another certificate issued by Synology for my public DDNS address xxx.DDNS.synology, which works perfectly for remote connections. However, I specifically need a solution for my local address nas.angelsing.local.lan so that browsers stop showing this warning when accessing the server locally. Has anyone encountered a similar issue or knows how to obtain a certificate that is recognized as secure by browsers for local addresses? Is there something I need to configure additionally on the NAS or in Emby to resolve this? I’d greatly appreciate any guidance or advice. Thank you in advance!

I run Emby on my DS223j Nas and a Win 11 PC. Emby reports my server needs updating from 8.0 to 10. It instructs me to download the update (which I did) emby-server-synology72_4.8.10.0_x86_64.spk Now it tells me to stop the server. After I stop the server, how do I update Emby on my NAS??? The update file does not open saying to pick a program to open it. I spend 2 hours searching for a simple procedure explaining how I update the Emby server! Is this some secret operation? Why is there no help on the steps I do to simply update my server? Any help would be appreciated.

Hello together, i want to switch from plex to emby, bought a life time premiere pass to make sure not to miss anything. Now i want to import my directories. I added emby user to the old plex directories on the synology level. So far so good. I am able to import all files. But, right now, i really have problems with my ripped audio books and cds. In all imported directories i added cover.jpg files. But somehow, especially with audiobooks, the images are not detected or at least not shown in my library. For showing audiobooks i open my audiobook library and switch to the books panel. Here i dont see any images. On the other hand: if i switch to the folder/diretory tab, there i see the directories with images. Here are some examples: Also in the music libs there are some pictures not detected or shown. Here its only 10%, Audiobooks are 95%. I tried to play with the settings of the lib, but actually i dont know with setting is the best. I assume, usually images in the directories should be taken first, only if there is no image it tries to look up in the internet? Is it a problem if the albums are not detected? But again, i would assume, it would take local pictures first. Additionally it seems like the feature for saving images in the media folder doesnt work. I tried to upload images in the emby gui but the uploaded images didnt show up in the local media folder of the album. I read the naming convention stuff, i waited until the scan was complete (no green bar anywhere anymore). Maybe someone is able to help here?

Dear community I'm using KODI + Emby (installed on my NAS) for many years now, but now my kids are more and more playing around TV alone, and when I'm not especially around, and I would like to secure a little bit then content they may have access to. I tried to set up a new profile in KODI, ok that's easy so far. Then I set up a new profiles in Emby, selecting the content depending on tags (like TV-MA, FR-16...). When I logg of my Admin profile in KODI and enter the kids profile, it's like the plugin emby for kodi is not even installed (I chose "separate" for content source)... I tried to recreate another profile but choosing then "share" option. While loggin into my kids profile, there is an error message of the plugin Emby for Kodi, and I have no content... Well I'm a bit stuck, I don't really understand what I'm doing wrong... Any help would be much appreciated Thanks !

Hello, Since I updated from 4.7.14 to 4.8.3.0 the external subtitles are not rendered anymore on videos. Here's some information about the NAS: Version: DSM 7.1.1-42962 Update 5 Model: DS213j CPU: MARVELL Armada 370 88F6707 It seems that all ffmpeg related operations are failing, here are some logs of the errors: 2024-03-06 16:29:09.193 Info Main: Emby Command line: /volume1/@appstore/EmbyServer/system/EmbyServer.exe -programdata /var/packages/EmbyServer/var -ffdetect /var/packages/EmbyServer/target/bin/ffdetect -ffmpeg /var/packages/EmbyServer/target/bin/ffmpeg -ffprobe /var/packages/EmbyServer/target/bin/ffprobe -defaultdirectory /volume1/Public -updatepackage emby-server-synology7-mono_{version}_armv7_legacy.spk -pidfile /var/packages/EmbyServer/var/EmbyServer.pid -nolocalportconfig -noskia -ignore_vaapi_enabled_flag Operating system: Linux version 3.2.101 (root@build7) (gcc version 8.5.0 (GCC) ) #42962 Fri Mar 24 00:28:03 CST 2023 Framework: Mono: 6.12.0.182 (tarball Thu Jan 19 10:28:52 PM UTC 2023) OS/Process: X86/X86 Runtime: volume1/@appstore/EmbyServer/lib/mono/4.5/mscorlib.dll Processor count: 1 Data path: /var/packages/EmbyServer/var Application path: /volume1/@appstore/EmbyServer/system 2024-03-06 16:29:38.836 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -version' Execute: /var/packages/EmbyServer/target/bin/ffmpeg -hide_banner -version 2024-03-06 16:29:39.849 Info App: Starting entry point Emby.Dlna.Main.DlnaEntryPoint 2024-03-06 16:29:41.036 Info FfmpegManager: ProcessRun 'ffmpeg -hide_banner -version' Process exited with code 132 - Failed 2024-03-06 16:29:41.101 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -version' Output: 2024-03-06 16:29:41.103 Error FfmpegManager: ProcessRun 'ffmpeg -hide_banner -version' Error Output: 2024-03-06 17:11:51.835 Info SubtitleEncoder: ProcessRun 'ffmpeg-subtitle_convert' Process exited with code 132 - Failed 2024-03-06 17:11:51.840 Error SubtitleEncoder: ffmpeg subtitle conversion failed for /volume1/video/subtitle.eng.srt 2024-03-06 17:11:51.841 Error SubtitleEncoder: ProcessRun 'ffmpeg-subtitle_convert' Output: 2024-03-06 17:11:51.841 Error SubtitleEncoder: ProcessRun 'ffmpeg-subtitle_convert' Error Output: 2024-03-06 17:11:51.972 Error App: Error getting subtitles *** Error Report *** Version: 4.8.3.0 Command line: /volume1/@appstore/EmbyServer/system/EmbyServer.exe -programdata /var/packages/EmbyServer/var -ffdetect /var/packages/EmbyServer/target/bin/ffdetect -ffmpeg /var/packages/EmbyServer/target/bin/ffmpeg -ffprobe /var/packages/EmbyServer/target/bin/ffprobe -defaultdirectory /volume1/Public -updatepackage emby-server-synology7-mono_{version}_armv7_legacy.spk -pidfile /var/packages/EmbyServer/var/EmbyServer.pid -nolocalportconfig -noskia -ignore_vaapi_enabled_flag Operating system: Linux version 3.2.101 (root@build7) (gcc version 8.5.0 (GCC) ) #42962 Fri Mar 24 00:28:03 CST 2023 Framework: Mono: 6.12.0.182 (tarball Thu Jan 19 10:28:52 PM UTC 2023) OS/Process: X86/X86 Runtime: volume1/@appstore/EmbyServer/lib/mono/4.5/mscorlib.dll Processor count: 1 Data path: /var/packages/EmbyServer/var Application path: /volume1/@appstore/EmbyServer/system System.Exception: System.Exception: ffmpeg subtitle conversion failed for /volume1/video/subtitle.eng.srt at Emby.Server.MediaEncoding.Subtitles.SubtitleEncoder.ConvertExternalSubtitleInternal (MediaBrowser.Model.Entities.MediaStream subtitleStream, System.Collections.Generic.IDictionary`2[TKey,TValue] requestHeaders, System.String outputPath, Emby.Media.Model.Enums.SubtitleMediaTypes outputCodec, System.Nullable`1[T] startTime, System.Nullable`1[T] endTime, System.Boolean preserveOriginalTimestamps, System.Threading.CancellationToken cancellationToken) [0x0073a] in <3f3cc22c13094dd1a8ace54832e3e042>:0 at Emby.Server.MediaEncoding.Subtitles.SubtitleEncoder.ConvertExternalSubtitle (MediaBrowser.Model.Entities.MediaStream subtitleStream, System.Collections.Generic.IDictionary`2[TKey,TValue] requestHeaders, System.String outputPath, Emby.Media.Model.Enums.SubtitleMediaTypes outputCodec, System.Nullable`1[T] startTime, System.Nullable`1[T] endTime, System.Boolean preserveOriginalTimestamps, System.Threading.CancellationToken cancellationToken) [0x0013f] in <3f3cc22c13094dd1a8ace54832e3e042>:0 at Emby.Server.MediaEncoding.Subtitles.SubtitleEncoder.GetReadableFile (System.String mediaPath, MediaBrowser.Model.MediaInfo.MediaProtocol mediaSourceProtocol, System.Boolean isAudio, System.Collections.Generic.IDictionary`2[TKey,TValue] requestHeaders, MediaBrowser.Model.Entities.MediaStream subtitleStream, System.String outputFormat, System.Int64 startTimeTicks, System.Int64 endTimeTicks, System.Boolean preserveOriginalTimestamps, MediaBrowser.Model.Dlna.EncodingContext encodingContext, System.Threading.CancellationToken cancellationToken) [0x0037f] in <3f3cc22c13094dd1a8ace54832e3e042>:0 at Emby.Server.MediaEncoding.Subtitles.SubtitleEncoder.GetSubtitles (System.String inputPath, MediaBrowser.Model.MediaInfo.MediaProtocol inputProtocol, System.Boolean isAudio, System.Collections.Generic.IDictionary`2[TKey,TValue] requestHeaders, MediaBrowser.Model.Entities.MediaStream subtitleStream, System.String outputFormat, System.Int64 startTimeTicks, System.Int64 endTimeTicks, System.Boolean preserveOriginalTimestamps, MediaBrowser.Model.Dlna.EncodingContext encodingContext, System.Threading.CancellationToken cancellationToken) [0x0011a] in <3f3cc22c13094dd1a8ace54832e3e042>:0 at Emby.Api.Subtitles.SubtitleService.GetSubtitles (Emby.Api.Subtitles.GetSubtitle request, System.Threading.CancellationToken cancellationToken) [0x002fc] in <53aa55c1ddf84136832a4775a5507478>:0 at Emby.Api.Subtitles.SubtitleService.Get (Emby.Api.Subtitles.GetSubtitle request) [0x00265] in <53aa55c1ddf84136832a4775a5507478>:0 Source: mscorlib TargetSite: Void Throw() I tried to execute the ffmpeg binary packaged with the server but I' m not able to run it.

Either a ROKU or SERVER option to not have SONGS show up...

Hi, question how do I move my Server in my Synology NAS to my Windows machine I tried putting my Emby server in Windows and tried the external address to stream out my network with Windows but it keeps going back to the Synology NAS server instead of the Windows Server. I tried to stop the server in my Synology NAS but it keeps on going back to that server. Any clues about what I am doing wrong?

I have the same issue

Good afternoon, I've been searching through my most recent server log for an unrelated project that I've been working on and found a few errors in the log output that I wanted to present to the forums to see if there is any advice to resolve these errors? 2023-03-29 13:24:42.908 Error App: Error in AddResolvedExtras for data\collections 0 /var/packages/EmbyServer/var/data\collections *** Error Report *** Version: 4.7.11.0 Command line: /volume1/@appstore/EmbyServer/system/EmbyServer.dll -programdata /var/packages/EmbyServer/var -ffdetect /var/packages/EmbyServer/target/bin/ffdetect -ffmpeg /var/packages/EmbyServer/target/bin/ffmpeg -ffprobe /var/packages/EmbyServer/target/bin/ffprobe -nolocalportconfig -ignore_vaapi_enabled_flag -pidfile /var/packages/EmbyServer/var/EmbyServer.pid -defaultdirectory /volume1/Public -updatepackage emby-server-synology7_{version}_x86_64.spk -noautorunwebapp Operating system: Linux version 4.4.180+ (root@build1) (gcc version 8.5.0 (GCC) ) #42962 SMP Fri Feb 10 16:34:17 CST 2023 Framework: .NET 6.0.8 OS/Process: x64/x64 Runtime: volume1/@appstore/EmbyServer/system/System.Private.CoreLib.dll Processor count: 8 Data path: /var/packages/EmbyServer/var Application path: /volume1/@appstore/EmbyServer/system System.IO.DirectoryNotFoundException: System.IO.DirectoryNotFoundException: Could not find a part of the path '/var/packages/EmbyServer/var/data\collections'. at System.IO.Enumeration.FileSystemEnumerator`1.CreateDirectoryHandle(String path, Boolean ignoreNotFound) at System.IO.Enumeration.FileSystemEnumerator`1.Init() at System.IO.Enumeration.FileSystemEnumerator`1..ctor(String directory, Boolean isNormalized, EnumerationOptions options) at System.IO.Enumeration.FileSystemEnumerable`1..ctor(String directory, FindTransform transform, EnumerationOptions options, Boolean isNormalized) at System.IO.Enumeration.FileSystemEnumerableFactory.FileSystemInfos(String directory, String expression, EnumerationOptions options, Boolean isNormalized) at System.IO.DirectoryInfo.InternalEnumerateInfos(String path, String searchPattern, SearchTarget searchTarget, EnumerationOptions options) at System.IO.DirectoryInfo.EnumerateFileSystemInfos(String searchPattern, SearchOption searchOption) at Emby.Server.Implementations.IO.ManagedFileSystem.GetFileSystemEntries(String path, Boolean recursive) at MediaBrowser.Controller.Providers.DirectoryService.GetFileSystemEntries(String path, Boolean clearCache) at MediaBrowser.Controller.Providers.DirectoryService.GetFileSystemEntries(String path) at MediaBrowser.Controller.Entities.BaseItem.GetFileSystemChildren(IDirectoryService directoryService) at Emby.Server.Implementations.Library.LibraryManager.AddResolvedExtras(BaseItem item, IDirectoryService directoryService) Source: System.Private.CoreLib TargetSite: IntPtr CreateDirectoryHandle(System.String, Boolean) 2023-03-29 13:24:43.016 Error App: Error getting files from /var/packages/EmbyServer/var/data\collections *** Error Report *** Version: 4.7.11.0 Command line: /volume1/@appstore/EmbyServer/system/EmbyServer.dll -programdata /var/packages/EmbyServer/var -ffdetect /var/packages/EmbyServer/target/bin/ffdetect -ffmpeg /var/packages/EmbyServer/target/bin/ffmpeg -ffprobe /var/packages/EmbyServer/target/bin/ffprobe -nolocalportconfig -ignore_vaapi_enabled_flag -pidfile /var/packages/EmbyServer/var/EmbyServer.pid -defaultdirectory /volume1/Public -updatepackage emby-server-synology7_{version}_x86_64.spk -noautorunwebapp Operating system: Linux version 4.4.180+ (root@build1) (gcc version 8.5.0 (GCC) ) #42962 SMP Fri Feb 10 16:34:17 CST 2023 Framework: .NET 6.0.8 OS/Process: x64/x64 Runtime: volume1/@appstore/EmbyServer/system/System.Private.CoreLib.dll Processor count: 8 Data path: /var/packages/EmbyServer/var Application path: /volume1/@appstore/EmbyServer/system System.IO.DirectoryNotFoundException: System.IO.DirectoryNotFoundException: Could not find a part of the path '/var/packages/EmbyServer/var/data\collections'. at System.IO.Enumeration.FileSystemEnumerator`1.CreateDirectoryHandle(String path, Boolean ignoreNotFound) at System.IO.Enumeration.FileSystemEnumerator`1.Init() at System.IO.Enumeration.FileSystemEnumerator`1..ctor(String directory, Boolean isNormalized, EnumerationOptions options) at System.IO.Enumeration.FileSystemEnumerable`1..ctor(String directory, FindTransform transform, EnumerationOptions options, Boolean isNormalized) at System.IO.Enumeration.FileSystemEnumerableFactory.FileSystemInfos(String directory, String expression, EnumerationOptions options, Boolean isNormalized) at System.IO.DirectoryInfo.InternalEnumerateInfos(String path, String searchPattern, SearchTarget searchTarget, EnumerationOptions options) at System.IO.DirectoryInfo.EnumerateFileSystemInfos(String searchPattern, SearchOption searchOption) at Emby.Server.Implementations.IO.ManagedFileSystem.GetFileSystemEntries(String path, Boolean recursive) at MediaBrowser.Controller.Providers.DirectoryService.GetFileSystemEntries(String path, Boolean clearCache) at MediaBrowser.Controller.Providers.DirectoryService.GetFileSystemEntries(String path) at MediaBrowser.LocalMetadata.Images.LocalImageProvider.GetFiles(String[] paths, Boolean throwOnException, IDirectoryService directoryService) Source: System.Private.CoreLib TargetSite: IntPtr CreateDirectoryHandle(System.String, Boolean) 2023-03-29 13:24:43.462 Error BaseItem: Error validating children for data\collections 10 /var/packages/EmbyServer/var/data\collections *** Error Report *** Version: 4.7.11.0 Command line: /volume1/@appstore/EmbyServer/system/EmbyServer.dll -programdata /var/packages/EmbyServer/var -ffdetect /var/packages/EmbyServer/target/bin/ffdetect -ffmpeg /var/packages/EmbyServer/target/bin/ffmpeg -ffprobe /var/packages/EmbyServer/target/bin/ffprobe -nolocalportconfig -ignore_vaapi_enabled_flag -pidfile /var/packages/EmbyServer/var/EmbyServer.pid -defaultdirectory /volume1/Public -updatepackage emby-server-synology7_{version}_x86_64.spk -noautorunwebapp Operating system: Linux version 4.4.180+ (root@build1) (gcc version 8.5.0 (GCC) ) #42962 SMP Fri Feb 10 16:34:17 CST 2023 Framework: .NET 6.0.8 OS/Process: x64/x64 Runtime: volume1/@appstore/EmbyServer/system/System.Private.CoreLib.dll Processor count: 8 Data path: /var/packages/EmbyServer/var Application path: /volume1/@appstore/EmbyServer/system System.IO.DirectoryNotFoundException: System.IO.DirectoryNotFoundException: Could not find a part of the path '/var/packages/EmbyServer/var/data\collections'. at System.IO.Enumeration.FileSystemEnumerator`1.CreateDirectoryHandle(String path, Boolean ignoreNotFound) at System.IO.Enumeration.FileSystemEnumerator`1.Init() at System.IO.Enumeration.FileSystemEnumerator`1..ctor(String directory, Boolean isNormalized, EnumerationOptions options) at System.IO.Enumeration.FileSystemEnumerable`1..ctor(String directory, FindTransform transform, EnumerationOptions options, Boolean isNormalized) at System.IO.Enumeration.FileSystemEnumerableFactory.FileSystemInfos(String directory, String expression, EnumerationOptions options, Boolean isNormalized) at System.IO.DirectoryInfo.InternalEnumerateInfos(String path, String searchPattern, SearchTarget searchTarget, EnumerationOptions options) at System.IO.DirectoryInfo.EnumerateFileSystemInfos(String searchPattern, SearchOption searchOption) at Emby.Server.Implementations.IO.ManagedFileSystem.GetFileSystemEntries(String path, Boolean recursive) at MediaBrowser.Controller.Providers.DirectoryService.GetFileSystemEntries(String path, Boolean clearCache) at MediaBrowser.Controller.Providers.DirectoryService.GetFileSystemEntries(String path) at MediaBrowser.Controller.Entities.BaseItem.GetFileSystemChildren(IDirectoryService directoryService) at MediaBrowser.Controller.Entities.Folder.GetNonCachedChildren(IDirectoryService directoryService, LibraryOptions libraryOptions) at MediaBrowser.Controller.Entities.Folder.ValidateChildrenInternal(IProgress`1 progress, CancellationToken cancellationToken, Boolean recursive, Boolean refreshChildMetadata, MetadataRefreshOptions refreshOptions, IDirectoryService directoryService) at MediaBrowser.Controller.Entities.Folder.ValidateSubFolders(BaseItem[] children, IDirectoryService directoryService, IProgress`1 progress, CancellationToken cancellationToken) Source: System.Private.CoreLib TargetSite: IntPtr CreateDirectoryHandle(System.String, Boolean) I've seen a lot of these System IO errors in the log as of late, and tried to fix some by following the article below, but the issues still persist. Additionally, DSM7 has no options to schedule a task based on event such as boot-up. I'm happy to privately provide a server debug log to those who want to view the entire contents and help me out. I'm not going to share it here. Thanks in advance, friends! - Arly

Hey, I would like to move individual libraries from volume 1 to volume 2. How do I get all metadata including the added date and seen status to be included? I found one or two posts, but they talk about reinstalling Emby. I don't want to move all libraries including Emby, just individual libraries. Greets Dicken

Hello everyone, I'm a new emby user since a week or two. But there is a problem that keeps occuring. When a streamed a video to my chromecast it showed subtitles, but this was only the first day. Now when I try to stream the same movie (or other) it doesn't show any subtitles. When I pauze the video on mobile when it shows a subtitle and than stream it, it will show that sentence for a split second and nothing after. Context: - I run my emby server on a synology - I use opensubtitles as automatic source - self added subtitles are having the correct naming (showed at the ? in emby) - I have searched the forum but didn't come across some solution Thanks for helping.

Hello, I have a Emby Server instance running on Debian 11 with my libraries on a Synology NAS connected by NFS shares. After upgrading my Synology NAS to DSM 7.x my Emby server can no longer read nor write to the NAS libraries. Emby log attached. Oddly, Emby does not seem able to connect to either SiliconDust network attached tuners which may imply the issue is not NAS permissions related but something with Emby Server itself. Debian Ver. = 11 Emby Server Ver. = 4.7.14.0 Synology DSM Ver. = 7.1.1-42962 embyserver.txt

hi even I know now (and I'm not an it guy..) that we cannot change the http port on a emby server installation with the emby app (no docker). I'm the network settings we have only the puplic ports. via ssh I was to stupid. I even managed to open the config file but it was read only so I couldn't change. does someone know why the xxx the port is still blocked for another installation (used is impossible?) after I deleted the emby app and restartet the nas. is that really possible?? any idea / help is much appreciated!!!

Tengo un NAS Synology DS1815+ con DSM 7. Tenía instalado Emby Server 4.7.11.0 y lo he desinstalado para volver a instalarlo en otro volumen del NAS, tras la nueva instalación el servidor Emby no permite ser ejecutado, la ejecución se detiene al momento sin llegar a poder abrir la web del servidor. He podido recuperar el log desde SSH, lo adjunto para ver si pueden ayudarme a saber porque no puedo volver a ejecutar mi Emby Server: 2023-09-14 16:57:13.469 Info Main: Application path: /volume1/@appstore/EmbyServer/system/EmbyServer.dll 2023-09-14 16:57:14.073 Info Main: Emby Command line: /volume1/@appstore/EmbyServer/system/EmbyServer.dll -programdata /var/packages/EmbyServer/var -ffdetect /var/packages/EmbyServer/target/bin/ffdetect -ffmpeg /var/packages/EmbyServer/target/bin/ffmpeg -ffprobe /var/packages/EmbyServer/target/bin/ffprobe -nolocalportconfig -ignore_vaapi_enabled_flag -pidfile /var/packages/EmbyServer/var/EmbyServer.pid -defaultdirectory /volume1/Public -updatepackage emby-server-synology7_{version}_x86_64.spk Operating system: Linux version 3.10.108 (root@build3) (gcc version 8.5.0 (GCC) ) #42962 SMP Mon May 29 14:36:28 CST 2023 Framework: .NET 6.0.8 OS/Process: x64/x64 Runtime: volume1/@appstore/EmbyServer/system/System.Private.CoreLib.dll Processor count: 4 Data path: /var/packages/EmbyServer/var Application path: /volume1/@appstore/EmbyServer/system 2023-09-14 16:57:14.073 Info Main: Logs path: /var/packages/EmbyServer/var/logs 2023-09-14 16:57:14.073 Info Main: Cache path: /var/packages/EmbyServer/var/cache 2023-09-14 16:57:14.074 Info Main: Internal metadata path: /var/packages/EmbyServer/var/metadata 2023-09-14 16:57:14.074 Info Main: Transcoding temporary files path: /var/packages/EmbyServer/var/transcoding-temp 2023-09-14 16:57:14.075 Info Main: PID file: /var/packages/EmbyServer/var/EmbyServer.pid 2023-09-14 16:57:14.214 Info App: Application version: 4.7.10.0 2023-09-14 16:57:14.222 Info App: Loading assemblies 2023-09-14 16:57:14.281 Info App: File /var/packages/EmbyServer/var/plugins/Emby.XmlTV.dll has version 1.0.9.0 2023-09-14 16:57:14.281 Info App: File /volume1/@appstore/EmbyServer/system/plugins/Emby.XmlTV.dll has version 1.0.9.0 2023-09-14 16:57:14.282 Info App: File /var/packages/EmbyServer/var/plugins/Fanart.dll has version 1.0.13.0 2023-09-14 16:57:14.282 Info App: File /volume1/@appstore/EmbyServer/system/plugins/Fanart.dll has version 1.0.13.0 2023-09-14 16:57:14.282 Info App: File /var/packages/EmbyServer/var/plugins/MovieDb.dll has version 1.6.2.0 2023-09-14 16:57:14.282 Info App: File /volume1/@appstore/EmbyServer/system/plugins/MovieDb.dll has version 1.6.2.0 2023-09-14 16:57:14.283 Info App: File /var/packages/EmbyServer/var/plugins/OpenSubtitles.dll has version 1.0.31.0 2023-09-14 16:57:14.283 Info App: File /volume1/@appstore/EmbyServer/system/plugins/OpenSubtitles.dll has version 1.0.31.0 2023-09-14 16:57:14.283 Info App: File /var/packages/EmbyServer/var/plugins/BlurayMounter.dll has version 1.0.0.0 2023-09-14 16:57:14.283 Info App: File /volume1/@appstore/EmbyServer/system/plugins/BlurayMounter.dll has version 1.0.0.0 2023-09-14 16:57:14.284 Info App: File /var/packages/EmbyServer/var/plugins/StudioImages.dll has version 1.0.3.0 2023-09-14 16:57:14.284 Info App: File /volume1/@appstore/EmbyServer/system/plugins/StudioImages.dll has version 1.0.3.0 2023-09-14 16:57:14.284 Info App: File /var/packages/EmbyServer/var/plugins/Emby.Dlna.dll has version 1.0.91.0 2023-09-14 16:57:14.285 Info App: File /volume1/@appstore/EmbyServer/system/plugins/Emby.Dlna.dll has version 1.0.91.0 2023-09-14 16:57:14.285 Info App: File /var/packages/EmbyServer/var/plugins/Emby.Server.CinemaMode.dll has version 1.0.40.0 2023-09-14 16:57:14.285 Info App: File /volume1/@appstore/EmbyServer/system/plugins/Emby.Server.CinemaMode.dll has version 1.0.40.0 2023-09-14 16:57:14.285 Info App: File /var/packages/EmbyServer/var/plugins/MusicBrainz.dll has version 1.0.22.0 2023-09-14 16:57:14.285 Info App: File /volume1/@appstore/EmbyServer/system/plugins/MusicBrainz.dll has version 1.0.22.0 2023-09-14 16:57:14.286 Info App: File /var/packages/EmbyServer/var/plugins/Tvdb.dll has version 1.3.3.0 2023-09-14 16:57:14.286 Info App: File /volume1/@appstore/EmbyServer/system/plugins/Tvdb.dll has version 1.3.3.0 2023-09-14 16:57:14.286 Info App: File /var/packages/EmbyServer/var/plugins/EmbyGuideData.dll has version 1.0.9.0 2023-09-14 16:57:14.286 Info App: File /volume1/@appstore/EmbyServer/system/plugins/EmbyGuideData.dll has version 1.0.9.0 2023-09-14 16:57:14.286 Info App: File /var/packages/EmbyServer/var/plugins/AudioDb.dll has version 1.0.16.0 2023-09-14 16:57:14.287 Info App: File /volume1/@appstore/EmbyServer/system/plugins/AudioDb.dll has version 1.0.16.0 2023-09-14 16:57:14.287 Info App: File /var/packages/EmbyServer/var/plugins/NfoMetadata.dll has version 1.0.70.0 2023-09-14 16:57:14.287 Info App: File /volume1/@appstore/EmbyServer/system/plugins/NfoMetadata.dll has version 1.0.70.0 2023-09-14 16:57:14.287 Info App: File /var/packages/EmbyServer/var/plugins/OMDb.dll has version 1.0.18.0 2023-09-14 16:57:14.287 Info App: File /volume1/@appstore/EmbyServer/system/plugins/OMDb.dll has version 1.0.18.0 2023-09-14 16:57:14.287 Info App: File /var/packages/EmbyServer/var/plugins/DvdMounter.dll has version 1.0.0.0 2023-09-14 16:57:14.288 Info App: File /volume1/@appstore/EmbyServer/system/plugins/DvdMounter.dll has version 1.0.0.0 2023-09-14 16:57:14.311 Info App: Loading Emby.XmlTV, Version=1.0.9.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/Emby.XmlTV.dll 2023-09-14 16:57:14.311 Info App: Loading Fanart, Version=1.0.13.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/Fanart.dll 2023-09-14 16:57:14.311 Info App: Loading MovieDb, Version=1.6.2.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/MovieDb.dll 2023-09-14 16:57:14.311 Info App: Loading OpenSubtitles, Version=1.0.31.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/OpenSubtitles.dll 2023-09-14 16:57:14.312 Info App: Loading BlurayMounter, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/BlurayMounter.dll 2023-09-14 16:57:14.312 Info App: Loading StudioImages, Version=1.0.3.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/StudioImages.dll 2023-09-14 16:57:14.312 Info App: Loading Emby.Dlna, Version=1.0.91.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/Emby.Dlna.dll 2023-09-14 16:57:14.312 Info App: Loading Emby.Server.CinemaMode, Version=1.0.40.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/Emby.Server.CinemaMode.dll 2023-09-14 16:57:14.312 Info App: Loading MusicBrainz, Version=1.0.22.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/MusicBrainz.dll 2023-09-14 16:57:14.313 Info App: Loading Tvdb, Version=1.3.3.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/Tvdb.dll 2023-09-14 16:57:14.313 Info App: Loading EmbyGuideData, Version=1.0.9.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/EmbyGuideData.dll 2023-09-14 16:57:14.313 Info App: Loading AudioDb, Version=1.0.16.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/AudioDb.dll 2023-09-14 16:57:14.313 Info App: Loading NfoMetadata, Version=1.0.70.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/NfoMetadata.dll 2023-09-14 16:57:14.313 Info App: Loading OMDb, Version=1.0.18.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/OMDb.dll 2023-09-14 16:57:14.313 Info App: Loading DvdMounter, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null from /var/packages/EmbyServer/var/plugins/DvdMounter.dll 2023-09-14 16:57:14.313 Info App: Loading Emby.Api, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Web, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading MediaBrowser.Model, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading MediaBrowser.Common, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading MediaBrowser.Controller, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Providers, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Photos, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Server.Implementations, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.LiveTV, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.ActivityLog, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Server.MediaEncoding, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.LocalMetadata, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Notifications, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Codecs.Dxva, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Codecs, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Server.Connect, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading Emby.Server.Sync, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.313 Info App: Loading EmbyServer, Version=4.7.10.0, Culture=neutral, PublicKeyToken=null 2023-09-14 16:57:14.835 Info SqliteUserRepository: Sqlite version: 3.39.2 2023-09-14 16:57:14.837 Info SqliteUserRepository: Sqlite compiler options: ATOMIC_INTRINSICS=1,COMPILER=gcc-10.3.0,DEFAULT_AUTOVACUUM,DEFAULT_CACHE_SIZE=-2000,DEFAULT_FILE_FORMAT=4,DEFAULT_JOURNAL_SIZE_LIMIT=-1,DEFAULT_MMAP_SIZE=0,DEFAULT_PAGE_SIZE=4096,DEFAULT_PCACHE_INITSZ=20,DEFAULT_RECURSIVE_TRIGGERS,DEFAULT_SECTOR_SIZE=4096,DEFAULT_SYNCHRONOUS=2,DEFAULT_WAL_AUTOCHECKPOINT=1000,DEFAULT_WAL_SYNCHRONOUS=2,DEFAULT_WORKER_THREADS=0,ENABLE_COLUMN_METADATA,ENABLE_DBSTAT_VTAB,ENABLE_FTS3,ENABLE_FTS3_PARENTHESIS,ENABLE_FTS3_TOKENIZER,ENABLE_FTS4,ENABLE_FTS5,ENABLE_GEOPOLY,ENABLE_MATH_FUNCTIONS,ENABLE_PREUPDATE_HOOK,ENABLE_RTREE,ENABLE_SESSION,ENABLE_UNLOCK_NOTIFY,ENABLE_UPDATE_DELETE_LIMIT,LIKE_DOESNT_MATCH_BLOBS,MALLOC_SOFT_LIMIT=1024,MAX_ATTACHED=10,MAX_COLUMN=2000,MAX_COMPOUND_SELECT=500,MAX_DEFAULT_PAGE_SIZE=8192,MAX_EXPR_DEPTH=1000,MAX_FUNCTION_ARG=127,MAX_LENGTH=1000000000,MAX_LIKE_PATTERN_LENGTH=50000,MAX_MMAP_SIZE=0x7fff0000,MAX_PAGE_COUNT=1073741823,MAX_PAGE_SIZE=65536,MAX_SCHEMA_RETRY=25,MAX_SQL_LENGTH=1000000000,MAX_TRIGGER_DEPTH=1000,MAX_VARIABLE_NUMBER=250000,MAX_VDBE_OP=250000000,MAX_WORKER_THREADS=8,MUTEX_PTHREADS,OMIT_LOOKASIDE,SECURE_DELETE,SYSTEM_MALLOC,TEMP_STORE=1,THREADSAFE=1 2023-09-14 16:57:14.838 Info SqliteUserRepository: Opening sqlite connection to /var/packages/EmbyServer/var/data/users.db 2023-09-14 16:57:14.882 Info SqliteUserRepository: Default journal_mode for /var/packages/EmbyServer/var/data/users.db is wal 2023-09-14 16:57:15.160 Info ActivityRepository: Opening sqlite connection to /var/packages/EmbyServer/var/data/activitylog.db 2023-09-14 16:57:15.162 Info ActivityRepository: Default journal_mode for /var/packages/EmbyServer/var/data/activitylog.db is wal 2023-09-14 16:57:15.177 Info SqliteDisplayPreferencesRepository: Opening sqlite connection to /var/packages/EmbyServer/var/data/displaypreferences.db 2023-09-14 16:57:15.178 Info SqliteDisplayPreferencesRepository: Default journal_mode for /var/packages/EmbyServer/var/data/displaypreferences.db is wal 2023-09-14 16:57:15.210 Info App: Adding HttpListener prefix http://+:8096/ 2023-09-14 16:57:15.246 Info NetworkManager: Detecting local network addresses 2023-09-14 16:57:15.246 Info NetworkManager: networkInterface: Ethernet eth0, Speed: 1000000000, Description: eth0 2023-09-14 16:57:15.247 Info NetworkManager: GatewayAddresses: 2023-09-14 16:57:15.248 Info NetworkManager: UnicastAddresses: 2023-09-14 16:57:15.248 Info NetworkManager: networkInterface: Ethernet eth1, Speed: 1000000000, Description: eth1 2023-09-14 16:57:15.248 Info NetworkManager: GatewayAddresses: 2023-09-14 16:57:15.248 Info NetworkManager: UnicastAddresses: 2023-09-14 16:57:15.248 Info NetworkManager: networkInterface: Ethernet bond0, Speed: 2000000000, Description: bond0 2023-09-14 16:57:15.248 Info NetworkManager: GatewayAddresses: 192.168.1.1 2023-09-14 16:57:15.249 Info NetworkManager: UnicastAddresses: 192.168.1.8,fe80::211:32ff:fe40:abd7%7 2023-09-14 16:57:15.250 Info NetworkManager: networkInterface: Loopback lo, Speed: -1, Description: lo 2023-09-14 16:57:15.250 Info NetworkManager: GatewayAddresses: 2023-09-14 16:57:15.250 Info NetworkManager: UnicastAddresses: 127.0.0.1,::1 2023-09-14 16:57:15.253 Info NetworkManager: Detected local ip addresses: 192.168.1.8, fe80::211:32ff:fe40:abd7%7, 127.0.0.1, ::1 2023-09-14 16:57:15.589 Debug XmlSerializer: Deserializing file /var/packages/EmbyServer/var/config/users/6918fa36d13c448eb10dfadab579e35e/policy.xml 2023-09-14 16:57:15.726 Info AuthenticationRepository: Opening sqlite connection to /var/packages/EmbyServer/var/data/authentication.db 2023-09-14 16:57:15.727 Info AuthenticationRepository: Default journal_mode for /var/packages/EmbyServer/var/data/authentication.db is wal 2023-09-14 16:57:15.735 Info SqliteItemRepository: Opening sqlite connection to /var/packages/EmbyServer/var/data/library.db 2023-09-14 16:57:16.324 Info SqliteItemRepository: Default journal_mode for /var/packages/EmbyServer/var/data/library.db is wal 2023-09-14 16:57:16.326 Info SqliteItemRepository: cache_size is -122880 2023-09-14 16:57:16.326 Info SqliteItemRepository: page_size is 4096 2023-09-14 16:57:21.945 Error Main: Error in appHost.Init *** Error Report *** Version: 4.7.10.0 Command line: /volume1/@appstore/EmbyServer/system/EmbyServer.dll -programdata /var/packages/EmbyServer/var -ffdetect /var/packages/EmbyServer/target/bin/ffdetect -ffmpeg /var/packages/EmbyServer/target/bin/ffmpeg -ffprobe /var/packages/EmbyServer/target/bin/ffprobe -nolocalportconfig -ignore_vaapi_enabled_flag -pidfile /var/packages/EmbyServer/var/EmbyServer.pid -defaultdirectory /volume1/Public -updatepackage emby-server-synology7_{version}_x86_64.spk Operating system: Linux version 3.10.108 (root@build3) (gcc version 8.5.0 (GCC) ) #42962 SMP Mon May 29 14:36:28 CST 2023 Framework: .NET 6.0.8 OS/Process: x64/x64 Runtime: volume1/@appstore/EmbyServer/system/System.Private.CoreLib.dll Processor count: 4 Data path: /var/packages/EmbyServer/var Application path: /volume1/@appstore/EmbyServer/system SQLitePCL.pretty.SQLiteException: Error: no such column: IsFolder - create index if not exists idx_MediaItems36 on MediaItems(SeriesPresentationUniqueKey,Type,IsFolder,IsVirtualItem) where SeriesPresentationUniqueKey not null;create index if not exists idx_MediaItems10 on MediaItems(Type,TopParentId,Id);create index if not exists idx_MediaItems11 on MediaItems(Type,TopParentId,PresentationUniqueKey);create index if not exists idx_MediaItems46 on MediaItems(TopParentId,IsVirtualItem) where TopParentId not null;create index if not exists idx_MediaItems47 on MediaItems(TopParentId,Type,IsVirtualItem,PresentationUniqueKey,DateCreated) where TopParentId not null;create index if not exists idx_MediaItems48 on MediaItems(TopParentId,IsFolder,IsVirtualItem,PresentationUniqueKey,DateCreated) where TopParentId not null;create index if not exists idx_MediaItems49 on MediaItems(TopParentId,MediaType,IsVirtualItem,PresentationUniqueKey) where TopParentId not null;create index if not exists idx_MediaItems50 on MediaItems(Type, TopParentId, AlbumId) where TopParentId not null;create index if not exists idx_MediaItems51 on MediaItems(Type,IsSeries) where Type=27;create index if not exists idxItemLinks_1 on ItemLinks(LinkedId, Type, ItemId) SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown. at SQLitePCL.pretty.SQLiteDatabaseConnection.PrepareStatement(String sql, String& tail) at SQLitePCL.pretty.DatabaseConnection.PrepareAllEnumerator(IDatabaseConnection This, String sql)+MoveNext() at SQLitePCL.pretty.DatabaseConnection.ExecuteAll(IDatabaseConnection This, String sql) at Emby.Server.Implementations.Data.SqliteItemRepository.Initialize(SqliteUserDataRepository userDataRepo, IUserManager userManager) at Emby.Server.Implementations.ApplicationHost.InitDatabases() at Emby.Server.Implementations.ApplicationHost.Init() at EmbyServer.HostedService.StartAsync(CancellationToken cancellationToken) Source: SQLitePCL.pretty TargetSite: SQLitePCL.pretty.IStatement PrepareStatement(System.String, System.String ByRef)

Just set up my new NAS and installed the Emby package. I've copied over my media shares from my old WD MyCloud and set the permissions for the System Internal emby user. I have not yet restored the backup from my old Windows Emby server. When I go to add a library it says it can't find the folder. I can access the folder from a Windows client with no issues so I'm not sure what I'm doing wrong. Is there a guide/tutorial that goes through the server config on Synology step by step? I'm guessing I'm missing something very simple.

Today I installed DSM7.2 beta on my Synology. I observed immediately that Emby wasn't running anymore. On my machine is installed emby-server-synology7_4.8.0.26_x86_64.spk. What should I do now? Can I install package emby-server-synology72_4.8.0.26_x86_64.spk without problems? Or should I wait till version 4.8.27 is coming available for x86-64 machines?

Hello, I am following this guide to tweak some settings in my server, and I've run into a question. How can I verify the size of library.db. I'm using Synology DSM 7.0. Tagging @Happy2Playfor visibility, as he created the original guide. Thanks.

Hallo, ich habe das Problem, dass eine neue Serie, die ich in den Media Ordner geschoben habe, nicht in der Serienübersicht erscheint. Emby erstellt die nfo Dateien korrekt, erkennt also die Serie korrekt. Jedoch wird sie weder im "Metadatenmanager" noch unter Serien angezeigt. Ich habe schon versucht die Bibliotheken zu scannen und habe auch nach fehlenden Metadaten gesucht. Auch ein Neustart des Emby Servers hat keinen Erfolg gebracht. Könnt Ihr mir weiterhelfen? Emby ServerVersion 4.7.11.0 Synology DS1618+

Hallo an Alle! Ich habe mir die emby Software in der letzten Woche auf meine Synology Diskstation installiert, einen externen Zugriff eingerichtet und läuft soweit. Der erste Eindruck war so gut, dass ich mich zum Sponsern über die Lifetime Lizens hab hinreißen lassen. In den Einstellungen unter Startseite habe ich mir die Liste so angepasst, dass auch Weiterhören dort auftaucht. Aber egal was ich höre, Wiedergabe eines Musik-Albums, einer Playlist, eines Hörbuches... nie wird mir Weiterhören angeboten. Bei Serien und Filmen wird Weiterschauen aber angeboten. Woran kann das liegen?

Using DSM 6 - Can't seem to find it. Please help Thank You

I m currently running Emby version 4.6.4.0 inside Docker on Synology version 7.0.41890. I would like to eliminate the Docker component, and run the native Emby app that is found in the Synology package. For movies and TV shows, the metadata is in the save folders. For music and books, it is in the Mysql database. My libraries are huge. Does anyone have experience with this type of migration and if so what can I expect?