Emby on Ubuntu 26.10

Each time emby server is updated, my collections will no more hold together.

I have to almost start all over, grouping my mkv.

Is there anyway to prevent this from occuring ?

thanks.

George Omoregie.

I have a question about the on-screen display when playing a music album.

If i start playing an album the screen shows the backdrop (artist from library) and the front cover of the album, which is same for all songs. Thats nice like that.

Then after 60 sec. of playing the screen changes to still have the backdrop and now only the name of the song playing with a big cover of the album in the middle of the screen.

This is also nice, but is it possible to move that front cover away from the middle of the screen, and also change the size of it...??

I think it is a little sad with that big cover in the middle of the screen due to that it is actually destroying your backdrop.

I didnt use emby so much the latest time, but i started again now from a new server, so maybe there is something in the settings that I could try out regarding that.

Cheers

On transcoded playback, pausing and resuming causes the video to "jump back" and replay a few seconds, after which the subtitles are permanently out of sync for the rest of playback. It recurs on every pause/resume cycle and the jump back usually occurs within 30 seconds of resuming (Running out a client-side cache?). Selecting a different subtitle track during playback re-aligns everything until the next pause/resume cycle, at which point it happens again. If only one subtitle track exists, the video must be stopped and restarted to re-sync everything. 

The logs suggest that upon resume, emby relaunches the transcode process with a seek offset which is probably causing the noticeable jump back, but the subtitle stream doesn't get the memo. You also can't turn the current subtitle track "off and back on" as a solution. You have to do something that causes the server to re-issue the subtitle stream for the current position. So I guess turning off a subtitle track just disables the visual display but the stream stays alive somewhere and never gets corrected. Re-displaying it just shows the same stream with the same problem.

I'd prefer to send log files via PM. I have the server log for the time in question as well as four ffmpeg jobs. All available upon request.

I have enabled the generate intro video markers for all the libraries.

• Generate intro video markers → scheduled task enabled & when file is added” enabled

Issue Example:
For Slow Horses – Season 1 (6 episodes):

• No Skip Intro button appears when playing.

• Intro normally starts at ~4–5 minutes into the video (well within the 10-minute cutoff).

• Season 1 meets the minimum requirement  of 2 episodes I have 6 episodes.

• Video thumbnails have already been generated successfully.

• I manually ran Detect Intro Video Markers task → finishes instantly (0 seconds), suggesting it thinks markers already exist or nothing to do.

Expectation:
Skip Intro markers should be generated and visible for Slow Horses S01E01–E06.

What I Tried:

• Verified video thumbnails exist for the episodes.

• Manually ran the scheduled task multiple times.

• Rescanned the library.

• Confirmed minimum episode count is met and intro is within first 10 min.

Just FYI if this is any useful information - plex detected the intro for all.

I tried playing the video on a computer and another phone. And it's tilted to the side on both devices. 

I prefer it is just music , select and hear it lol

If i delete with mp3tag the tag for artists and scan a new library ,emby removes artists from its page. ( i am not talking for 

Now when I do the same with composers tag , emby keep displaying a Composers empty field.

I have those enabled 

ALBUM,ALBUMARTIST,DISCNUMBER,GENRE,TITLE,TRACK,YEAR

So why i have a composers field in emby, my library is just local nothing fetching from internet and just fetching the id3v2 tags.

Aug 01 11:13:33 Emby sh[1632]: /bin/sh: /opt/emby-server/lib/libc.so.6: version `GLIBC_2.33' not found (required by /bin/sh)

Aug 01 11:13:33 Emby sh[1632]: /bin/sh: /opt/emby-server/lib/libc.so.6: version `GLIBC_2.34' not found (required by /bin/sh)

And of course the service fails to start.  This is on Debian 6.12.94-1 (2026-06-20) x86_64 (not docker)
I saw this trying to upgrade from 4.9.3.0 to 4.9.4.0 and to 4.9.5.0

I'm in the process of migrating of Emby server. My only issue is to migrate my Music Playlist. The "old" Emby installation was still using a m3u file for that playlist so I copied it at same place in new Emby installation. Unhappy even after a Music library scan and metadatas update the playlist still doesn't show up

I have found some explanations about m3u transfer but it looks like it was working only on old releases of Emby and it's no more possible with current version ?

Does it mean it's impossible to transfer a playlist from an Emby server to an other one ?

Thanks for clarification

I'm running emby 4.9.5.0, and this option is not working for me. I'm testing this out. I manually add an episode and let it show up in the "Latest" section for that library. However, unless I go to "Scheduled Tasks" and run "Detect Episode Intros", the skip intro button does not show up. When I manually run the "Detect Episode Intros" task, it's instant. 

Am I missing something? 

Thank you

I did check the logs for any information on why this is happening. There seems to be an error which I can't really make out what it means right before the log stops (Logs attached). At first I thought it was an error that occured because of my reverse proxy setup, however the same thing happens when I stream through the local network. 

I did once have a similar issue that I could resolve by changing the transcoding settings to only use QuickSync instead of VA API and QuickSync.

The driver for my GPU seems to be installed and loaded, however the output to the Command lspci -k | grep -A 2 VGA  outputs no kernel driver in use:

00:02.0 VGA compatible controller: Intel Corporation Iris Plus Graphics 650 (rev 06)
        DeviceName: Onboard - Video
        Subsystem: Intel Corporation Iris Plus Graphics 650

Also of note: Running any glx commands in the console gives me the following error:

Error: unable to open display

I'm kind of at a loss here and don't know what to do. If anyone can help me with this would be nice, I have absolutely no clue how to make this work, especially since I don't really understand much about transcoding or hardware drivers. If I can add any more information to help solve this let me know!

Thanks in advance!

embyserver-63921916800.txt

File permissions for Linux native filesystems

The first thing you need to understand is how Linux determines the file permissions for any file on a compatible file system, e.g. ext4, ext3, xfs, btrfs, etc.  You can view the current file permissions by typing

ls -l /path/to/media

Doing so should leave you with output like

drwxr-xr-x. 2 emby users 4096 Dec 22 23:05 Transporter 3 (2008)
drwxrwxr-x. 2 emby users 4096 Dec 22 23:09 Transporter, The (2002)
drwxrwxr-x. 2 emby users 4096 Dec 22 23:03 Van Helsing (2004)
drwxr-xr-x. 2 emby users 4096 Dec 22 23:01 Veronica Mars (2014)
drwxrwxr-x. 2 emby users 4096 Dec 22 23:11 V for Vendetta (2005)
drwxr-xr-x. 2 emby users 4096 Dec 22 23:12 WALL·E (2008)
drwxr-xr-x. 2 emby users 4096 Dec 22 23:10 Whiplash (2014)

WORD OF CAUTION: all drives in the fstab MUST be available to the system at all times.  If a drive is in the fstab but not available at boot, the boot sequence will drop to a rescue shell.

2026-08-06 17:09:05.216 Error ProviderManager: Error validating children for W 116964 /discos/Peliculas/Pelis/W
        *** Error Report ***
        Version: 4.9.5.0
        Command line: /opt/emby-server/system/EmbyServer.dll -programdata /var/lib/emby -ffdetect /opt/emby-server/bin/ffdetect -ffmpeg /opt/emby-server/bin/ffmpeg -ffprobe /opt/emby-server/bin/ffprobe -restartexitcode 3 -updatepackage emby-server-deb_{version}_amd64.deb
        Operating system: Linux version 6.8.12-22-pve (build@proxmox) (gcc (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC PMX
        OS/Process: x64/x64
        Framework: .NET 8.0.25
        Runtime: opt/emby-server/system/System.Private.CoreLib.dll
        Processor count: 2
        Data path: /var/lib/emby
        Application path: /opt/emby-server/system
        System.NullReferenceException: System.NullReferenceException: Object reference not set to an instance of an object.
           at Emby.Naming.Video.VideoListResolver.GetVideosGroupedByVersion(List`1 videos, VideoResolver videoResolver, Boolean supportMultiVersion)
           at Emby.Naming.Video.VideoListResolver.ResolveToResult(List`1 files, Boolean supportMultiVersion, Boolean parseName, Boolean isMixedFolder)
           at Emby.Server.Implementations.Library.Resolvers.VideoResolver.ResolveVideos[T](IEnumerable`1 files, Folder parent, IDirectoryService directoryService, Boolean supportMultiEditions, Boolean supportsMultiParts, BaseItem[] collectionFolders, LibraryOptions libraryOptions, Boolean parseName, Boolean checkSubFolders)
           at Emby.Server.Implementations.Library.Resolvers.VideoResolver.FindMovie[T](FileSystemMetadata[] fileSystemEntries, Folder parent, IDirectoryService directoryService, BaseItem[] collectionFolders, LibraryOptions libraryOptions, Boolean supportsMultiVersion, Boolean supportsMultiPart, Boolean parseName)
           at Emby.Server.Implementations.Library.Resolvers.VideoResolver.ResolveVideos[T](IEnumerable`1 files, Folder parent, IDirectoryService directoryService, Boolean supportMultiEditions, Boolean supportsMultiParts, BaseItem[] collectionFolders, LibraryOptions libraryOptions, Boolean parseName, Boolean checkSubFolders)
           at Emby.Server.Implementations.Library.Resolvers.VideoResolver.ResolveMultipleInternal(Folder parent, List`1 files, List`1 originalFiles, LibraryOptions libraryOptions, BaseItem[] collectionFolders, IDirectoryService directoryService)
           at MediaBrowser.Controller.Resolvers.BaseItemResolver`1.ResolveMultiple(Folder parent, List`1 files, List`1 originalFiles, LibraryOptions libraryOptions, BaseItem[] collectionFolders, IDirectoryService directoryService)
           at Emby.Server.Implementations.Library.LibraryManager.ResolvePaths(FileSystemMetadata[] files, IDirectoryService directoryService, Folder parent, BaseItem[] collectionFolders, LibraryOptions libraryOptions)
           at MediaBrowser.Controller.Entities.BaseItem.ValidateChildrenInternal(IProgress`1 progress, CancellationToken cancellationToken, Boolean recursive, Boolean refreshChildMetadata, BaseItem[] collectionFolders, LibraryOptions libraryOptions, Dictionary`2 newItemIds, MetadataRefreshOptions refreshOptions, IDirectoryService directoryService)
           at Emby.Providers.Manager.ProviderManager.RefreshCollectionFolderChildren(MetadataRefreshOptions options, CollectionFolder collectionFolder, CancellationToken cancellationToken)
        Source: Emby.Naming
        TargetSite: System.Collections.Generic.List`1[Emby.Naming.Video.VideoInfo] GetVideosGroupedByVersion(System.Collections.Generic.List`1[Emby.Naming.Video.VideoInfo], Emby.Naming.Video.VideoResolver, Boolean)

What can i do to solve it?

Thank you

embyserver.txt

I’ve attached a Google Drive link with a video demonstrating the problem, along with my Emby server logs and screenshots of my subtitle settings. Any assistance would be greatly appreciated.

https://drive.google.com/file/d/1W4zoAV5S47cztOvZm7VdQ15ClIe6Y2qO/view?usp=sharing

 

embyserver.txt

text  error  warn  system  array  login  

Info App: Loading Emby.Webhooks, Version=1.0.38.0, Culture=neutral, PublicKeyToken=null from /config/plugins/Emby.Webhooks.dll
Info App: Loading MusicBrainz, Version=1.0.28.0, Culture=neutral, PublicKeyToken=null from /config/plugins/MusicBrainz.dll
Info App: Loading StudioImages, Version=1.0.3.0, Culture=neutral, PublicKeyToken=null from /config/plugins/StudioImages.dll
Info App: Loading BlurayMounter, Version=1.0.5.0, Culture=neutral, PublicKeyToken=null from /config/plugins/BlurayMounter.dll
Info App: Loading DvdMounter, Version=1.0.2.0, Culture=neutral, PublicKeyToken=null from /config/plugins/DvdMounter.dll
Info SqliteUserRepository: Initializing PooledDatabaseConnectionManager with pool size: 3
Info SqliteUserRepository: Sqlite version: 3.49.2
Info SqliteUserRepository: Sqlite compiler options: ATOMIC_INTRINSICS=1,COMPILER=gcc-10.3.0,DEFAULT_AUTOVACUUM,DEFAULT_CACHE_SIZE=-2000,DEFAULT_FILE_FORMAT=4,DEFAULT_JOURNAL_SIZE_LIMIT=-1,DEFAULT_MMAP_SIZE=0,DEFAULT_PAGE_SIZE=4096,DEFAULT_PCACHE_INITSZ=20,DEFAULT_RECURSIVE_TRIGGERS,DEFAULT_SECTOR_SIZE=4096,DEFAULT_SYNCHRONOUS=2,DEFAULT_WAL_AUTOCHECKPOINT=1000,DEFAULT_WAL_SYNCHRONOUS=2,DEFAULT_WORKER_THREADS=0,DIRECT_OVERFLOW_READ,ENABLE_COLUMN_METADATA,ENABLE_FTS3_PARENTHESIS,ENABLE_FTS3_TOKENIZER,ENABLE_FTS5,ENABLE_MATH_FUNCTIONS,ENABLE_UPDATE_DELETE_LIMIT,LIKE_DOESNT_MATCH_BLOBS,MALLOC_SOFT_LIMIT=1024,MAX_ATTACHED=10,MAX_COLUMN=2000,MAX_COMPOUND_SELECT=500,MAX_DEFAULT_PAGE_SIZE=8192,MAX_EXPR_DEPTH=1000,MAX_FUNCTION_ARG=1000,MAX_LENGTH=1000000000,MAX_LIKE_PATTERN_LENGTH=50000,MAX_MMAP_SIZE=0x7fff0000,MAX_PAGE_COUNT=0xfffffffe,MAX_PAGE_SIZE=65536,MAX_SCHEMA_RETRY=25,MAX_SQL_LENGTH=1000000000,MAX_TRIGGER_DEPTH=1000,MAX_VARIABLE_NUMBER=250000,MAX_VDBE_OP=250000000,MAX_WORKER_THREADS=8,MUTEX_PTHREADS,OMIT_LOOKASIDE,OMIT_SHARED_CACHE,SYSTEM_MALLOC,TEMP_STORE=1,THREADSAFE=1
Info SqliteUserRepository: Sqlite ThreadSafe: 1
Info SqliteUserRepository: Sqlite ThreadingMode: MultiThreaded
Info SqliteUserRepository: Opening sqlite connection to /config/data/users.db. isReadOnly: False
Info SqliteUserRepository: Default journal_mode for /config/data/users.db is wal
Info SqliteUserRepository: PRAGMA cache_size=-65536
Info SqliteUserRepository: PRAGMA page_size=4096
Info SqliteUserRepository: PRAGMA foreign_keys=1
Info SqliteUserRepository: PRAGMA SECURE_DELETE=0
Info SqliteUserRepository: Result of setting SQLITE_DBCONFIG_DQS_DDL to 0 is 0
Info SqliteUserRepository: Result of setting SQLITE_DBCONFIG_DQS_DML to 0 is 0
Info SqliteItemRepository: Initializing PooledDatabaseConnectionManager with pool size: 5
Info AuthenticationRepository: Initializing PooledDatabaseConnectionManager with pool size: 5
Info ActivityRepository: Initializing PooledDatabaseConnectionManager with pool size: 3
Info ActivityRepository: Opening sqlite connection to /config/data/activitylog.db. isReadOnly: False
Info ActivityRepository: Default journal_mode for /config/data/activitylog.db is wal
Info ActivityRepository: PRAGMA cache_size=-65536
Info ActivityRepository: PRAGMA page_size=4096
Info ActivityRepository: PRAGMA foreign_keys=1
Info ActivityRepository: PRAGMA SECURE_DELETE=0
Info ActivityRepository: Result of setting SQLITE_DBCONFIG_DQS_DDL to 0 is 0
Info ActivityRepository: Result of setting SQLITE_DBCONFIG_DQS_DML to 0 is 0
Info NetworkManager: Detecting local network addresses
Info NetworkManager: networkInterface: Ethernet eth0, Speed: 10000000000, Description: eth0
Info NetworkManager: GatewayAddresses: 172.18.0.1
Info NetworkManager: UnicastAddresses: 172.18.0.13
Info NetworkManager: networkInterface: Loopback lo, Speed: -1, Description: lo
Info NetworkManager: GatewayAddresses: 
Info NetworkManager: UnicastAddresses: 127.0.0.1,::1
Info NetworkManager: Detected local ip addresses: [{"IPAddress":"172.18.0.13","HasGateWayAddress":true,"PrefixLength":16,"IPv4Mask":"255.255.0.0"},{"IPAddress":"127.0.0.1","HasGateWayAddress":false,"PrefixLength":8,"IPv4Mask":"255.0.0.0"},{"IPAddress":"::1","HasGateWayAddress":false,"PrefixLength":128}]
Info ServerConfigurationManager: Saving system configuration
Debug XmlSerializer: Serializing to file /config/config/system.xml
Info App: Begin vacuuming SqliteItemRepository
Info SqliteItemRepository: Opening sqlite connection to /config/data/library.db. isReadOnly: False
Info SqliteItemRepository: Default journal_mode for /config/data/library.db is wal
Info SqliteItemRepository: PRAGMA cache_size=-131072
Info SqliteItemRepository: PRAGMA page_size=4096
Info SqliteItemRepository: PRAGMA foreign_keys=1
Info SqliteItemRepository: PRAGMA SECURE_DELETE=0
Info SqliteItemRepository: Result of setting SQLITE_DBCONFIG_DQS_DDL to 0 is 0
Info SqliteItemRepository: Result of setting SQLITE_DBCONFIG_DQS_DML to 0 is 0
Info App: Completed vacuuming SqliteItemRepository after 1712ms
Info App: Begin vacuuming SqliteUserRepository
Info App: Completed vacuuming SqliteUserRepository after 2ms
Info App: Begin vacuuming AuthenticationRepository
Info AuthenticationRepository: Opening sqlite connection to /config/data/authentication.db. isReadOnly: False
Info AuthenticationRepository: Default journal_mode for /config/data/authentication.db is wal
Info AuthenticationRepository: PRAGMA cache_size=-65536
Info AuthenticationRepository: PRAGMA page_size=4096
Info AuthenticationRepository: PRAGMA foreign_keys=1
Info AuthenticationRepository: PRAGMA SECURE_DELETE=0
Info AuthenticationRepository: Result of setting SQLITE_DBCONFIG_DQS_DDL to 0 is 0
Info AuthenticationRepository: Result of setting SQLITE_DBCONFIG_DQS_DML to 0 is 0
Info App: Completed vacuuming AuthenticationRepository after 23ms
Info App: Begin vacuuming ActivityRepository
Error Main: Error in appHost.Init
        *** Error Report ***
        Version: 4.9.5.0
        Command line: /system/EmbyServer.dll -programdata /config -ffdetect /bin/ffdetect -ffmpeg /bin/ffmpeg -ffprobe /bin/ffprobe -restartexitcode 3
        Operating system: Linux version 6.12.54-Unraid (root@Develop) (gcc (GCC) 15.2.0, GNU ld version 2.45-slack151) #1 SMP PREEMPT_DYNAMIC Tue Oct 21 15:58:46 PDT 2025
        OS/Process: x64/x64
        Framework: .NET 8.0.25
        Runtime: system/System.Private.CoreLib.dll
        Processor count: 4
        Data path: /config
        Application path: /system
        SQLitePCL.pretty.SQLiteException: Corrupt: database disk image is malformed
        SQLitePCL.pretty.SQLiteException: Exception of type 'SQLitePCL.pretty.SQLiteException' was thrown.
           at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3 db, Int32 rc)
           at SQLitePCL.pretty.SQLiteException.CheckOk(sqlite3_stmt stmt, Int32 rc)
           at SQLitePCL.pretty.StatementImpl.MoveNext()
           at SQLitePCL.pretty.DatabaseConnection.Execute(IDatabaseConnection This, String sql)
           at Emby.Sqlite.BaseSqliteRepository.Vacuum()
           at Emby.Server.Implementations.ApplicationHost.VacuumDatabase(BaseSqliteRepository db)
           at Emby.Server.Implementations.ApplicationHost.VacuumDatabases()
           at Emby.Server.Implementations.ApplicationHost.RegisterResources()
           at Emby.Server.Implementations.ApplicationHost.Init()
           at EmbyServer.HostedService.StartAsync(CancellationToken cancellationToken)
        Source: SQLitePCL.pretty
        TargetSite: Void CheckOk(SQLitePCLEx.sqlite3, Int32)

Info Main: Shutdown complete
Info LogManager: Disposing Logger

** Press ANY KEY to close this window ** 

Does anyone know how to resolve this? TIA.

Feel free to message me or write if anyone ever needs help setting this up or has any questions. 

On Transcoding page it shows as if hardware acceleration is available:

But once I start playback it falls back to software:

On the other file I tested "Stats for Nerds" showed HW transcoding icon, but there was no tonemapping and in logs I can see it is falling back to software:
 

Playback was on Emby Web in Brave browser. Logs attached.
 

2_ffmpeg-transcode-88b65a00-b581-4570-a4ae-ded178385be6_1.txt embyserver.txt 1_ffmpeg-transcode-90f88052-ff1d-44af-aca3-f6f2b6dcf317_1.txt

I can check "nvidia-smi", which does not show any ongoing process. Also in my router I can clearly see there is much more bandwidth (~10MBps) used than I requested. Stats for nerds also confirms this (direct play), emby server admin also shows direct play. But transcoding log doesnt really show any errors at least I couldn't find any on my phone.

Can you please take a look at it?

ffmpeg-transcode-6a8c6abe-3545-4b24-9dcd-f6bcbbb98a7d_1.txt

index=2

codec_name=unknown

codec_tag_string=[0][0][0][0]

codec_tag=0x0000

index=3

codec_name=unknown

codec_tag_string=[0][0][0][0]

codec_tag=0x0000

in this case，the sever cannot recognize and render the subtitle.

Problem: Hardware encoding via QuickSync only works for bitrates up to 39 Mbit/s.

When the source bitrate exceeds this threshold, Emby falls back to software transcoding (x265), even though the hardware is capable of handling much higher bitrates.

Hardware:

• GPU: Intel Arc A310
• OS: Linux (TrueNAS Scale)

Evidence from Emby's Hardware Encoder Info:

When checking Transcoding Settings → Preferred Hardware Encoders → Info button, I see the following specifications:

HEVC Encoder:

Adapter #0: 'DG2 Arc A310' Id:22182 (Driver: , Vendor: 32902, SDK Version: 1.255)

Max Bitrate: 39 Mbit/s  ← Limited to 39 Mbit/s
Frame Sizes: 32x32...8192x8192
Color Formats: NV12

Profile              Max Level   Max Bitrate   Bit Depths   Resolutions
Main                 Level 5.1   39 Mbit/s     8           4096x2160@60 - 1920x1080@256
Main Still Picture   Level 5.1   39 Mbit/s                 4096x2160@60 - 1920x1080@256

H.264 Encoder (for comparison):

Adapter #0: 'DG2 Arc A310' Id:22182 (Driver: , Vendor: 32902, SDK Version: 1.255)

Max Bitrate: 234 Mbit/s  ← Correctly shows 234 Mbit/s
Frame Sizes: 32x32...4096x4096
Color Formats: NV12

Profile    Max Level   Max Bitrate   Bit Depths   Resolutions
Baseline   Level 5.2   234 Mbit/s    8           4096x2304@56 - 1920x1080@172
Main       Level 5.2   234 Mbit/s    8           4096x2304@56 - 1920x1080@172
High       Level 5.2   234 Mbit/s    8           4096x2304@56 - 1920x1080@172

Expected Behavior: The Intel Arc A310 should support HEVC hardware encoding at bitrates well above 39 Mbit/s (similar to the 234 Mbit/s shown for H.264). Other media servers (Jellyfin) successfully use hardware encoding on the same GPU with target bitrates exceeding 50+ Mbit/s.

Question: Is this 39 Mbit/s limitation a bug, or an intentional restriction?

I rolled back to 4.9.3 for now.

Not sure how to report this as a bug since I rolled back.

A lot of my movies don't pull any images or NFO data.  I can do it manually, but it's not automatic when I add a file.  I have to browse to the movie and then do the Refresh Metadata -> Replace Images and then it comes right up.  Is there a button or setting I'm missing to do that automatically when a file is added to the library?

Also, if I try and back fill the images by refreshing the metadata on the library and choose "Search for missing metadata" and toggle on "Replace Existing Images", will that leave alone everything that has metadata and images?   I've had to do some manually because they were obscure and I don't want to lose what I've done manually.

I noticed the  hardware transcoding on arm64 CPU isn't supported yet based on https://emby.media/support/articles/apps/linux/Emby-Linux-Platform-Support.html. Then in November 2025, 

 mentioned the support will be ready soon on the beta channel.

Is there any update given 6 months have passed?

Best wishes,

command: systemctl status emby-server
result:
● emby-server.service - Emby Server is a personal media server with apps on just about every device
     Loaded: loaded (/usr/lib/systemd/system/emby-server.service; enabled; vendor preset: enabled)
     Active: failed (Result: core-dump) since Fri 2026-07-31 17:33:43 EDT; 5s ago
    Process: 833452 ExecStart=/opt/emby-server/bin/emby-server (code=dumped, signal=ABRT)
   Main PID: 833452 (code=dumped, signal=ABRT)

Jul 31 17:33:40 webserver emby-server[833452]: Unhandled exception. System.IO.IOException: No space left on device : '/var/lib/emby/logs/embyserver.t>
Jul 31 17:33:40 webserver emby-server[833452]:    at System.IO.RandomAccess.WriteAtOffset(SafeFileHandle handle, ReadOnlySpan`1 buffer, Int64 fileOff>
Jul 31 17:33:40 webserver emby-server[833452]:    at System.IO.Strategies.OSFileStreamStrategy.Write(ReadOnlySpan`1 buffer)
Jul 31 17:33:40 webserver emby-server[833452]:    at System.IO.Strategies.BufferedFileStreamStrategy.FlushWrite()
Jul 31 17:33:40 webserver emby-server[833452]:    at System.IO.FileStream.Flush(Boolean flushToDisk)
Jul 31 17:33:40 webserver emby-server[833452]:    at Emby.Server.Implementations.Logging.FileLogger.Dispose()
Jul 31 17:33:40 webserver emby-server[833452]:    at Emby.Server.Implementations.Logging.SimpleLogManager.Dispose()
Jul 31 17:33:40 webserver emby-server[833452]:    at EmbyServer.Program.Main(String[] args)
Jul 31 17:33:43 webserver systemd[1]: emby-server.service: Main process exited, code=dumped, status=6/ABRT
Jul 31 17:33:43 webserver systemd[1]: emby-server.service: Failed with result 'core-dump'.

I have kept the original installation. Should I remove it? Shouldn't I be able to start the server at the new location given it has plenty of disk space available?