Jump to content

Accès extérieur impossible


Teddytav

Recommended Posts

Teddytav

Bonjour à tous,

 

Malgré de nombreux essais infructueux, je n'ai jamais réussi à me connecter de l'extérieur (4G) via mon application android Emby.

Ma livebox orange autorise les connexion via l'extérieur.

Quand je tente de me connecter, il y a un temps d'attente et à chaque fois le même message :

 

"Erreur de connexion Nous sommes dans l'impossibilité de nous connecter au serveur sélectionné. Veuillez vérifier qu'il est opérationnel et réessayez."

 

Pourtant j'y ai bien accès via le réseau local (Wifi, RJ45)

Voici mon réseau interne avec mon Synology DS216 :

 

https://www.noelshack.com/2020-13-4-1585248482-installation-reseau.jpg

 

j'ai bien installé Emby sur le syno via "Communauté" dans le centre de paquet.

 

 

Merci à vous pour votre aide.

Link to comment
Share on other sites

Teddytav

Je n'y arrive malheureusement toujours pas... Qu'ai je mal fait ?

 

Voici quelques capture d'écran :

 

NAS Synology :

5e8265781d024_Syno01.jpg

 

5e8265928b3b8_Syno02.jpg

 

Puis ma Livebox :

5e8265a91d212_Livebox01.jpg

 

5e8265b84ff2b_Livebox02.jpg

 

 

Que pensez vous déjà de ces réglages ?

 

merci à vous.

Link to comment
Share on other sites

Seger
@@Luke yes tips are available
 
@@Teddytav
before we start talking about Emby, please read up on how to make an external connection to your Nas. 
 
Have you set up a DynDNS address or do you have a fixed IP address?
 
Please first inform yourself how to connect from the outside in general, your screenshots indicate that the problem is not with Emby ;-).  Please use Google search, Synology Forum or Youtube.
 
If you were able to connect via "https://" (including certificate), please feel free to return, I will help you with Emby remote access setup.
 
Thanks and best regards,
Seger
  • Like 1
Link to comment
Share on other sites

Teddytav

Hello @@Seger,

 

Thank you for your Help.

 

I have already access to my synology with external connection. I fixed an IP Adress with DDNS and i connect like this : "    **********.synology.me:5**0    "

 

Like this :

5e83cf9822b0b_SynoAgain01.jpg

 

I opened the firewall on my syno for emby like this :

5e83cfdf74446_SynoAgain02.jpg

 

And i have this in information center :

5e83d01653593_SynoAgain03.jpg

 

On my livebox, i tried everything ahah, first in NAT/PAT Window :

5e83d04a4ed7d_LiveboxAgain01.jpg

 

After in DNS Window :

5e83d0a36b2c5_LiveboxAgain02.jpg

 

But Nothing in livebox's DDNS :

5e83d0cb586b5_LiveboxAgain03.jpg

 

 

Thank you verry much and best regards to,

 

Teddy

Link to comment
Share on other sites

Seger

5e847ce247180_reserveProxy.jpg

 

Teddytav

 
okay, very good... 
 
now you only have to set up a proxy reserve server, because the connection to the Emby server "only" works via https/encrypted you have to redirect from an external https/port (in your case the one from Emby 8920) to an internal http/port (in your case the one from Emby 8096). 
 
This means that you address the synology externally with an https/port, and internally the reserve proxy redirects to http. 
 
Why should you choose this path?
Because Emby is always "only" accessible via ssh/https (i.e. encrypted from the outside) and you cannot permanently embed the certificate into Emby (only via detours). Is this the easiest and safest way for you and many others. 
-> permanent embedding into Emby is already possible, but the path where it is located at Synology is not easily accessible from the mask. 
 
As said before, it is possible through Emby, but Synology may not be as user-friendly here. 
 
By the way: You only need to have the https port open to the outside and you can change it to one of your choice later (in the emby dasboard)
 
If you can't get it right, you can give me access to your synology through a newly created user, and I'll help you remotely.
 
Best regards,
Seger
  
Edited by Seger
Link to comment
Share on other sites

Teddytav

Oh my god, thank you for your help and your time !! ;) ;)

 

I tried like you but look at this : Raaaaaaaaaah

 

5e84ddde72553_Syno12.jpg

In red : "This port number are already used by another application. Please enter a different number"

 

<_< <_<

Link to comment
Share on other sites

Seger
Yeah, sorry was a mistake.

 

Yeah, that's exactly what you do, you just put up, like, 4747

 

if you can't do it yet, enter 8888 at the bottom.

 

Then go to your router and route the 4747 to the internal ip of your diskstation.

 

then go to emby (under network) and take a screenshot of the four fields of the ip numbers.

 

under hostname you can already enter your teddytav.synology.me address.

 

then i tell you which ip port numbers you should enter in the four fields.

 

many greetings,

seger
Link to comment
Share on other sites

Teddytav

Oooookkkkaaayyyy Maybe the victory next time !

I'm here : (If i will sucess, you  can will make a tutorial  "Emby External Access on Synology" @Seger  ;)  )

My entries on Syno :
mini_200401100727318912.jpg
On livebox : I choose the port 8921.  ;)
mini_20040110072763215.jpg
On Emby :
mini_200401100726629024.jpg

mini_200401100726799869.jpg

And now, i came on the phone :
mini_200401100727821432.png


....and nothing, come on....courage !  8-)

Link to comment
Share on other sites

Seger
under Emby in order:

 

Field 1: 8096

 

Field 2: 1111 (please set simple, is only a placeholder)

 

Field 3: 2222 (please set simple, is only a placeholder)

 

Box 4: 8921

 

Emby Save and Restart

Link to comment
Share on other sites

Seger
your emby pictures 

 

there are 4 port numbers in the order, you would like to add these numbers to emby in my order!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...